Pay starts at $18.00 an hour and goes up depending on experience.
Our ideal candidate should have previous experience as a mechanic/technician in the trailer industry. Carpentry, welding and mechanic skills are a plus. We are looking for a self-motivated person with strong work ethics. We are willing to train the right applicant.
Duties will include: Read and understand the jobs and work order per company standards Preventative maintenance and repair all systems on Semi-Trailers to meet the standards set forth by DOT Remove and replace brakes, brake drums, hubs, seals, bearings, races and associated parts Repair electrical and lighting systems Repair or replace chassis components such as springs, spring hangers, equalizers, complete slider assemblies, axles, and sub frames Repair mud flap brackets and dolly leg assembles Repair or replace flooring, rub rails, doors and door trim Repair roofs, panels, nose panels, lower and upper rails Conform to all safety and health standards Assist fellow mechanic technicians
Benefits: Paid time off Paid holidays 401 Medical, Dental, Vision Life Insurance Long and Short Term Disability
Requirements: 1 - 3 years of experience in trailer repair or equivalent experience with welding, carpentry, and mechanic skills Valid driver’s license with a safe driving record. Must furnish own basic hand tools. Ability to stand, walk, bend, crouch, stoop, reach, stretch, step, climb, and / or sit frequently and lift heavy (up to 60lb) throughout the duration of the day Ability to work independently with minimal supervision Attention to detail and highly organized

Direct hire for a Full Time, onsite Equipment Service Mechanic to maintain our Fleet of Electric Forklifts, Pallet Jacks, and Floor Scrubbers for Amigos Meat Distributors Houston Facility. About 90% of our Forklift / Pallet Jack Fleet is electric, and 10% propane powered. The ideal candidate will be able to Troubleshoot, diagnose, and repair Crown models. Includes propane, electric motors, small motors, transmissions, drive axles, differentials, hydraulic systems, brake systems, steering systems, electrical systems, and lifting systems.
Salary range of $800/wk to $1000/wk depends on demonstrated knowledge, skills, abilities and verifiable work experience.
This is an immediate need, direct hire position with Amigos Meats. Your résumé goes directly to the hiring manager. All qualified candidates will be contacted.
Job Responsibilities include but are not limited to: Troubleshoot, diagnose and repair all Fleet Equipment Perform all assigned planned equipment maintenance services Maintain a service log and equipment cabinet of inventory Process paperwork after completion of each job Perform regular routine equipment inspections to identify potential problems and safety concerns and document. Manage your time and work schedule
Schedule: 8-hour shifts M-F Day shifts Weekends (work every other Saturday 8a-12p)
Benefits: Full Medical Dental Vision 401K w/ co. match Vacation Time Sick Time Holiday Pay Short-Term/Long-Term Disability
Qualifications: Minimum 2 years experience as a Forklift repair technician, GSE Technician, or small engine repair technician. Good Mechanical and electrical aptitudes, knowledge of electrical and electronic systems, internal combustion engines, and hydraulic systems. Good written/verbal communication and customer care skills Valid driver's license, good driving record and ability to safely operate lift trucks. Technical degree, previous forklift repair experience, welding experience and knowledge of various types of testing equipment preferred. Salary offered commensurate with knowledge, skills, abilities and verifiable work experience.
Amigos is an Equal Opportunity Employer.

T.G Meat Center is seeking to hire multiple meat cutters. This job requires a person to work in a cold refrigerated warehouse space. These are full-time positions, and we are looking to hire meat cutters with at least 1-2 years experience. Candidates that have experience cutting meat with commercial electric bandsaw are preferred. Work hours are 7am to 4pm, with occasional Saturdays and Overtime. All applicants will be contacted.
Benefits: Full Medical Dental Vision 401K Vacation Time Sick Time Holiday Pay Short-Term/Long-Term Disability
Qualifications: MUST be 18 years or older Able to utilize knives, saws, grinders and other equipment to perform meat cutting and trimming. Demonstrate the ability to identify different meat cuts. Willing to work individually as well as in a team. Maintain a safe environment- Personal Safety and Food Safety. Positive Attitude—makes everyone’s day better, including yours! Willing to learn and follow our processes. Ability to communicate verbally Be able to lift up to 60lbs Be physically able to load & unload a dolly or pallett Manufacturing experience is helpful, but not necessary.
T.G Meat Center  is a second chance employer. EOE. We celebrate diversity and are committed to creating an inclusive environment for all employees.

Provide motor vehicle maintenance for the school bus, general purpose, and utility vehicle fleet.
Job Duties: Diagnose and repair all types of mechanical and electrical problems on school buses and all types of motor vehicles. Be the primary technician assigned to perform preventative maintenance and repairs, both major and minor for 20 School Buses and 20 Support Vehicles. Secure and maintain all assigned tools, parts and equipment. Substitute for any transportation employee as assigned by the supervisor. Maintain accurate records of all work performed. Comply with all safety measures and maintenance procedures as outlined in the department handbook. Substitute as a school bus driver when necessary. Perform other duties as assigned. Operates pressure washers, air compressor, tire machines, wheel balancer, bead setter, air jacks, air tools, grease guns and wrecker.
Qualifications: Minimum Education/Certification High School Graduate or GED. ASE Certification preferred. Must have five years experience working on trucks or buses. Must show proficiency and initiative as an expert mechanic. Possess or be able to obtain valid Class B Texas Commercial Driver’s License with all appropriate endorsements to drive a school bus within 120 days. Possess or be able to obtain valid Class A Texas Commercial Driver’s License will all appropriate endorsements to drive the district wrecker within 180 days. Be able to obtain a Vehicle State Inspection License.
Special Knowledge/Skills: Ability to read and comprehend vehicle maintenance manuals. Ability to operate all types of vehicle maintenance equipment.
The above statements are intended to describe the general purpose and responsibilities assigned to this job and are not intended to represent an exhaustive list of all responsibilities, duties and skills required.

Flowserve is a world-leading manufacturer and aftermarket service provider of comprehensive flow control systems. Join a company whose people are committed to building a more sustainable future to make the world better for everyone. With 16,000+ employees in 50+ countries, we combine our global reach with local presence. Our team challenges themselves to approach each situation with ingenuity and creativity to help provide our customers with the most innovative flow control products and services. We support 10,000+ customers worldwide, creating products to meet the needs of our customers who are supplying energy, fresh water, pharmaceuticals and other essentials to consumers, businesses and governments globally. We invite you to put your talents and career in motion at Flowserve. Company Overview: If a culture of excellence, innovation and ownership is what you’re searching for, consider putting your experience in motion at Flowserve. As an individual contributor, or as a leader of people, your enterprise mindset will ensure Flowserve’s position as the global standard in comprehensive flow control solutions. Here, your opportunity for professional development and industry leading rewards will be supported by our foundational commitments to the values of people first, integrity and safety. Thinking beyond opportunity and reward, at Flowserve, we are inspired by working together to create extraordinary flow control solutions to make the world better for everyone! Role Summary: The CNC Machinist will set up and operate a variety of machine tools to produce precision parts and instruments. Includes precision instrument makers who fabricate, modify, or repair mechanical instruments. May also fabricate and modify parts to make or repair machine tools or maintain industrial machines, applying knowledge of mechanics, mathematics, metal properties, layout, and machining procedures. This will be a 2nd shift opportunity; Overtime may be required. Responsibilities: Operating CNC Machines, BMH, Manual Machines, CNC Lathe, VTLOperating Machine or Equipment – Operate basic equipment and machines and carry out routine tasks.Operations Management – Carry out operational tasks by following established processes.Equipment Maintenance and Repair - Help to maintain and repair equipment by carrying out preparations and providing assistance.Health, Safety and Environment – Follow basic mandatory work instructions to safeguard the environment and the wellbeing of oneself and others.Operational Compliance – Follow a straightforward mandatory procedure to ensure that work is carried out to the required quality standards and/or to ensure adherence to external regulatory codes and internal codes of conduct.Precision Equipment Utilization – Interpret and use precision measuring equipment/instruments such as micrometers, dial indicators, and depth gauges.Instructions and Drawings – Ability to read and interpret blueprints and geometric tolerances.Internal Communications – Exchange information with people by having courteous interactions with them.Policy and procedures - Works with guidance to understand policies and procedures, while making sure they match organizational strategies and objectives.Other duties as assigned. Requirements: Equipment Experience – 2+ years machining experience in a manufacturing or repair environment operating CNC Machines, manual lathes, milling machines.HS Diploma / GED and 3-5 years relevant experience Preferred Experience / Skills: Verbal Communication – Uses clear and effective verbal communication skills to express ideas and request actions.Planning and Organizing – Works with guidance to plan, organize, and prioritize activities to efficiently meet business objectives.Health and Safety - Applies elementary concepts to manage and apply safe systems of work Flowserve offers competitive pay, annual bonuses, medical benefits on day 1, generous paid vacation time, paid holidays, 401(k) and many other excellent benefits Req ID : R-11932 Job Family Group : Operations Job Family : OP Machining EOE including Disability/Protected Veterans. Flowserve will also not discriminate against an applicant or employee for inquiring about, discussing or disclosing their pay or, in certain circumstances, the pay of their co-workers. Pay Transparency Nondiscrimination Provision If you are a qualified individual with a disability or a disabled veteran, you have the right to request a reasonable accommodation if you are unable or limited in your ability to use or access flowservecareers. com as result of your disability. You can request a reasonable accommodation by sending an email to employment@flowserve. com. In order to quickly respond to your request, please use the words "Accommodation Request" as your subject line of your email. For more information, read the Accessibility Process.

POSITION OVERVIEW: Guitar Center embodies the world of creativity and music by encouraging staff to find their own individual sound. Our mission is to develop and nurture lifelong musicians and make a difference in the world by enabling musicians and non-musicians alike to experience the joy that comes from creating music. We believe in creating inclusive environments that put our customers first all the while fulfilling our mission.As our Repair Tech (Guitar), you will provide perform maintenance and repair services on customer-owned instruments and to assist in maintenance of specific store inventory, continually building and increasing the business through great customer experience and quality work.A few special characteristics that make our Repair Technicians successful:Customer Focus: Understands customer service principles, and able to provide an excellent customer experience. Able to connect with customers in a meaningful way. Is approachable, genuine, knowledgeable, encouraging, passionate, and committed to helping customers. Able to step in to handle customer service issues.Initiative: Able to identify opportunities & issues and follow through on work activities to capitalize or resolve them. Able to learn quickly and take positive action without being requested to do so. Able to develop knowledge and skills including product, store operations, sales and leadership.Selling: Able to work through GC certification program to gain a base understanding of products and sales techniques.Training: Able to effectively train learners and communicate info and techniques so that they are retained.As our Repair Technician, you will:Interact with customers, ensuring a positive customer experienceService customer-owned instruments with a high level of craftsmanshipMaintain store owned gear, as requestedComplete warranty repair workAdditional duties as assignedWhy Guitar Center Here's just some of the rewards:For our employees who are musicians we offer the unique opportunity of gig leave--take time off to share your music with the world and return to your job after your tour! Guitar Center offers robust benefits and perks, including Medical, Dental, Vision, 401K plus company match, mental health support, paid sick/holiday/vacation time, employee discount program, and tuition reimbursement options.Requirements: Skilled understanding of repairing Guitars Preferences:Foundational product knowledge on Guitar Center products Guitar Center is an Equal Opportunity Employer and provides fair and equal employment opportunity to all employees and applicants regardless of race, color, religion, gender, sexual orientation, gender identity, national origin, age, disability, veteran status or any other protected status prohibited under Federal, State, or local laws. All employment decisions are based on valid job-related requirements.If you are a qualified individual with a disability or a disabled veteran and are unable or limited in your ability to use or access our website, you may request a reasonable accommodation to express interest in a specific opening. You can request reasonable accommodation by calling 1-ext. 2862 or by sending an email to .

Hiring a 1099 Independent Contractor Immediately! Flexible work environment. Set your own hours, work with minimal guidance, be your own boss! OPENLANE is searching for an Independent Contractor for vehicle inspections. The Independent Contractor will provide vehicle inspection services at car dealerships. The Independent Contractor must have a minimum of 5 years of automotive experience as a vehicle mechanic or equivalent mechanical background. Required: A working iPhone with a data plan,(We do not currently support Android devices to perform inspections) a basic OBD II scanner, reliable transportation, and valid driver's license. Some of the perks include: Make good money in an exciting fieldBe your own boss and set your own hoursFlexible work environmentAbility to work with minimal guidance and supervision

Overview: ConGlobal is hiring immediately for a key position within our global supply chain. We offer great benefits, competitive pay and opportunities for future career growth. The starting pay is $30.00-34.00!#PR Responsibilities: As a Heavy Equipment Mechanic, you are responsible for assessing and repairing heavy duty lift equipment at the railyard as well as performing maintenance and mechanical repairs on side loaders (loaded container handler), hostlers (semi tractor), forklifts and support equipment. Qualifications: 1-3 years of heavy equipment mechanic / service technician experience requiredPrevious crane mechanic experience a plusHydraulic systems experience required (pumps, valves, motors, filters, and hoses)Driveline component repair experience (axles, bearings, ring, etc.)Ability to work in various weather conditionsAbility to work in a safety focused environmentAbility to lift 50lbsMust have a Valid Driver’s LicenseMust pass a pre-employment background verification, physical and drug screening.The Federal Rail Administration sets and enforces safety regulations and standards for railroad operations. Use of cannabis is strictly prohibited. If applicable for the position you are applying to, and if you are offered the position, you will have to take and pass a drug screen.We offer competitive pay, medical/dental/vision benefits, 401(k), paid training, career advancement and more.

Req ID:448834Address: 612 Pederson Rd Katy, TX, 77494Benefits: * Fuel Your Growth with Love's - company funded tuition assistance program* Paid Time Off * Flexible Scheduling * 401(k) – 100% match up to 5% * Medical/Dental/Vision Insurance after 30 days * Competitive Pay * Career Development * Hiring Immediately Welcome to Love’s!Diesel Technicians work in a fast-paced environment and maintain clean places with friendly faces. You will interact with customers & drivers from all over, making their travels and their day better. Job Functions: Troubleshoot and repair light mechanical issues that may include wheel-end assemblies, electrical systems, suspensions, A/C, or engine componentsAssist customers with roadside servicesProvide preventative maintenance servicesAbility to move, lift 75+ pounds working in close quarters. Ability to work in various temperatures.Always put the safety and satisfaction of your customers first, complying with company safety policies & procedures.Work a rotating schedule that alternates between day and night as needed.Ability to obtain a medical card through the Department of Transportation. (paid by Love’s) Our Culture:Come see why Love’s Travel Stops and Country Stores was recognized by Indeed as the winner of the Better Work Award in 2023.Love’s Travel Stops and Country Stores is an Equal Opportunity Employer. Veterans encouraged to apply.Love’s has been fueling customers’ journeys since 1964. Innovation and perseverance continue to lead the way for the family-owned and -operated business headquartered in Oklahoma City with more than 40,000 team members in North America and Europe. The company’s core business is travel stops and convenience stores with more than 630 locations in 42 states. Love’s continues its commitment to offer products and services that provide value for professional drivers, fleets, four-wheel customers, RVers, alternative fuel and wholesale fuel customers. Giving back to communities Love’s serves and maintaining an inclusive and diverse workplace are hallmarks of the company’s award-winning culture. The Love’s Family of Companies includes:Gemini Motor Transport, one of the industry’s safest trucking fleets.Speedco and Love’s Truck Care, the largest oil change and preventive maintenance and total truck care network.Musket, a rapidly growing, Houston-based commodities supplier and trader.Trillium, a Houston-based alternative fuels expert.TVC Pro-driver, a commercial driver’s license (CDL) protection subscription service.

AutoReqId: 21010BR Pay Class: Hourly Hourly Pay Rate: 24.29/HR Department: Maintenance Line of Business: Aggregates Position Type: Full-Time Job Posting: Heidelberg Materials is seeking a Plant Maintenance Mechanic for our Sealy Sand & Gravel plant located in Sealy, TX. Heidelberg Materials provides the materials to build our future. Our future is sustainable. Our future is digital. And it goes beyond cement, aggregates and ready-mixed concrete. Heidelberg Materials North America operates more than 450 locations with approximately 9,000 employees in the U.S. and Canada. What You'll Get To Do Repair and maintain, in accordance with diagrams, sketches, operation manuals, and manufacturer's specifications, machinery and mechanical equipment, such as engines, motors, pneumatic tools, conveyor systems, and production machines and equipment, using hand tools, power tools, and precision measuring and testing instrumentsObserve mechanical devices in operation and listen to their sounds to locate causes of troubleLubricate machinery, change parts, or perform other routine machinery maintenanceReassemble machines after the completion of repair or maintenance workStart machines and observe mechanical operation to determine efficiency and to detect problemsInspect or test damaged machine parts, and mark defective areas or advise supervisors of repair needsLubricate or apply adhesives or other materials to machines, machine parts, or other equipment, according to specified proceduresInstall, replace, or change machine parts and attachments, according to production specifications What We Are Looking For High School Diploma or equivalent requiredMaintenance experience (or formal technical training), troubleshooting and repairKnowledge of hydraulics and pneumaticsAvailable to work flexible hours, days as well as an excess of 40 hrs. per week as neededKnowledge of mechanical moving parts (chains, bearings and rollers)Ability to use a variety of hand tools, power tools, shop machines, hoists, etc.Ability to read and fabricate from drawingsPhysical Requirements: sitting, standing, walking, pushing, pulling, twisting, climbing, balancing, bending (bending at the waist, lifting above the waist and lifting below the waist), kneeling, reaching, grasping (use of both hands), squatting, repetitive motions, manipulative finger movements with both hands, use of wrists (flexing or rotating with both wrists), use of both feet, use of arms above and below shoulder, work extended periods of time in same position, perform duties in all climates i.e. weather, extreme temperatures, tolerate heights, lift and carry up to 75 lbs., work in confined spaces, capable of wearing respiratory and other personal protective equipmentWeld and torch certification a plusMSHA Part 48 Training a plus No search firms please Heidelberg Materials is a Drug Free Workplace Employer Statement: Equal Opportunity Employer - Minority / Female / Veteran / Disabled

COMPANY OVERVIEWAs the nation's largest producer of clean, carbon-free energy, Constellation is a company purposely-built to meet the challenges of the climate crisis. Constellation has been the leader in clean energy production for more than a decade and we are growing our company and capabilities. Now, we're accelerating, speeding our low-carbon or no-carbon power to more people in more places, day and night, providing our customers and communities with options to buy, manage and use energy as part of their decarbonization mission. The race is on to confront the climate crisis and Constellation is ready to meet the challenge. Come join us as we lead energy, together.TOTAL REWARDSConstellation offers a wide range of benefits and rewards, designed to help our employees thrive professionally and personally. In addition to highly competitive salaries, we offer a bonus program, 401(k) with company match, employee stock purchase program comprehensive medical, dental and vision benefits, including a robust wellness program paid time off for vacation, holidays and sick days and much more.This role will be considered for the O&M Tech level II and III. Leveling will be based on candidates past work experience. Hourly rate starts at $34.19 - $55.30, depending on level of experience. Power Plant Mechanic - Operations and Maintenance TechnicianPRIMARY PURPOSE OF POSITIONThe primary responsibilities of this role will be to operate, troubleshoot, repair and maintain all mechanical,I/C, and electrical high voltageequipment with as required to support plant operations and maximize asset value.PRIMARY DUTIES AND ACCOUNTABILITIESUses computerized maintenance management system to maintain and control work order system spare parts inventory. Perform maintenance and repair work on plant equipment such as pumps, gearboxes, fans, turbines, bearings, boilers, pipe systems, valves and limitorque operators. (disassembly, part repair or replacement, assembly).Operates monitors and maintains turbines, generators, pumps, scrubber plants, industrial wastewater treatment plants, boilers, motors, combustion turbines and associated auxiliary equipment.Trains and develops other employees in performing preventive maintenance and routine equipment service activities. Practices situational leadership, environmental and safety stewardship.Leads equipment or system problem identification and recommends solutions.Perform predictive/preventive maintenance.Perform electrical maintenance on generators, transformers and MOV&rsquos.Perform troubleshooting on plant equipment such as power and control circuits, heaters, motors and transformers using electrical test instruments.Develops operating procedures for plant equipment to ensure consistent and safe operation.Performs all work during an assigned shift in a safe, continuous and efficient manner while maintaining environmental and housekeeping standards within federal, state and local guidelines. Performs work per Work Management processes and ensures safety using equipment Tag out process.Assists in requisitioning parts and supplies.Perform any other duties as assigned.POSITION SCOPEThe incumbent in this position must be able to communicate across all levels of the organization. Good knowledge of PLC's, Ovation and GE Mark 6 Digital Controls Systems.Qualifications - ExternalMINIMUM QUALIFICATIONSAssociates' Degree in Power Plant Technology, Engineering Technology, or Electronics ORHS Diploma with minimum of 18 months of trade or technical training in Power Plant TechnologySuccessfully complete the training requirements and time in job requirements for the position including previously passing the EEI TECH testElectrical backgroundAvailability for Day shift work and overtime as requiredGood oral and written communication skillsBasic computer skillsUnderstanding of power plant printsValid driver's license and access to an insured vehicleAbility to work in a power plant environment that includes climbing and walking long distancesAbility to lift a minimum of 50 pounds

Job DescriptionUnleash your potential with the Johnson Controls team!As a global leader in smart, healthy and sustainable buildings, our mission is to reimagine the performance of buildings to serve people, places and the planet.Join our winning team and pave the way for a bright future.With our extensive reach across various industries worldwide, our teams are uniquely positioned to support and empower you. You will have the opportunity to develop yourself through meaningful work projects and learning opportunities. We strive to provide our employees with an experience, focused on supporting their physical, financial, and emotional wellbeing.Join the Johnson Controls family and thrive in a culture that values your voice and ideas.Your next incredible opportunity is just a few clicks away!What you will doWe are looking for a skilled Journeymen Chiller Mechanic who has worked in commercial, industrial, and/or institutional markets to join our team. Candidates should have a minimum of five years’ chiller experience, with knowledge of maintenance procedures, troubleshooting, and rebuilds of medium-large tonnage chillers of all brands.How you will do itYou will be assigned primary service accounts and responsibility for executing contract maintenance visits, inspections, site assessments, service requests and recommending necessary upgrades or repairs in order to prolong the equipment life cycle of our customers equipment.You will establish & maintain a positive relationship with customers, vendors and co-workers through effective oral and written communication skills via phone, computer, and face to face.You will be expected to provide quote estimates for labor & material repairs and upgrades as needed.You will represent the company by serving as the direct customer contact and be responsible for servicing products and equipment on assigned projects, ensuring customer satisfaction by identifying, analyzing, diagnosing and repairing equipment and systems at customer’s location.You will be required to use cutting-edge software and technology, along with a variety of hand-tools, rigging equipment, following blueprints or engineering specifications, to diagnose and repair equipment.You will be expected to continually enforce safety to the highest standards and maintain security and accountability of company issued and procured assets by recording use, wear and conditions.You will be expected to work as part of a team who is dedicated to delivering the highest standard of service to all its customers which may require the flexibility to work overtime and weekends as the business requires, including occasional overnight stays.You will be added to our on-call rotations, since we are a 24/7 service company.What we look forRequiredThree years of commercial, industrial, and/or institutional experience with all types of chillers, various compressor technologies, chiller control systems, and speed drives.Requires Mechanical Journeyman status.Member of Local Union 286 or willing to join.Operating knowledge of Microsoft Office software and working proficiency with handheld computers (i.e. smartphones, iPads).Adherence to company safety program.Valid driver's license.Appropriate licenses to work with refrigerant, boiler, and steam operational & service knowledge.EPA Universal Refrigerant Certification.Good verbal and written communication skills.Must be able to be on call nights and weekends on a schedule-rotating basis.PreferredMore than 5 years of commercial, industrial, and/or institutional experience with all types of chillers, various compressor technologies, chiller control systems, and speed drives.**This is a Bargaining Unit Position.

FORTIFYING OUR DEFENSESMissiles and rockets are critical components of our national defense strategy. Responsible for servicing and maintaining them, Missile and Space Systems Maintenance specialists ensure these assets are fully operational at all times. From missile launchers to space lift boosters, these highly knowledgeable experts plan, organize and perform every service necessary to keep these systems in pristine working condition so they’re ready when we need them.REQUIREMENTSYou must meet several requirements before joining the Air Force. These concern your background, overall health and other standards set by the Air Force, Department of Defense and federal law.Minimum EducationYou must be 17–42 years of age, a U.S. citizen and obtain a qualifying ASVAB score. Applicants who are non-graduates or non-alternate credential holders must obtain an AFQT Test score of 65 or higher on the ASVAB ASVAB REQUIREMENTSElectronicsQualificationsKnowledge of electronic theoryCompletion of a current Single Scope Background Investigation (SSBI)Completion of 7.5 weeks of Basic Military TrainingMust be at least 17, but has not reached age 42 on the date of enlistment

Equipment Mechanic (not heavy) We are seeking an energetic Equipment Mechanic to join our La Porte, TX team, who can change direction at a moment’s notice to maintain all mobile equipment to include but not limited to repairs, diagnosis, and troubleshooting. Performs daily preventative maintenance as assigned by supervisor. Health and Safety is our #1 priority and we live it 3-6-5!Competitive pay and benefitsComprehensive health benefits coverage after 30 days of full-time employmentGroup 401K with company matching componentOpportunities for growth and development for all the stages of your careerGenerous paid time off, company paid training and tuition reimbursementPositive and safe work environmentsEnsures Health and Safety is the number one goal by following policies, processes, and acting in a safe manner at all timesDisassemble/Reassemble heavy and mobile equipment to troubleshoot, diagnose and repairFabricate metal pieces and replace gaskets as neededTroubleshoot, repair and test all equipment to ensure functionalityUtilize propylene cutting rigRepair equipment using MIG and/or stick weldingOther duties as assignedEnter data for repairs, diagnosis, preventative maintenance, inventory check out and timeComplete daily work and training on computersWhat does it take to work at Clean Harbors High School Diploma or equivalent3+ years’ experience with mobile equipment repairDiesel Certification requiredAir Conditioning Certification or equivalent requiredCaterpillar or Kubota certifications or education a plus!Hydraulics Systems repairMust understand schematics to troubleshoot 12&24v systemsAbility to use a cutting rig (propylene cutting torch)Valid Drivers’ LicenseComputer literateJoin our team today! To learn more about our company, and to apply online for this exciting opportunity, visit us athttps://careers.cleanharbors.com/Clean Harborsis the leading provider of environmental, energy and industrial services throughout North America. The Company serves a diverse customer base, including a majority of the Fortune 500 companies, thousands of smaller private entities and numerous federal, state, provincial and local governmental agencies. Through its Safety-Kleen subsidiary, Clean Harbors also is a premier provider of used oil recycling and re-refining, parts washers and environmental services for the small quantity generator market. Headquartered in Norwell, Massachusetts, Clean Harbors has waste disposal facilities and service locations throughout the United States and Canada, as well as Mexico and Puerto Rico.We are an equal opportunity in employer to all individuals regardless of race, color, religion, sex, age, national origin, pregnancy, familial status, disability status, veteran status, citizenship status, genetic information or any other characteristic protected under Federal, State or Local law.Clean Harbors is a Military & Veteran friendly company.*CH #LI-MM1

D&S Community Services, a part of the Sevita family, provides community-based services for individuals with intellectual and developmental disabilities. Here we believe every person has the right to live well, and everyone deserves to have a fulfilling career. You’ll join a mission-driven team and create relationships that motivate us all every day. Join us today, and experience a career well lived.Maintenance AssociateHouston, TX Pay: $18/ hourSchedule: Monday - Friday 8a-4:30p Your Role Providing repair and upkeep services for the residences of our clients, which may involve troubleshooting plumbing or electrical problems, fixing appliances, etc.Conducting inspections and addressing damages in different parts of buildings.Performing painting and surface refinishing tasks.Applicants must possess their own tools for the tasks.Assisting with basic vehicle maintenance, such as changing a flat tire or replacing a brake light bulb. Qualifications: High School diploma or equivalentApplicants must possess their own toolsMinimum 1 year of related experienceWorking knowledge of and ability to handle all maintenance and electrical equipmentAbility to manage/prioritize multiple tasksEffective communication skills and well-developed problem-solving skillsExceptional attention to detail and a commitment to quality in everything you do Why Join Us Full, Part-time, and As-Needed schedules availablePaid Time Off and Health benefits to employees working a minimum of 30 hours/weekPaid training and holiday payCareer development and advancement opportunities across a nationwide networkWork with some of the best co-workers you could ask for and see your impact on the lives of those individuals we serveSince our funding comes from Federal and State payers, we offer stability and secure work opportunities We have meaningful work for you – come join our team – Apply Today!Sevita is a leading provider of home and community-based specialized health care. We believe that everyone deserves to live a full, more independent life. We provide people with quality services and individualized supports that lead to growth and independence, regardless of the physical, intellectual, or behavioral challenges they face. We’ve made this our mission for more than 50 years. And today, our 40,000 team members continue to innovate and enhance care for the 50,000 individuals we serve all over the U.S. As an equal opportunity employer, we do not discriminate on the basis of race, color, religion, sex (including pregnancy, sexual orientation, or gender identity), national origin, age, disability, genetic information, veteran status, citizenship, or any other characteristic protected by law.

We are seeking a skilled Lead HVAC Technician to join our facilities maintenance team. In this role, you will be responsible for the installation, maintenance, and repair of heating, ventilation, air conditioning, and refrigeration systems. The ideal candidate will have a strong technical background, excellent problem-solving skills, and the ability to work independently.Responsibilities:Inspect, repair, and install HVAC equipment including compressors, condensers, chillers, and cooling towersConduct preventive maintenance inspections and make necessary adjustmentsReplace defective parts in units and their controlsInstall, rebuild, or repair fans, motors, thermostats, and other componentsOperate hand and power tools, welding equipment, and test instrumentsPerform skilled electrical maintenance work on HVAC components and wiring systemsCalibrate systems and perform preventive maintenanceAdhere to health and safety regulationsMaintain equipment in safe working conditionFollow applicable building codes and regulationsMaintain records of time, labor, and materials usedPrepare reports as requiredQualifications:Minimum requirements:4+ years of documentable HVAC journeyman level experience, including HVAC and refrigeration system theory and practicesFamiliarity with applicable building codes and regulationsPreferred requirements:Ability to read and follow technical instructionsStrong problem-solving and diagnostic skillsPost-secondary education in HVAC technologyExperience with building automation systemsKnowledge of energy efficiency practices in HVAC systemsCertification in refrigerant handlingExperience with commercial and industrial HVAC systems#HVACjobs

About us:Working at Target means helping all families discover the joy of everyday life. We bring that vision to life through our values and culture. .A role in a Supply Chain Facility means being on the very front lines of getting product to the guest as fast as possible—a critical differentiator and one of the most essential Logistics functions. You’ll reach beyond the bounds of your team to partner across the enterprise and find solutions to support the business. Whether it’s through focusing on our regional or upstream distribution centers, import warehouses, or fulfillment and flow centers, you’ll have a chance to positively impact thousands of fellow team members and Target guests worldwide, further differentiating Target from all the rest.As a Seasonal Facility Attendant, you will perform a wide variety of minor maintenance tasks in addition to all other duties as assigned pertaining to the general upkeep and maintenance of the Distribution Center. You will help Maintenance Mechanics perform light mechanical work such as servicing and repair of hand tools and minor floor machines. You will assist maintenance personnel in installation/removal of various items of equipment throughout the distribution center. You will change batteries, perform all maintenance on battery charger, keep battery equipment clean and painted, keep battery changing records and turn in records at shift end. You’ll perform light carpentry work such as building racks, shelving and repairing workbenches as well as completing minor plumbing tasks such as repairing of faucets and landscape sprinklers. You will clean stopped drains and clean sumps and drains as needed. You will perform miscellaneous work such as plastering repairs, concrete patching or minor concrete replacement. You will assist in all duties related to the preventive maintenance programs, such as pest control, and update records associated with these programs. You’ll paint necessary areas, touch up all equipment as needed, remove cardboard bales from baler, and operate snow removal equipment to clean all walks, roads and parking lots as assigned. You will fill out necessary paperwork or requisitions for materials as requested, keep daily work order logs for all work, clean the warehouse using sweeper and scrubber power equipment, remove trash from building using large portable dumpsters, and keep building grounds in a neat and orderly manner. You will operate Target owned vehicles to execute yard cleanup, respond to yard incidents, escort vendors, and pick up parts and materials as required. You will operate all power equipment in safe manner, use safe lifting techniques at all times and promptly assist in spill clean up to avoid risk of accidents to team members throughout the facility. Core responsibilities of this job are described within this job description. Job duties may change at any time due to business needs.About you: Possess or ability to obtain a valid driver’s licenseAble to work both independently and in a team environmentEffective communication skillsAccurately uses basic math skillsAble to be certified to operate all power equipmentAble to use maintenance tools; saws, drills, etc.Able to read labels, tickets, instructions, etc.Able to lift and carry merchandise/equipment weighing up to 47 lbs. regularly and up to 60 lbs. on an infrequent basisAble to work with minimal supervision and self-motivateFind competitive benefits from financial and education to well-being and beyond at.Americans with Disabilities Act (ADA)In compliance with state and federal laws, Target will make reasonable accommodations for applicants with disabilities. If a reasonable accommodation is needed to participate in the job application or interview process, please reach out to candidate.accommodations@HRHelp.Target.com.

POSITION OVERVIEW: Guitar Center embodies the world of creativity and music by encouraging staff to find their own individual sound. Our mission is to develop and nurture lifelong musicians and make a difference in the world by enabling musicians and non-musicians alike to experience the joy that comes from creating music. We believe in creating inclusive environments that put our customers first all the while fulfilling our mission.As our Repair Tech (Guitar), you will provide perform maintenance and repair services on customer-owned instruments and to assist in maintenance of specific store inventory, continually building and increasing the business through great customer experience and quality work.A few special characteristics that make our Repair Technicians successful:Customer Focus: Understands customer service principles, and able to provide an excellent customer experience. Able to connect with customers in a meaningful way. Is approachable, genuine, knowledgeable, encouraging, passionate, and committed to helping customers. Able to step in to handle customer service issues.Initiative: Able to identify opportunities & issues and follow through on work activities to capitalize or resolve them. Able to learn quickly and take positive action without being requested to do so. Able to develop knowledge and skills including product, store operations, sales and leadership.Selling: Able to work through GC certification program to gain a base understanding of products and sales techniques.Training: Able to effectively train learners and communicate info and techniques so that they are retained.As our Repair Technician, you will:Interact with customers, ensuring a positive customer experienceService customer-owned instruments with a high level of craftsmanshipMaintain store owned gear, as requestedComplete warranty repair workAdditional duties as assignedWhy Guitar Center Here's just some of the rewards:For our employees who are musicians we offer the unique opportunity of gig leave--take time off to share your music with the world and return to your job after your tour! Guitar Center offers robust benefits and perks, including Medical, Dental, Vision, 401K plus company match, mental health support, paid sick/holiday/vacation time, employee discount program, and tuition reimbursement options.Requirements: Skilled understanding of repairing Guitars Preferences:Foundational product knowledge on Guitar Center products Guitar Center is an Equal Opportunity Employer and provides fair and equal employment opportunity to all employees and applicants regardless of race, color, religion, gender, sexual orientation, gender identity, national origin, age, disability, veteran status or any other protected status prohibited under Federal, State, or local laws. All employment decisions are based on valid job-related requirements.If you are a qualified individual with a disability or a disabled veteran and are unable or limited in your ability to use or access our website, you may request a reasonable accommodation to express interest in a specific opening. You can request reasonable accommodation by calling 1-ext. 2862 or by sending an email to .

Flowserve is a world-leading manufacturer and aftermarket service provider of comprehensive flow control systems. Join a company whose people are committed to building a more sustainable future to make the world better for everyone. With 16,000+ employees in 50+ countries, we combine our global reach with local presence. Our team challenges themselves to approach each situation with ingenuity and creativity to help provide our customers with the most innovative flow control products and services. We support 10,000+ customers worldwide, creating products to meet the needs of our customers who are supplying energy, fresh water, pharmaceuticals and other essentials to consumers, businesses and governments globally. We invite you to put your talents and career in motion at Flowserve. Company Overview: If a culture of excellence, innovation and ownership is what you’re searching for, consider putting your experience in motion at Flowserve. As an individual contributor, or as a leader of people, your enterprise mindset will ensure Flowserve’s position as the global standard in comprehensive flow control solutions. Here, your opportunity for professional development and industry leading rewards will be supported by our foundational commitments to the values of people first, integrity and safety. Thinking beyond opportunity and reward, at Flowserve, we are inspired by working together to create extraordinary flow control solutions to make the world better for everyone! Role Summary: The Field Service Technician installs, commissions, monitors, troubleshoots, and repairs Flowserve’s pumps, seals, and other equipment across industries such as oil and gas, chemical, nuclear, coal, and wastewater industries, depending on the customer engagement. In this challenging position the Field Service Technician (FST) provides real-time technical support to our customers, and provides recommendations for repairs, upgrades, and replacement equipment. The FST is actively engaged in troubleshooting problems and implementing solutions onsite at nearby customer facilities. Our Field Service Technician team is the face of Flowserve, and we count on them to deliver a world-class service to our customers, creating a lasting competitive advantage for our products and services. Responsibilities: Make direct, in-person service calls in response to customer requests.Assess mechanical problems and take actions to resolve promptly.Work side-by-side with our customer’s personnel, and lead work crews as required.Oversee the full cycle of repair: disassembly, cleaning, inspection, repair, and assembly.Ensure that equipment is installed successfully and on schedule.Check equipment prior to start-up and assess start-up performance.Monitor the maintenance and performance of Flowserve equipment.Train customers in the proper procedures for operating and maintaining Flowserve products.Collaborate effectively with the supporting organizations of Flowserve, including the repair centers, customer service, and sales engineering.Maintain and submit organized, accurate records, including daily reports, jobs quoted, jobs performed, and time and materials charged.Knowledgeable about the industrial applications and operations of pumps, valves, seals, actuators, and mechanical equipment.Experience with installing mechanical equipment.Experience with repairing pump equipment, installing mechanical seals, changing seal faces/gaskets/O rings.Proven ability to correctly read and interpret blueprints, engineering drawings, and schematicsMust be a self-starter with good follow-through, capable of working independently with little supervision.Capable in Outlook, Word, and ExcelAn active driver’s license with a good driving record is essential to the role.Able to travel, including globally, for extended periods of timeAble to work overtime as required to minimize impact to customersPhysical activity is required, including frequent lifting up to 50 pounds / 25kg, ascending/descending ladders and staircases, and climbing and reaching in, under, and around large equipment, often outside year-round.Excellent communication skillsGood organizational skillsCommunicate by word and actions Flowserve’s values for ethics, safety, and qualityOther duties as assigned. Requirements: Professional certifications in this field.Experience working with ValuesAbility to work collaboratively with unfamiliar teams.HS Diploma / GED and 3-5 years relevant experience Flowserve offers competitive pay, annual bonuses, medical benefits on day 1, generous paid vacation time, paid holidays, 401(k) and many other excellent benefits Req ID : R-12061 Job Family Group : Operations Job Family : OP Field Service EOE including Disability/Protected Veterans. Flowserve will also not discriminate against an applicant or employee for inquiring about, discussing or disclosing their pay or, in certain circumstances, the pay of their co-workers. Pay Transparency Nondiscrimination Provision If you are a qualified individual with a disability or a disabled veteran, you have the right to request a reasonable accommodation if you are unable or limited in your ability to use or access flowservecareers. com as result of your disability. You can request a reasonable accommodation by sending an email to employment@flowserve. com. In order to quickly respond to your request, please use the words "Accommodation Request" as your subject line of your email. For more information, read the Accessibility Process.

Hiring a 1099 Independent Contractor Immediately! Flexible work environment. Set your own hours, work with minimal guidance, be your own boss! OPENLANE is searching for an Independent Contractor for vehicle inspections. The Independent Contractor will provide vehicle inspection services at car dealerships. The Independent Contractor must have a minimum of 5 years of automotive experience as a vehicle mechanic or equivalent mechanical background. Required: A working iPhone with a data plan,(We do not currently support Android devices to perform inspections) a basic OBD II scanner, reliable transportation, and valid driver's license. Some of the perks include: Make good money in an exciting fieldBe your own boss and set your own hoursFlexible work environmentAbility to work with minimal guidance and supervision

AutoReqId: 20168BR Pay Class: Hourly Hourly Pay Rate: $25.00 - $27.00 DOE Department: Maintenance Line of Business: RMC (Ready-Mix Concrete) Position Type: Full-Time Job Posting: Heidelberg Materials is seeking a Maintenance Mechanic for our South Texas Concrete facility located in Houston, TX. Heidelberg Materials provides the materials to build our future. Our future is sustainable. Our future is digital. And it goes beyond cement, aggregates and ready-mixed concrete. Heidelberg Materials North America operates more than 450 locations with approximately 9,000 employees in the U.S. and Canada. What You'll Get To Do Inspect equipment for proper functional use and perform preventative maintenance duties per manufacture’s specifications.Upgrade areas with new equipment/technology.Maintain current written or data input spreadsheets on all equipment repairs.Inspect, diagnose, and perform repair and maintenance of all plant equipment, using a variety of hand tools, power tools, shop machines, hoists, etc.Install and replace bearings, speed reducers, shafts, pulleys, idlers, motors, couplings, etc.Make major repairs to crushers, changing jaw dies, bearings, bushings, crusher mantles, etc.Repair conveyor belts, feeders, and hydraulic systems.Proficiently work with outside contractors on special projects.Have a willingness to operate individually or within the constraints of a team environment. What We Are Looking For Minimum of 5 years of experience (or formal technical training) mechanical troubleshooting and repair2+ years of diversified welding experienceMust have knowledge of hydraulics and pneumaticsMust have knowledge of mechanical moving parts (chains, bearings and rollers)Must be proficient at both ARC and MIG weldingMust be able to read and fabricate from drawingsMust be flexible to work occasional evenings or weekends to meet production requirements as needed. No search firms please Heidelberg Materials is a Drug Free Workplace Employer Statement: Equal Opportunity Employer - Minority / Female / Veteran / Disabled

At Constellation, a freshly independent and soon-to-be Fortune 200 company, we're providing the energy and services to transform our future. Combining next generation technologies and product offerings with the country's lowest carbon generating fleet, our company is purpose-built to meet the challenges of the climate crisis.Constellation has been the leader in clean energy production for more than a decade. Now we're speeding delivery of low-carbon or no-carbon power to help families, communities, governments, and businesses meet their sustainability and decarbonization goals. Constellation provides 10 percent of total clean power and 22 percent of clean baseload power in the United States and is the leading competitive retail supplier of energy products, services and clean energy solutions. The race is on to confront climate change, and no company is more ready to meet that challenge.We are committed to advancing diversity, equity and inclusion and believe in attracting, retaining and advancing employees who will best serve and represent our customers, partners and communities. We provide a workplace that ensures mutual respect, where each individual has the opportunity to grow and contribute at their greatest potential. Constellation will provide you the tools and resources you need to design, build and power a successful career.Constellation offers a wide range of benefits, designed to help our employees thrive professionally and personally. In addition to highly competitive salaries, we offer a bonus program, 401(k) with company match, employee stock purchase program comprehensive medical, dental and vision benefits, including a robust wellness program paid time off for vacation, holidays and sick days and much more. Power Plant Instrumentation and Controls - Operations and Maintenance TechnicianPRIMARY PURPOSE OF POSITIONThe primary responsibilities of this role will be to operate, troubleshoot, repair and maintain all mechanical,I/C, and electricalequipment as required to support plant operations and maximize asset value.Hourly Rate Starts at $34.19 - $55.30, depending on level of experiencePRIMARY DUTIES AND ACCOUNTABILITIESUses computerized maintenance management system to maintain and control work order system spare parts inventory. Perform maintenance and repair work on plant equipment such as pumps, gearboxes, fans, turbines, bearings, boilers, pipe systems, valves and limitorque operators. (disassembly, part repair or replacement, assembly).Operates monitors and maintains turbines, generators, pumps, scrubber plants, industrial wastewater treatment plants, boilers, motors, combustion turbines and associated auxiliary equipment.Trains and develops other employees in performing preventive maintenance and routine equipment service activities. Practices situational leadership, environmental and safety stewardship.Leads equipment or system problem identification and recommends solutions.Perform predictive/preventive maintenance.Perform electrical maintenance on generators, transformers and MOV&rsquos.Perform troubleshooting on plant equipment such as power and control circuits, heaters, motors and transformers using electrical test instruments.Develops operating procedures for plant equipment to ensure consistent and safe operation.Performs all work during an assigned shift in a safe, continuous and efficient manner while maintaining environmental and housekeeping standards within federal, state and local guidelines. Performs work per Work Management processes and ensures safety using equipment Tag out process.Assists in requisitioning parts and supplies.Perform any other duties as assigned.POSITION SCOPEThe incumbent in this position must be able to communicate across all levels of the organization. Good knowledge of PLC's, Ovation and GE Mark 6 Digital Controls Systems.Qualifications - ExternalMINIMUM QUALIFICATIONSAssociates' Degree in Power Plant Technology, Engineering Technology, or Electronics ORHS Diploma with minimum of 18 months of trade or technical training in Power Plant TechnologySuccessfully complete the training requirements and time in job requirements for the position including previously passing the EEI TECH testElectrical backgroundAvailability for Day shift work and overtime as requiredGood oral and written communication skillsBasic computer skillsUnderstanding of power plant printsValid driver's license and access to an insured vehicleAbility to work in a power plant environment that includes climbing and walking long distancesAbility to lift a minimum of 50 poundsConstellation is proud to be an equal opportunity employer and employees or applicants will receive consideration for employment without regard to: age, color, disability, gender, national origin, race, religion, sexual orientation, gender identity, protected veteran status, or any other classification protected by federal, state, or local law.VEVRAA Federal Contractor

Job DescriptionUnleash your potential with the Johnson Controls team!As a global leader in smart, healthy, and sustainable buildings, our mission is to reimagine the performance of buildings to serve people, places, and the planet.Join our winning team and pave the way for a bright future.With our extensive reach across various industries worldwide, our teams are uniquely positioned to support and empower you. You will have the opportunity to develop yourself through meaningful work projects and learning opportunities. We strive to provide our employees with experience, focused on supporting their physical, financial, and emotional wellbeing.Join the Johnson Controls family and thrive in a culture that values your voice and ideas.Your next incredible opportunity is just a few clicks away!Here's what we have to offer:Competitive pay, based upon the UA Local 211 rates.Comprehensive benefits package provided by the UA Local 211.Extensive product and on-the-job/cross-training opportunities, supported by our outstanding internal resources.Encouraging and collaborative team environment.Dedication to safety through our Zero Harm policy.Company vehicle, tools, and equipment provided to complete all jobs.Scheduling and management support.JCI Employee discount programs (The Loop by Perk Spot).What you will doThis is an embedded technician position – in Deer Park area.We are looking for a skilled journeyman chiller mechanic who has experience with industrial processed equipment.We provide factory certification through our Service Technical Academy (STA) with recognition, monetary rewards, and advancement. We offer incentive programs and a #1 focus on employee safety. We also provide tools, cell phones, uniforms, and a company vehicle to perform your job and service our customers to the highest standard.What we look forRequiredMust be a member of or willing to join the local United Pipefitters Association (UA Local 211).Journeyman status required.Minimum of 5 years of practical working experience with strong HVAC/ mechanical troubleshooting experience.You may be required to pass a knowledge examination to assess proficiencies.Attention to detail through interpersonal, digital, and written skills.Self-starter with a passion/ desire to learn and apply on the job.Prioritize safety in all forms.Universal EPA refrigerants license, applicable state or local licensing, and valid driver's license.Must be willing to participate in on-call rotation schedule.TWIC card – or be able to obtain one.ISTC basic – or be able to obtain one.

KEEPING PIPES FLOWINGThe Air Force must maintain thousands of miles of fuel and water lines essential to our daily operations. It’s the job of Water and Fuel Systems Maintenance specialists to manage the plumbing, wastewater collection systems, liquid fuel storage and natural gas distribution systems on every base. These professionals are highly trained in a wide variety of areas, including the principles of operation and construction and fire suppression systems in order to keep our bases running smoothly while upholding the highest environmental standards.REQUIREMENTSYou must meet several requirements before joining the Air Force. These concern your background, overall health and other standards set by the Air Force, Department of Defense and federal law.Minimum EducationYou must be 17–42 years of age, a U.S. citizen and obtain a qualifying ASVAB score. *High School Students may start their application as early as the end of their junior year. Applicants who are non-graduates or non-alternate credential holders must obtain an AFQT Test score of 65 or higher on the ASVAB. ASVAB Score Requirements47 Mechanical (M) and 28 Electronics (E)QualificationsPossession of a valid driver’s license to operate government motor vehiclesFreedom from fear of confined spaces Freedom from fear of heightsNormal color visionCompletion of 7.5 weeks of Basic Military TrainingMust be at least 17, but has not reached age 42 on the date of enlistment

We are seeking a skilled HVAC Technician to join our facilities maintenance team. In this role, you will be responsible for the installation, maintenance, and repair of heating, ventilation, air conditioning, and refrigeration systems. The ideal candidate will have a strong technical background, excellent problem-solving skills, and the ability to work independently.Responsibilities:Inspect, repair, and install HVAC equipment including compressors, condensers, chillers, and cooling towersConduct preventive maintenance inspections and make necessary adjustmentsReplace defective parts in units and their controlsInstall, rebuild, or repair fans, motors, thermostats, and other componentsOperate hand and power tools, welding equipment, and test instrumentsPerform skilled electrical maintenance work on HVAC components and wiring systemsCalibrate systems and perform preventive maintenanceAdhere to health and safety regulationsMaintain equipment in safe working conditionFollow applicable building codes and regulationsMaintain records of time, labor, and materials usedPrepare reports as requiredQualifications:Minimum requirements:2+ years of documentable HVAC journeyman level experience, including HVAC and refrigeration system theory and practicesFamiliarity with applicable building codes and regulationsPreferred requirements:Ability to read and follow technical instructionsStrong problem-solving and diagnostic skillsPost-secondary education in HVAC technologyExperience with building automation systemsKnowledge of energy efficiency practices in HVAC systemsCertification in refrigerant handlingExperience with commercial and industrial HVAC systems#HVACjobs

POSITION OVERVIEW: Guitar Center embodies the world of creativity and music by encouraging staff to find their own individual sound. Our mission is to develop and nurture lifelong musicians and make a difference in the world by enabling musicians and non-musicians alike to experience the joy that comes from creating music. We believe in creating inclusive environments that put our customers first all the while fulfilling our mission.As our Repair Tech (Guitar), you will provide perform maintenance and repair services on customer-owned instruments and to assist in maintenance of specific store inventory, continually building and increasing the business through great customer experience and quality work.A few special characteristics that make our Repair Technicians successful:Customer Focus: Understands customer service principles, and able to provide an excellent customer experience. Able to connect with customers in a meaningful way. Is approachable, genuine, knowledgeable, encouraging, passionate, and committed to helping customers. Able to step in to handle customer service issues.Initiative: Able to identify opportunities & issues and follow through on work activities to capitalize or resolve them. Able to learn quickly and take positive action without being requested to do so. Able to develop knowledge and skills including product, store operations, sales and leadership.Selling: Able to work through GC certification program to gain a base understanding of products and sales techniques.Training: Able to effectively train learners and communicate info and techniques so that they are retained.As our Repair Technician, you will:Interact with customers, ensuring a positive customer experienceService customer-owned instruments with a high level of craftsmanshipMaintain store owned gear, as requestedComplete warranty repair workAdditional duties as assignedWhy Guitar Center Here's just some of the rewards:For our employees who are musicians we offer the unique opportunity of gig leave--take time off to share your music with the world and return to your job after your tour! Guitar Center offers robust benefits and perks, including Medical, Dental, Vision, 401K plus company match, mental health support, paid sick/holiday/vacation time, employee discount program, and tuition reimbursement options.Requirements: Skilled understanding of repairing Guitars Preferences:Foundational product knowledge on Guitar Center products Guitar Center is an Equal Opportunity Employer and provides fair and equal employment opportunity to all employees and applicants regardless of race, color, religion, gender, sexual orientation, gender identity, national origin, age, disability, veteran status or any other protected status prohibited under Federal, State, or local laws. All employment decisions are based on valid job-related requirements.If you are a qualified individual with a disability or a disabled veteran and are unable or limited in your ability to use or access our website, you may request a reasonable accommodation to express interest in a specific opening. You can request reasonable accommodation by calling 1-ext. 2862 or by sending an email to .

Flowserve is a world-leading manufacturer and aftermarket service provider of comprehensive flow control systems. Join a company whose people are committed to building a more sustainable future to make the world better for everyone. With 16,000+ employees in 50+ countries, we combine our global reach with local presence. Our team challenges themselves to approach each situation with ingenuity and creativity to help provide our customers with the most innovative flow control products and services. We support 10,000+ customers worldwide, creating products to meet the needs of our customers who are supplying energy, fresh water, pharmaceuticals and other essentials to consumers, businesses and governments globally. We invite you to put your talents and career in motion at Flowserve. Company Overview: If a culture of excellence, innovation and ownership is what you’re searching for, consider putting your experience in motion at Flowserve. As an individual contributor, or as a leader of people, your enterprise mindset will ensure Flowserve’s position as the global standard in comprehensive flow control solutions. Here, your opportunity for professional development and industry leading rewards will be supported by our foundational commitments to the values of people first, integrity and safety. Thinking beyond opportunity and reward, at Flowserve, we are inspired by working together to create extraordinary flow control solutions to make the world better for everyone! Role Summary: The Customer Product Repair Mechanic is responsible for all processes related to disassembly, repair, and assembly of a range of equipment/products including but not limited to rotating equipment, of high energy electric actuators, pumps, small compressors, and decoking equipment. The CPRM will work with team leads to execute work as provided on work instructions, routers, drawings, and checklists. The CPRM independently selects and uses inspection equipment to check dimensions of all critical components during the assembly and repair process and gives a written description of the wear and condition of critical components. This position also ensures all forms and documentation are complete prior to submission of quotation. The CPRM will also be responsible to paint, install all tagging, and prep the equipment prior to shipment to the customer. This is a Night shift- Overtime required Responsibilities & Requirements : Follow pre-job brief, Return Goods Policies, and checklists prior to DCI and assembly.Ability to independently, inspect, repair, and assemble, components and equipment, and accurately complete all required documentation.Take pictures of the DCI process as instructed on the DCI checklist; properly clean each component for reuse and write the condition of components on all DCI documentation.Interface with service coordinator, production planners, and customer to discuss the condition of all critical components when applicable.Follow all routers and assembly procedures.Inspect all components for critical fits and run-outs and document each number on the appropriate assembly form.Take pictures of the assembly process as instructed on the assembly check list.Significant experience with the proper and safe use of various common power and hand tools needed for assembly.Utilize torches (and other heat sources) and liquid nitrogen properly and safely in the assembly process.Run balance machine to proper balance rotating components and assemblies.Conduct low pressure air tests and high-pressure hydrostatic tests.Inspect and verify quality of finished and in-process work with precision measurement tools (i. e. micrometers, dial indicators, calipers, etc.).Accurately set up and read precision measuring instruments such as micrometers, dial indicators, calipers, and other gauges.Ability to work efficiently within fixed time windows for each manufacturing process.Communicate clearly to peers and supervisors any related job issues.Coordinate and interface with sales, operations, engineers, and customers as necessary.Paint when required, tag, and prep equipment prior to shipment to the customer.Utilize cranes, lifting devices, and fork trucks.Willing to provide input on work process improvement and on developing new tools and hardware as part of on-going Continuous Improvement projects.Work safely while helping colleagues work safely and utilizing Stop Work Authority when appropriate.Ability to understand work instructions, safety procedures, and company policies.Comply with all Flowserve policies and procedures.Must own set of personal SAE hand tools and measurement instruments (micrometers, dial indicators, calipers, etc.) and a roll-around toolbox.Able to read and interpret prints, shop drawings, assembly checklists, and other written work instructions.Basic computer skills including understanding of Microsoft Office PackageAbility to prioritize and manage multiple tasks in a fast-paced and changing work environment.Attention to detail and process-oriented mindset with results driven background.Electrical wiring experience or mechanical assembly experience.Must be able to stand for long periods of time and lift up to 25 pounds with a full range of hand and upper-body motion to work with tools and parts.Must be able to work overtime, weekends, and holidays as the business dictates.Other duties as assigned.1st or 2nd shift available Preferred Experience / Skills: Multistage pump assembly experience, API BB3/BB5".Excellent communication skills both written and verbal.Excellent organizational skills, able to problem solve, and prioritize work assignments.Prior experience working the fast-paced and unpredictable environment around repair services.Demonstrate a desire for personal growth and career development.High School Diploma / GEDPrevious experience assembling API pumps Flowserve offers competitive pay, annual bonuses, medical benefits on day 1, generous paid vacation time, paid holidays, 401(k) and many other excellent benefits Req ID : R-11930 Job Family Group : Operations Job Family : OP Repair Mechanic EOE including Disability/Protected Veterans. Flowserve will also not discriminate against an applicant or employee for inquiring about, discussing or disclosing their pay or, in certain circumstances, the pay of their co-workers. Pay Transparency Nondiscrimination Provision If you are a qualified individual with a disability or a disabled veteran, you have the right to request a reasonable accommodation if you are unable or limited in your ability to use or access flowservecareers. com as result of your disability. You can request a reasonable accommodation by sending an email to employment@flowserve. com. In order to quickly respond to your request, please use the words "Accommodation Request" as your subject line of your email. For more information, read the Accessibility Process.

Hiring a 1099 Independent Contractor Immediately! Flexible work environment. Set your own hours, work with minimal guidance, be your own boss! OPENLANE is searching for an Independent Contractor for vehicle inspections. The Independent Contractor will provide vehicle inspection services at car dealerships. The Independent Contractor must have a minimum of 5 years of automotive experience as a vehicle mechanic or equivalent mechanical background. Required: A working iPhone with a data plan,(We do not currently support Android devices to perform inspections) a basic OBD II scanner, reliable transportation, and valid driver's license. Some of the perks include: Make good money in an exciting fieldBe your own boss and set your own hoursFlexible work environmentAbility to work with minimal guidance and supervision

SPECIALIZED AIRCRAFT IS OUR SPECIALTYThe Air Force employs hundreds of tactical aircraft to complete our missions, including fighters, strike-fighters and attack planes. It’s the responsibility of Tactical Aircraft Maintenance specialists to ensure that every component of these high-performance aircraft is maintained to the most exacting standards. These experts ensure that the aircraft in their care are ready to fly at a moment’s notice so that pilots can safely and effectively complete their mission.REQUIREMENTSYou must meet several requirements before joining the Air Force. These concern your background, overall health and other standards set by the Air Force, Department of Defense and federal law.Minimum EducationYou must be 17–42 years of age, a U.S. citizen and obtain a qualifying ASVAB score. *High School Students may start their application as early as the end of their junior year. Applicants who are non-graduates or non-alternate credential holders must obtain an AFQT Test score of 65 or higher on the ASVAB. ASVAB Score Requirements47 Mechanical (M)QualificationsKnowledge of principles applying to aircraft systemsNormal color visionCompletion of a current National Agency Check, Local Agency Checks and CreditCompletion of 7.5 weeks of Basic Military TrainingMust be at least 17, but has not reached age 42 on the date of enlistment

COMPANY OVERVIEWAs the nation's largest producer of clean, carbon-free energy, Constellation is a company purposely-built to meet the challenges of the climate crisis. Constellation has been the leader in clean energy production for more than a decade and we are growing our company and capabilities. Now, we're accelerating, speeding our low-carbon or no-carbon power to more people in more places, day and night, providing our customers and communities with options to buy, manage and use energy as part of their decarbonization mission. The race is on to confront the climate crisis and Constellation is ready to meet the challenge. Come join us as we lead energy, together.TOTAL REWARDSConstellation offers a wide range of benefits and rewards, designed to help our employees thrive professionally and personally. In addition to highly competitive salaries, we offer a bonus program, 401(k) with company match, employee stock purchase program comprehensive medical, dental and vision benefits, including a robust wellness program paid time off for vacation, holidays and sick days and much more.This role will be considered for the O&M Tech level II and III. Leveling will be based on candidates past work experience. Power Plant Electrician - Operations and Maintenance TechnicianPRIMARY PURPOSE OF POSITIONThe primary responsibilities of this role will be to operate, troubleshoot, repair and maintain all mechanical,I/C, and electrical high voltage equipment with as required to support plant operations and maximize asset value.Hourly Rate Starts at $34.19 - $55.30, depending on level of experiencePRIMARY DUTIES AND ACCOUNTABILITIESUses computerized maintenance management system to maintain and control work order system spare parts inventory. Perform maintenance and repair work on plant equipment such as pumps, gearboxes, fans, turbines, bearings, boilers, pipe systems, valves and limitorque operators. (disassembly, part repair or replacement, assembly).Operates monitors and maintains turbines, generators, pumps, scrubber plants, industrial wastewater treatment plants, boilers, motors, combustion turbines and associated auxiliary equipment.Trains and develops other employees in performing preventive maintenance and routine equipment service activities. Practices situational leadership, environmental and safety stewardship.Leads equipment or system problem identification and recommends solutions.Perform predictive/preventive maintenance.Perform electrical maintenance on generators, transformers and MOV&rsquos.Perform troubleshooting on plant equipment such as power and control circuits, heaters, motors and transformers using electrical test instruments.Develops operating procedures for plant equipment to ensure consistent and safe operation.Performs all work during an assigned shift in a safe, continuous and efficient manner while maintaining environmental and housekeeping standards within federal, state and local guidelines. Performs work per Work Management processes and ensures safety using equipment Tag out process.Assists in requisitioning parts and supplies.Perform any other duties as assigned.POSITION SCOPEThe incumbent in this position must be able to communicate across all levels of the organization. Good knowledge of PLC's, Ovation and GE Mark 6 Digital Controls Systems.Qualifications - ExternalMINIMUM QUALIFICATIONSAssociates' Degree in Power Plant Technology, Engineering Technology, or Electronics ORHS Diploma with minimum of 18 months of trade or technical training in Power Plant TechnologySuccessfully complete the training requirements and time in job requirements for the position including previously passing the EEI TECH testElectrical backgroundAvailability for Day shift work and overtime as requiredGood oral and written communication skillsBasic computer skillsUnderstanding of power plant printsValid driver's license and access to an insured vehicleAbility to work in a power plant environment that includes climbing and walking long distancesAbility to lift a minimum of 50 pounds

POSITION OVERVIEW: Guitar Center embodies the world of creativity and music by encouraging staff to find their own individual sound. Our mission is to develop and nurture lifelong musicians and make a difference in the world by enabling musicians and non-musicians alike to experience the joy that comes from creating music. We believe in creating inclusive environments that put our customers first all the while fulfilling our mission.As our Repair Tech (Guitar), you will provide perform maintenance and repair services on customer-owned instruments and to assist in maintenance of specific store inventory, continually building and increasing the business through great customer experience and quality work.A few special characteristics that make our Repair Technicians successful:Customer Focus: Understands customer service principles, and able to provide an excellent customer experience. Able to connect with customers in a meaningful way. Is approachable, genuine, knowledgeable, encouraging, passionate, and committed to helping customers. Able to step in to handle customer service issues.Initiative: Able to identify opportunities & issues and follow through on work activities to capitalize or resolve them. Able to learn quickly and take positive action without being requested to do so. Able to develop knowledge and skills including product, store operations, sales and leadership.Selling: Able to work through GC certification program to gain a base understanding of products and sales techniques.Training: Able to effectively train learners and communicate info and techniques so that they are retained.As our Repair Technician, you will:Interact with customers, ensuring a positive customer experienceService customer-owned instruments with a high level of craftsmanshipMaintain store owned gear, as requestedComplete warranty repair workAdditional duties as assignedWhy Guitar Center Here's just some of the rewards:For our employees who are musicians we offer the unique opportunity of gig leave--take time off to share your music with the world and return to your job after your tour! Guitar Center offers robust benefits and perks, including Medical, Dental, Vision, 401K plus company match, mental health support, paid sick/holiday/vacation time, employee discount program, and tuition reimbursement options.Requirements: Skilled understanding of repairing Guitars Preferences:Foundational product knowledge on Guitar Center products Guitar Center is an Equal Opportunity Employer and provides fair and equal employment opportunity to all employees and applicants regardless of race, color, religion, gender, sexual orientation, gender identity, national origin, age, disability, veteran status or any other protected status prohibited under Federal, State, or local laws. All employment decisions are based on valid job-related requirements.If you are a qualified individual with a disability or a disabled veteran and are unable or limited in your ability to use or access our website, you may request a reasonable accommodation to express interest in a specific opening. You can request reasonable accommodation by calling 1-ext. 2862 or by sending an email to .

Flowserve is a world-leading manufacturer and aftermarket service provider of comprehensive flow control systems. Join a company whose people are committed to building a more sustainable future to make the world better for everyone. With 16,000+ employees in 50+ countries, we combine our global reach with local presence. Our team challenges themselves to approach each situation with ingenuity and creativity to help provide our customers with the most innovative flow control products and services. We support 10,000+ customers worldwide, creating products to meet the needs of our customers who are supplying energy, fresh water, pharmaceuticals and other essentials to consumers, businesses and governments globally. We invite you to put your talents and career in motion at Flowserve. Company Overview: If a culture of excellence, innovation and ownership is what you’re searching for, consider putting your experience in motion at Flowserve. As an individual contributor, or as a leader of people, your enterprise mindset will ensure Flowserve’s position as the global standard in comprehensive flow control solutions. Here, your opportunity for professional development and industry leading rewards will be supported by our foundational commitments to the values of people first, integrity and safety. Thinking beyond opportunity and reward, at Flowserve, we are inspired by working together to create extraordinary flow control solutions to make the world better for everyone! Customer Product Repair Mechanic-First shift position, Overtime required Role Summary: The Customer Product Repair Mechanic is responsible for all processes related to disassembly, repair, and assembly of a range of equipment/products including but not limited to rotating equipment, of high energy electric actuators, pumps, small compressors, and decoking equipment. The CPRM will work with team leads to execute work as provided on work instructions, routers, drawings, and checklists. The CPRM independently selects and uses inspection equipment to check dimensions of all critical components during the assembly and repair process and gives a written description of the wear and condition of critical components. This position also ensures all forms and documentation are complete prior to submission of quotation. The CPRM will also be responsible to paint, install all tagging, and prep the equipment prior to shipment to the customer. Responsibilities include: Follow pre-job brief, Return Goods Policies, and checklists prior to DCI and assembly.Work on API PumpsAbility to independently, inspect, repair, and assemble, components and equipment, and accurately complete all required documentation.Take pictures of the DCI process as instructed on the DCI checklist; properly clean each component for reuse and write the condition of components on all DCI documentation.Interface with service coordinator, production planners, and customer to discuss the condition of all critical components when applicable.Follow all routers and assembly procedures.Inspect all components for critical fits and run-outs and document each number on the appropriate assembly form.Take pictures of the assembly process as instructed on the assembly check list.Significant experience with the proper and safe use of various common power and hand tools needed for assembly.Utilize torches (and other heat sources) and liquid nitrogen properly and safely in the assembly process.Run balance machine to proper balance rotating components and assemblies.Conduct low pressure air tests and high-pressure hydrostatic tests.Inspect and verify quality of finished and in-process work with precision measurement tools (i. e. micrometers, dial indicators, calipers, etc.).Accurately set up and read precision measuring instruments such as micrometers, dial indicators, calipers, and other gauges.Ability to work efficiently within fixed time windows for each manufacturing process.Communicate clearly to peers and supervisors any related job issues.Coordinate and interface with sales, operations, engineers, and customers as necessary.Paint when required, tag, and prep equipment prior to shipment to the customer.Utilize cranes, lifting devices, and fork trucks.Willing to provide input on work process improvement and on developing new tools and hardware as part of on-going Continuous Improvement projects.Work safely while helping colleagues work safely and utilizing Stop Work Authority when appropriate Requirements: 5 plus years relevant experienceAble to read and interpret prints, shop drawings, assembly checklists, and other written work instructions.Must be able to stand for long periods of time and lift up to 25 pounds with a full range of hand and upper-body motion to work with tools and partsMust be able to work overtime, weekends, and holidays as the business dictates.Must own set of personal SAE hand tools and measurement instruments (micrometers, dial indicators, calipers, etc.) and a roll-around toolbox.Comply with all Flowserve policies and procedures. Preferred Experience / Skills: Ability to understand work instructions, safety procedures, and company policies.Electrical wiring experience or mechanical assembly experienceExcellent communication skills both written and verbal.Excellent organizational skills, able to problem solve, and prioritize work assignments.Prior experience working the fast-paced and unpredictable environment around repair services.Demonstrate a desire for personal growth and career development.HS Diploma / GED Flowserve offers competitive pay, annual bonuses, medical benefits on day 1, generous paid vacation time, paid holidays, 401(k) and many other excellent benefits! Req ID : R-11929 Job Family Group : Operations Job Family : OP Repair Mechanic EOE including Disability/Protected Veterans. Flowserve will also not discriminate against an applicant or employee for inquiring about, discussing or disclosing their pay or, in certain circumstances, the pay of their co-workers. Pay Transparency Nondiscrimination Provision If you are a qualified individual with a disability or a disabled veteran, you have the right to request a reasonable accommodation if you are unable or limited in your ability to use or access flowservecareers. com as result of your disability. You can request a reasonable accommodation by sending an email to employment@flowserve. com. In order to quickly respond to your request, please use the words "Accommodation Request" as your subject line of your email. For more information, read the Accessibility Process.

MAINTAINING AIRCRAFT INTEGRITYWhen an aircraft suffers damage, it’s essential to fix it and get back in the air. Responsible for repairing physical damage, Aircraft Structural Maintenance specialists maintain the high quality structures of Air Force aircraft. Utilizing various methods, these professionals do everything from installing replacement parts to building a replacement from scratch in order to restore the structural integrity of the aircraft and ensure the safety of the Airmen who fly them.REQUIREMENTSYou must meet several requirements before joining the Air Force. These concern your background, overall health and other standards set by the Air Force, Department of Defense and federal law.Minimum EducationYou must be 17–42 years of age, a U.S. citizen and obtain a qualifying ASVAB score. *High School Students may start their application as early as the end of their junior year. Applicants who are non-graduates or non-alternate credential holders must obtain an AFQT Test score of 65 or higher on the ASVAB. ASVAB Score Requirements47 Mechanical (M)QualificationsKnowledge of aircraft construction featuresCompletion of 7.5 weeks of Basic Military TrainingMust be at least 17, but has not reached age 42 on the date of enlistment

Flowserve is a world-leading manufacturer and aftermarket service provider of comprehensive flow control systems. Join a company whose people are committed to building a more sustainable future to make the world better for everyone. With 16,000+ employees in 50+ countries, we combine our global reach with local presence. Our team challenges themselves to approach each situation with ingenuity and creativity to help provide our customers with the most innovative flow control products and services. We support 10,000+ customers worldwide, creating products to meet the needs of our customers who are supplying energy, fresh water, pharmaceuticals and other essentials to consumers, businesses and governments globally. We invite you to put your talents and career in motion at Flowserve. Company Overview: If a culture of excellence, innovation and ownership is what you’re searching for, consider putting your experience in motion at Flowserve. As an individual contributor, or as a leader of people, your enterprise mindset will ensure Flowserve’s position as the global standard in comprehensive flow control solutions. Here, your opportunity for professional development and industry leading rewards will be supported by our foundational commitments to the values of people first, integrity and safety. Thinking beyond opportunity and reward, at Flowserve, we are inspired by working together to create extraordinary flow control solutions to make the world better for everyone! Role Summary: This position welds parts and components for equipment, products, and installations by means of MIG, MAG, TIG, electrode welds or any other welding application. As part of a customer-focused team, you will be working with tight deadlines, challenging mechanical problems, and discussing the work with the manager before, during, and after work completion. Choice of shift hours: 2:30 PM - 11 PM or 10 PM - 6 AM. Requirements: Welder Certificate3 - 5 years experience as a welder.MIG, TIG and stick welding.Fit and fabricate supports, piping, etc.Can work independently, flexibly, and accurately.Good team spirit and initiative. Responsibilities: Select the appropriate welding method, such as TIG, MIG, MAG or stick.Plan and lay out work from blueprints and manufacturers’ specification sheets, using shop math and measuring instruments.Setting up and operating a conventional lathe for the preparation of welded parts.Proper Identification of materials and component preparation.Assembly activities during production.Welding repairs on raw and finished parts.Welding installations based on technical drawings.Verify the quality of finished work, demonstrating an in-depth understanding of specifications and workmanshipMeet production goals relating to efficiency, schedules, and scrap.Troubleshoot and correct process and equipment problems.Collaborate with machinists and assemblers on the team to discuss and solve problems relating to repairs and equipment.Accurately record data on computer systems or manual logs.Maintain a safe workplace, following safety procedures and wearing protective equipment.Clean, maintain machines, tools, and keep workspace organized.Perform heat treatment operations and have welding experience.Define, evaluate, and discuss quality workmanship related to welding.Demonstrate customer-service mindset for on-time delivery and quality work.Capable of standing for long periods, performing repetitive arm motions, and lifting up to 50 pounds.Proven reliable attendance, willing to work overtime and weekends as needed.Hold welder certificate and be prepared to perform other duties as assigned. Preferred Experience / Skills: Welding experience in mechanical manufacturing or valve industry.PT and MT related certificates are preferred.Post weld heat treatment experience.Good technical understanding.SAP knowledge.HS Diploma / GED and 3-5 years relevant experience Flowserve offers competitive pay, annual bonuses, medical benefits on day 1, generous paid vacation time, paid holidays, 401(k) and many other excellent benefits! Req ID : R-12193 Job Family Group : Operations Job Family : OP Welding EOE including Disability/Protected Veterans. Flowserve will also not discriminate against an applicant or employee for inquiring about, discussing or disclosing their pay or, in certain circumstances, the pay of their co-workers. Pay Transparency Nondiscrimination Provision If you are a qualified individual with a disability or a disabled veteran, you have the right to request a reasonable accommodation if you are unable or limited in your ability to use or access flowservecareers. com as result of your disability. You can request a reasonable accommodation by sending an email to employment@flowserve. com. In order to quickly respond to your request, please use the words "Accommodation Request" as your subject line of your email. For more information, read the Accessibility Process.