Pay starts at $18.00 an hour and goes up depending on experience.
Our ideal candidate should have previous experience as a mechanic/technician in the trailer industry. Carpentry, welding and mechanic skills are a plus. We are looking for a self-motivated person with strong work ethics. We are willing to train the right applicant.
Duties will include: Read and understand the jobs and work order per company standards Preventative maintenance and repair all systems on Semi-Trailers to meet the standards set forth by DOT Remove and replace brakes, brake drums, hubs, seals, bearings, races and associated parts Repair electrical and lighting systems Repair or replace chassis components such as springs, spring hangers, equalizers, complete slider assemblies, axles, and sub frames Repair mud flap brackets and dolly leg assembles Repair or replace flooring, rub rails, doors and door trim Repair roofs, panels, nose panels, lower and upper rails Conform to all safety and health standards Assist fellow mechanic technicians
Benefits: Paid time off Paid holidays 401 Medical, Dental, Vision Life Insurance Long and Short Term Disability
Requirements: 1 - 3 years of experience in trailer repair or equivalent experience with welding, carpentry, and mechanic skills Valid driver’s license with a safe driving record. Must furnish own basic hand tools. Ability to stand, walk, bend, crouch, stoop, reach, stretch, step, climb, and / or sit frequently and lift heavy (up to 60lb) throughout the duration of the day Ability to work independently with minimal supervision Attention to detail and highly organized

Maintains equipment operation by completing inspections and preventive maintenance requirements; correcting vehicle deficiencies; adjusting and alignments; keeping records. Work performed on trucks, trains & heavy equipment.
Job Duties: Determines vehicle condition by conducting inspections and diagnostic tests; identifying worn and damaged parts. Keeps equipment available for use by completing preventive maintenance schedules; installing component and part upgrades; controlling corrosion; completing winterization procedures. Corrects vehicle deficiencies by removing, repairing, adjusting, overhauling, assembling, disassembling, and replacing major assemblies, sub-assemblies, components, parts, or systems, such as, power and drive trains, electrical, air conditioning, fuel, emission, brake, steering, hydraulics; completes machine shop operations; adjusting and alignments including bearing loads, gear tooth contact, valve mechanisms, governors, oil systems, control linkages, clutches, and traction units. Verifies vehicle performance by conducting test drives; adjusting controls and systems. Complies with federal and state vehicle requirements by testing engine, safety, and combustion control standards. Maintains vehicle appearance by cleaning, washing, and painting. Maintains vehicle records by annotating services and repairs. Keeps shop equipment operating by following operating instructions; troubleshooting breakdowns; maintaining supplies; performing preventive maintenance; calling for repairs. Contains costs by using warranty; evaluating service and parts options. Keeps supplies ready by inventorying stock; placing orders; verifying receipt. Updates job knowledge by participating in educational opportunities; reading technical and regulation publications. Enhances maintenance department and organization reputation by accepting ownership for accomplishing new and different requests; exploring opportunities to add value to job accomplishments. Performs some physical work to include climbing, heavy lifting, and carrying Travel may be required to reach a vehicle needing repair.
Benefits: Medical Dental Vision Life Insurance 401K with Match Paid Holidays/Vacation Safety Bonus Program
Qualifications: Pre-employment drug and alcohol screening. Background screening including previous employment, education, criminal history and driving record verification. Valid Texas driver license Caterpillar experience a plus. Experience with Backhoes, Excavators, Dozers, Forklift, & Off Road Trucks.

Responsibilities: Forklift Drivers at Pol-Tex are responsible for safe operation of sit-down propane forklifts for the purpose of handling, loading, and unloading product. Drivers at Pol-Tex regularly use RF scanners and inventory control systems to pull orders, keep production lines supplied, and re-stock inventory racks. The role may involve additional responsibilities and opportunities as they become necessary and/or are assigned by management.
Find that perfect career match and enjoy a refreshing change at Pol-Tex, a division of Poly-America, L.P. Our Baytown area location is expanding and provides a great opportunity to work for an industry leader with a history of steady and stable growth.
Pol-Tex offers competitive compensation packages including Medical/Dental, paid vacations, paid holidays and 401(K).
If you are looking for a dynamic career opportunity that offers growth and stability then this could be the position for you.
Qualifications: One year of recent experience operating forklifts. The ability and desire to work safely. The ability to work a night shift or a day shift. 4 day on/4 day off rotation as assigned by management. Additional responsibilities and opportunities as they are assigned by management.

Find that perfect career match and enjoy a refreshing change at Pol-Tex, a division of Poly-America, L.P. Our Baytown area location is expanding and provides a great opportunity to work for an industry leader with a history of steady and stable growth.

If you are looking for a dynamic career opportunity that offers growth and stability then this could be the position for you.
Pol-Tex offers competitive compensation packages including: Medical Dental Paid vacations Paid holidays 401(K)
Qualifications: The ideal candidate will possess: Some experience performing troubleshooting functions in a manufacturing environment. The desire to expand knowledge and grow with the company. The ability and desire to work safely. The ability to work a night shift or a day shift.  4 day on/4 day off rotation as assigned by management. Additional responsibilities and opportunities as they are assigned by management.

Pol-Tex International, a division of Poly-America, L.P., is currently seeking an Industrial Mechanic to join our maintenance team. Pol-Tex International’s mission is to be the safest and most efficient choice in the polyethylene recovery, recycling, and compounding industries.  Our fleet, facility, and equipment combined with our experienced and dedicated professional staff make Pol-Tex International the premier gathering and recycling center for the Gulf Coast Region. Pol-Tex International offers competitive compensation packages including Medical/Dental, paid vacations and holidays, and 401(K). Responsibilities Industrial Mechanics at Pol-Tex International are responsible for the maintenance, installation, troubleshooting, and modification of new and existing industrial converting equipment. This role will document, recommend, and execute maintenance procedures. The Mechanic will be working in a manufacturing maintenance team. At times they will complete the mechanical testing of electro-mechanical equipment. Tasks include replacing, inspecting and dismantling defective parts, and implementing upgrades and part changeovers. The role may involve additional responsibilities and opportunities as they become necessary and/or are assigned by management.
The ideal candidate will possess: Some experience performing troubleshooting functions in a manufacturing environment. A strong desire to be hands on with their work and to follow processes through. The aptitude and desire necessary to be a good student of Pol-Tex processes, equipment, and procedures. Problem solving skills including troubleshooting of mechanical equipment.

Encuentra la Carrera perfecta y disfruta un refrescante cambio en Pol-Tex, division de Poly-America, L.P. Nuestra localidad en el area de Baytown se esta expandiendo y provee una gran oportunidad para trabajar en una industria lider en estabilidad y crecimiento.
Los empleados de produccion en Pol-Tex son responsables por la operacion segura de montacargas de gas para el proposito de manejo de cargar y descargar producto. El puesto de trabajo puede implicar responsabilidades adicionales a medida que se necesiten y/o sean asignadas por el gerente.
Responsabilidades: Operadores de montacargas en Pol-Tex son responsables por la operacion segura de montacargas sentado de gas para el proposito de manejo carga y descarga de producto. Los operadores de montacargas en Pol-Tex regularmente usan escaners RF y sistemas de control de inventario para  sacar ordenes , mantener las lineas de produccion suministradas y re llenar los bastidores de almacenamiento. La posicion puede incluir responsabilidades y oportunidades adicionales segun sean necesarias y/o asignadas por el gerente.
Calificaciones: Seis meses a un ano de experiencia reciente operando montacargas La habilidad y el deseo de trabajar de una manera segura La disponibilidad de trabajar un turno de dia o de noche. 4 dias de trabajo/ 4 dias de descanso, dias rotativos segun sean assignados. Responsabilidades adicionales y oportunidades segun sean asignadas por el gerente.

W.M. Dewey & Son, Inc. is a family-owned business that has been providing services to the oil and gas industry since 1895. We specialize in being a full-service provider of pipe transportation, pipe storage and pipe logistics services. W.M. Dewey has an immediate opening for dependable safety oriented Facilities Maintenance Helper. Who is willing to grow in knowledge and increase their responsibilities in the workplace.
Job Duties: Landscaping duties around yard (operation of lawn equipment) Perform general maintenance around the yard, shop, and office (general electrical and plumbing) Maintain shop floors for cleanliness in and around machines, tools, and equipment Operate a forklift (Training Provided) Assist Diesel Mechanics in the shop as needed (Working on tires, Large Trucks, Forklifts, Small Lawn Equipment, etc.) Order and keep inventory of all parts (some driving required) Use Company vehicle to deliver paperwork and parts between vendors and yards 50/50 Inside and Outside work
Benefits: 401(k) Dental insurance Health insurance Life insurance Paid time off Vision insurance
Qualifications: Maintenance experience 1 year preferred Must Have A Valid Texas Drivers License Must have a Clean Driving Record Pass a background Check Must be at least 21 years of age Must be able to lift up to 40 pounds and stand for long periods of time Must have basic Plumbing and Electrical Knowledge Must be able to operate Power tools (chainsaw, power drill, skill saw) Must have reliable transportation to and from work Bilingual (Spanish and English) is a plus but not required Weekends as needed

The Alabama-Coushatta Indian Tribal Council Employment & Training Program is a Tribal Program that was formed in 1973. The program was designed by the Department of Labor’s Division of Indian and Native American Programs (DINAP) and is managed by the Alabama-Coushatta Tribe of Texas.
Our program provides employment and training services to Native Americans/American Indians, Native Hawaiians, and Native Alaskans that reside within the 121 county service area of the State of Texas.
It is the mission of the Alabama-Coushatta Indian Tribal Council Employment & Training Program to provide quality educational and employment opportunities to our Native American/American Indian, Native Hawaiian, and Native Alaskan clients in our service delivery area by reaching out into communities and joining forces with business leaders, workforce boards, service providers, and educational institutions to ensure participants are well prepared to meet the opportunities of employment such that they may take advantage of progressive career opportunities.
You must be a member of a U.S. Federally recognized tribe with a supporting document from a federally recognized Tribe's Tribal Rolls and Records Office
Workforce Innovation and Opportunity Act Section 166, 20 CFR 684.300 (a) (1) An Indian, as determined by a policy of the INA program grantee; (2) Alaska Native; or (3) Native Hawaiian.
Our Services: EMPLOYMENT CAREER SERVICES - A wide range of services to assist Native Americans as they seek job placement or advancement in their career.
TRAINING SERVICES - Provide job readiness training as a means of better preparing Native Americans for the workforce.
EDUCATION SERVICES - A wide range of services to assist Native Americans as they seek job placement or advancement in their career.

T.G Meat Center is seeking to hire multiple meat cutters. This job requires a person to work in a cold refrigerated warehouse space. These are full-time positions, and we are looking to hire meat cutters with at least 1-2 years experience. Candidates that have experience cutting meat with commercial electric bandsaw are preferred. Work hours are 7am to 4pm, with occasional Saturdays and Overtime. All applicants will be contacted.
Benefits: Full Medical Dental Vision 401K Vacation Time Sick Time Holiday Pay Short-Term/Long-Term Disability
Qualifications: MUST be 18 years or older Able to utilize knives, saws, grinders and other equipment to perform meat cutting and trimming. Demonstrate the ability to identify different meat cuts. Willing to work individually as well as in a team. Maintain a safe environment- Personal Safety and Food Safety. Positive Attitude—makes everyone’s day better, including yours! Willing to learn and follow our processes. Ability to communicate verbally Be able to lift up to 60lbs Be physically able to load & unload a dolly or pallett Manufacturing experience is helpful, but not necessary.
T.G Meat Center  is a second chance employer. EOE. We celebrate diversity and are committed to creating an inclusive environment for all employees.

The Harris County Flood Control District is seeking exceptional candidates for the position of Inspector with the Construction Division.
Responsible for observing, inspecting, and documenting work-in-progress on construction project sites to ensure the work is being performed in accordance with sealed and approved construction plans, sound construction practices, and all applicable local, state, and federal permitting and approvals. Inspections include site clearing observation, grading, excavation, backfilling, and/or installation of reinforced concrete structures such as box culverts, low flow sections, slope pavement, inlets, manholes, and street sections.
Essential Functions and Duties: Perform daily inspections of construction sites and work completed to ensure projects are constructed in accordance with the sealed and approved construction plans, follow good construction practices and standards, and are applicable to local, state, and federal permitting. Coordinate with contractor representatives on work scheduling, interpretation of plans and specifications, and acceptability of materials and workmanship to ensure compliance with sealed plan requirements. Inspect materials on construction sites to ensure compliance with technical specifications and drawings, and schedule independent material testing and engineering companies to assist with quality assurance. Report all reject materials and deficiencies in construction methods. Document, photograph, and maintain daily reports summarizing construction progress, scheduling, workmanship, and deficiencies of construction materials and methods. Collect and review supporting documentation for payment of work performed, consisting of delivery tickets, invoices, product labels, sketches, calculations, and other related records that identify approved materials and products used to support quantities for payment. Prepare for and communicate substantial completion and final walk-through of projects to address any questions or concerns and finalize completion punch list with assigned contractor. Perform other duties that may be added or changed as the course and scope of the job directs.
Benefits (offered only to employees in regular full-time positions): Medical Coverage Dental Coverage Vision Coverage Wellness Plan Life Insurance Long-term disability Employee Assistance Program Ten (10) days of vacation each year for the first five (5) years of service Accrual rates increase based on years of service Eleven (11) County-observed holidays and one (1) floating holiday Professional development opportunities Dependent Care Reimbursement Plan Healthcare Reimbursement Account 457 Deferred Compensation Plan
The following benefits are also available to regular full-time employment and may be available to part-time employees: Retirement Pension (TCDRS) Flexible schedule (varies by department) Transportation Assistance (Metro RideSponsor Program)
Qualifications: Valid Class "C" Texas Driver License Knowledge of Microsoft Office applications. Good verbal & written communication skills. Ability to prioritize and manage multiple projects and/or assignments. Good organizational skills. Knowledge of construction standards, practices, and techniques. Knowledge of bayou, drainage area, and rights-of-way maintenance.
Preferred Experience and Education: Associate degree or higher in Construction Management or a related field from an accredited college or university. Previous inspection experience in interpreting drainage and flood control construction plans and inspecting construction installations.
This position is subject to a criminal history check. Only relevant convictions will be considered and, even when considered, may not automatically disqualify the candidate. Employment may be contingent on passing a drug screen and meeting other standards.
The Harris County Flood Control District has the mission to reduce the risk of flooding in Harris County, the third most populated county in the United States, with a population in excess of 4.7 million, including the City of Houston, the nation’s fourth largest city. The District has jurisdiction over the county's primary stormwater facilities, consisting of approximately 1,500 channels totaling nearly 2,500 miles in length, as well as more than 60 regional stormwater detention basins, totaling more than 10,000 acres and several wetlands mitigation banks.
Harris County is an Equal Opportunity Employer

Harris County Flood Control District is seeking qualified candidates for the role of Equipment Operator.
Reporting to the Maintenance Construction Field Supervisor, the Equipment Operator is responsible for operating various pieces of small sized construction equipment, small engines, attachments, power tools and hand tools to construct, repair or perform maintenance to channels/bayous within Harris County.
Essential Functions and Duties: Perform manual work in preparing surfaces and mixing concrete for concrete pour. Operate small sized construction equipment, small engines, attachments, power tools and hand tools for channel and bayou maintenance. Maintain, clean, and prepare construction sites to eliminate possible hazards. Assist with the evacuation of other equipment that have become disabled. Remove debris and/or selective vegetation from channel rights of way and de-snag channel bottoms. Clear trees, rocks, and any other large obstacles from the County rights-of-way. Prune limbs for access of equipment. Flag traffic to ingress and egress job sites. Act as a spotter for drivers/operators. Stock and inventory County trucks, trailers and equipment with tools and materials. Wash County vehicles and equipment. Clean shop, fleet parking area, and laydown yard. Assist with constructing forms, placing rebar, pouring, finishing concrete structures, building, or repairing manholes and inlets, and installation of corrugated metal pipe outfalls. Install signs, gates, and bollards. Load and unload equipment and construction materials on/off trailers and rollback trucks. Inspect County equipment and vehicles for safety and compliance before operation. Drive and operate County vehicles and equipment. May perform other duties that can be added or changed as the course and scope of the job directs.
Benefits (offered only to employees in regular full-time positions): Medical Coverage Dental Coverage Vision Coverage Wellness Plan Life Insurance Long-term disability Employee Assistance Program Ten (10) days of vacation each year for the first five (5) years of service Accrual rates increase based on years of service Eleven (11) County-observed holidays and one (1) floating holiday Professional development opportunities Dependent Care Reimbursement Plan Healthcare Reimbursement Account 457 Deferred Compensation Plan
The following benefits are also available to regular full-time employment and may be available to part-time employees: Retirement Pension (TCDRS) Flexible schedule (varies by department) Transportation Assistance (Metro RideSponsor Program)   Qualifications: High school diploma or G.E.D. equivalent One (1) year experience operating small sized equipment. One (1) year experience as a laborer. Valid Class "C" Texas Driver’s License. Must have or obtain a Forklift certification within 90 days of employment.
Knowledge Skills, and Abilities: Good verbal & written communication skills. Can effectively communicate with coworkers and the public. Must be able to read and understand written instructions, maps, and be able to provide directions to District locations. Ability to work in an outdoor setting. Ability to work well with a team in a field environment. Can work independently with limited to no supervision. Familiar with Microsoft Outlook.
Preferences: Knowledge of construction standards, practices, and techniques. (preferred) Knowledge of OSHA regulations (preferred) Bi-lingual skills in English/Spanish (preferred)
NOTE: Qualifying education, experience, knowledge, and skills must be documented on your job application. You may attach a resume to the application as supporting documentation but ONLY information stated on the application will be used for consideration. "See Resume" will not be accepted for qualifications.
The Flood Control District has the mission to reduce the risk of flooding in Harris County, the third most populated county in the United States, with a population in excess of 4.7 million, including the City of Houston, the nation’s fourth largest city. The Flood Control District has jurisdiction over the primary stormwater facilities in the county, which consist of approximately 1,500 channels totaling nearly 2,500 miles in length, as well as more than 60 regional stormwater detention basins, totaling more than 10,000 acres and several wetlands mitigation banks including Greens bayou.   Harris County is an Equal Opportunity Employer

Harris County Flood Control District is seeking qualified candidates for the role of Heavy Equipment Operator II.
Reporting to the Maintenance Construction Field Supervisor, the Heavy Equipment Operator II is responsible for operating various pieces of medium and small sized construction equipment, small engines, attachments, power tools and hand tools to construct, repair, and perform maintenance to channels and bayous within Harris County.
Essential Functions and Duties: Construct forms, place rebar, pour and finish concrete structures such as culverts, inlets, and manholes. Operates medium and small-sized construction equipment such as excavators, skid o steers, and other machinery for channel and bayou maintenance. Build and repair manholes, inlets, and stormwater infrastructure components. Install corrugated metal pipe outfalls, signage, gates, and bollards. Perform minor erosion control repairs and grading operations on open channels and drainage facilities. Perform sediment removal operations using excavators, including operations on slopes. Clear debris, trees, rocks, and other large obstacles from right-of-way and channel bottoms. Remove selective vegetation and perform de-snagging operations on channels. Flag traffic and act as a spotter for other equipment operators during the ingress and egress of work sites. Inspect County vehicles and equipment for safety. May perform other duties that can be added or changed as the course and scope of the job directs.
Benefits (offered only to employees in regular full-time positions): Medical Coverage Dental Coverage Vision Coverage Wellness Plan Life Insurance Long-term disability Employee Assistance Program Ten (10) days of vacation each year for the first five (5) years of service Accrual rates increase based on years of service Eleven (11) County-observed holidays and one (1) floating holiday Professional development opportunities Dependent Care Reimbursement Plan Healthcare Reimbursement Account 457 Deferred Compensation Plan
The following benefits are also available to regular full-time employment and may be available to part-time employees: Retirement Pension (TCDRS) Flexible schedule (varies by department) Transportation Assistance (Metro RideSponsor Program)
Qualifications: High school diploma or G.E.D. equivalent Three (3) years of experience operating small sized equipment. Two (2) years of experience operating medium sized equipment. One (1) year experience driving dump trucks and or rollbacks. Valid Class "B" Texas Driver’s License. Must have or obtain a Forklift certification within 90 days of employment.
Knowledge Skills, and Abilities: Good verbal & written communication skills. Can effectively communicate with coworkers and the public. Must be able to read and understand written instructions, maps, and be able to provide directions to District locations. Ability to work in an outdoor setting. Ability to work well with a team in a field environment. Can work independently with limited to no supervision. Knowledge of bayou and drainage area maintenance. Knowledge of construction standards, practices, and techniques. Knowledge of OSHA regulations. Familiar with Microsoft Office (Outlook, SharePoint, and Adobe Acrobat Professional).
Preferences: Bi-lingual skills in English/Spanish (preferred)
NOTE: Qualifying education, experience, knowledge, and skills must be documented on your job application. You may attach a resume to the application as supporting documentation but ONLY information stated on the application will be used for consideration. "See Resume" will not be accepted for qualifications.
The Flood Control District has the mission to reduce the risk of flooding in Harris County, the third most populated county in the United States, with a population in excess of 4.7 million, including the City of Houston, the nation’s fourth largest city. The Flood Control District has jurisdiction over the primary stormwater facilities in the county, which consist of approximately 1,500 channels totaling nearly 2,500 miles in length, as well as more than 60 regional stormwater detention basins, totaling more than 10,000 acres and several wetlands mitigation banks including Greens bayou.   Harris County is an Equal Opportunity Employer

The Quality Control Shop Floor Inspector will be responsible for inspecting welding quality and performing dimensional inspections on ASME code pressure vessels, ensuring all products meet strict industry and company standards. The ideal candidate will be efficient, detail-oriented, and have a thorough understanding of ASME code and welding techniques.
Key Responsibilities: Perform visual and dimensional inspections of welded and fabricated components, ensuring compliance with ASME code standards. Inspect welds for defects such as cracks, porosity, and misalignment, ensuring all welds meet quality specifications. Conduct dimensional checks of equipment, ensuring compliance with design specifications and blueprints. Record and report inspection results accurately, identifying non-conformities and recommending corrective actions when needed. Work closely with production teams to resolve quality issues and ensure consistent adherence to quality standards. Maintain up-to-date knowledge of ASME code requirements, welding techniques, and industry best practices. Participate in continuous improvement efforts to enhance quality control processes and procedures.
Schedule: 10 hour shift Monday to Friday Weekends as needed Expected hours: 50-60 per week
Benefits: Paid time off Overtime
Qualifications: High school diploma or equivalent required; relevant technical certifications preferred. Background in welding or fitting. Minimum of 3 years of experience in quality control, welding inspection, or a similar role in an ASME code fabrication environment. Strong knowledge of ASME code requirements and welding standards. Proficiency in reading and interpreting blueprints, technical drawings, and welding symbols. Experience with inspection tools and equipment such as micrometers, calipers, and other precision measuring instruments. Excellent attention to detail and problem-solving skills. Strong communication and teamwork skills.
Preferred Qualifications: Certification in welding inspection (e.g., AWS CWI) or quality control is highly desirable. Familiarity with Non-Destructive Testing (NDT) methods is a plus.

Maquinista CNC Nivel III, Turno Tarde o NocheSi buscas una cultura de excelencia, innovacin y responsabilidad, considera poner en prctica tu experiencia en Flowserve. Como colaborador individual o como lder de personal, tu mentalidad empresarial garantizar la posicin de Flowserve como el estndar global en soluciones integrales de control de flujo. Aqu, tu oportunidad de desarrollo profesional y recompensas lderes en la industria estarn respaldadas por nuestro compromiso fundamental con los valores de las personas primero, la integridad y la seguridad. En Flowserve, pensamos ms all de las oportunidades y las recompensas; nos inspira trabajar juntos para crear soluciones de control de flujo extraordinarias y hacer un mundo mejor para todos. Resumen del puesto: La planta de fabricacin de bombas Flowserve en Houston busca un Maquinista CNC para dar forma a ejes. Esta vacante es para el segundo o tercer turno. Segundo turno (14:30 - 23:00) o tercer turno (22:00 - 6:00, de domingo a jueves por la noche). LOS NUEVOS CONTRATADOS PUEDEN OBTENER UNA BONIFICACIN DE CONTRATACIN DE $2500! POSTULA PARA MS INFORMACIN! Responsabilidades y Requisitos: Ms de 5 aos de experiencia en mquinas CNC y conformado de ejes. Operacin de mquinas o equipos: Operar equipos y mquinas bsicos y realizar tareas rutinarias. Gestin de Operaciones: Realizar tareas operativas siguiendo los procesos establecidos. Mantenimiento y Reparacin de Equipos: Ayudar en el mantenimiento y la reparacin de equipos mediante la preparacin y la asistencia. Salud, Seguridad y Medio Ambiente: Seguir las instrucciones de trabajo bsicas obligatorias para proteger el medio ambiente y el bienestar propio y ajeno. Cumplimiento Operativo: Seguir un procedimiento obligatorio sencillo para garantizar que el trabajo se realice segn los estndares de calidad requeridos o para garantizar el cumplimiento de los cdigos regulatorios externos y los cdigos de conducta internos. Utilizacin de Equipos de Precisin: Interpretar y utilizar equipos e instrumentos de medicin de precisin, como micrmetros, relojes comparadores y medidores de profundidad. Instrucciones y Planos: Capacidad para leer e interpretar planos y tolerancias geomtricas. Comunicacin Interna: Intercambiar informacin con las personas mediante una interaccin corts. Polticas y procedimientos: Colabora con la direccin para comprender las polticas y los procedimientos, asegurndose de que se ajusten a las estrategias y los objetivos de la organizacin. Otras funciones segn se le asignen. Experiencia y Habilidades preferibles: Experiencia en el proceso de mecanizado de ejes Comunicacin verbal: Utiliza habilidades de comunicacin verbal claras y efectivas para expresar ideas y solicitar acciones. Planificacin y organizacin: Colabora con la direccin para planificar, organizar y priorizar actividades y alcanzar eficientemente los objetivos del negocio. Salud y seguridad: Aplica conceptos bsicos para gestionar e implementar sistemas de trabajo seguros. Experiencia con equipos: Ms de 5 aos de experiencia en mecanizado en un entorno de fabricacin o reparacin, operando tornos manuales, fresadoras o tornos/fresadoras CNC. Diploma de preparatoria/GED y de 5 a 7 aos de experiencia relevante. Este puesto est disponible para el segundo o tercer turno. Flowserve ofrece un salario competitivo, bonificaciones anuales, beneficios mdicos desde el primer da, generosas vacaciones pagadas, das festivos pagados, plan 401(k) y muchos otros excelentes beneficios. Flowserve es un fabricante lder mundial y proveedor de servicios posventa de sistemas integrales de control de flujo. nete a una empresa cuya gente est comprometida con la construccin de un futuro ms sostenible para hacer del mundo un lugar mejor para todos. Con 16,000+ empleados en 50+ pases, combinamos nuestro alcance global con presencia local. Nuestro equipo se desafa a s mismo para abordar cada situacin con ingenio y creatividad para ayudar a brindar a nuestros clientes los productos y servicios de control de flujo ms innovadores. Apoyamos a 10,000+ clientes en todo el mundo, creando productos para satisfacer las necesidades de nuestros clientes que suministran energa, agua dulce, productos farmacuticos y otros elementos esenciales a consumidores, empresas y gobiernos a nivel mundial. Lo invitamos a poner en marcha sus talentos y su carrera en Flowserve. Req ID : R-13071

Flowserve is a world-leading manufacturer and aftermarket service provider of comprehensive flow control systems. Join a company whose people are committed to building a more sustainable future to make the world better for everyone. With 16,000+ employees in 50+ countries, we combine our global reach with local presence. Our team challenges themselves to approach each situation with ingenuity and creativity to help provide our customers with the most innovative flow control products and services. We support 10,000+ customers worldwide, creating products to meet the needs of our customers who are supplying energy, fresh water, pharmaceuticals and other essentials to consumers, businesses and governments globally. We invite you to put your talents and career in motion at Flowserve. Company Overview: If a culture of excellence, innovation and ownership is what you’re searching for, consider putting your experience in motion at Flowserve. As an individual contributor, or as a leader of people, your enterprise mindset will ensure Flowserve’s position as the global standard in comprehensive flow control solutions. Here, your opportunity for professional development and industry leading rewards will be supported by our foundational commitments to the values of people first, integrity and safety. Thinking beyond opportunity and reward, at Flowserve, we are inspired by working together to create extraordinary flow control solutions to make the world better for everyone! Role Summary: Flowserve Houston pump manufacturing plant seeks a CNC Machinist to shape shafts. This opening is for second or third shift. Second Shift (2:30 - 11PM) or Third Shift (10 PM - 6 AM, Sunday night to Thursday night) NEW HIRES ARE ELIGIBLE FOR A $2500 SIGN ON BONUS! APPLY TO FIND OUT MORE! Responsibilities & Requirements: 5+ years running CNC machines and shaping shaft.Operating Machine or Equipment – Operate basic equipment and machines and carry out routine tasks.Operations Management – Carry out operational tasks by following established processes.Equipment Maintenance and Repair - Help to maintain and repair equipment by carrying out preparations and providing assistance.Health, Safety and Environment – Follow basic mandatory work instructions to safeguard the environment and the wellbeing of oneself and others.Operational Compliance – Follow a straightforward mandatory procedure to ensure that work is carried out to the required quality standards and/or to ensure adherence to external regulatory codes and internal codes of conduct.Precision Equipment Utilization – Interpret and use precision measuring equipment/instruments such as micrometers, dial indicators, and depth gauges.Instructions and Drawings – Ability to read and interpret blueprints and geometric tolerances.Internal Communications – Exchange information with people by having courteous interactions with them.Policy and procedures - Works with guidance to understand policies and procedures, while making sure they match organizational strategies and objectives.Other duties as assigned. Preferred Experience / Skills: Machining ShaftsVerbal Communication – Uses clear and effective verbal communication skills to express ideas and request actions.Planning and Organizing – Works with guidance to plan, organize, and prioritize activities to efficiently meet business objectives .Health and Safety - Applies elementary concepts to manage and apply safe systems of work.Equipment Experience – 5+ years machining experience in a manufacturing or repair environment operating manual lathes, milling machines, or CNC lathes/mills.HS Diploma / GED and 5-7 years relevant experienceThis position is available for either 2nd or 3rd shift Flowserve offers competitive pay, annual bonuses, medical benefits on day 1, generous paid vacation time, paid holidays, 401(k) and many other excellent benefits! Req ID : R-13071 Job Family Group : Operations Job Family : OP Machining EOE including Disability/Protected Veterans. Flowserve will also not discriminate against an applicant or employee for inquiring about, discussing or disclosing their pay or, in certain circumstances, the pay of their co-workers. Pay Transparency Nondiscrimination Provision If you are a qualified individual with a disability or a disabled veteran, you have the right to request a reasonable accommodation if you are unable or limited in your ability to use or access flowservecareers. com as result of your disability. You can request a reasonable accommodation by sending an email to employment@flowserve. com. In order to quickly respond to your request, please use the words "Accommodation Request" as your subject line of your email. For more information, read the Accessibility Process.

POSITION OVERVIEW: Guitar Center embodies the world of creativity and music by encouraging staff to find their own individual sound. Our mission is to develop and nurture lifelong musicians and make a difference in the world by enabling musicians and non-musicians alike to experience the joy that comes from creating music. We believe in creating inclusive environments that put our customers first all the while fulfilling our mission.As our Repair Tech (Guitar), you will provide perform maintenance and repair services on customer-owned instruments and to assist in maintenance of specific store inventory, continually building and increasing the business through great customer experience and quality work.A few special characteristics that make our Repair Technicians successful:Customer Focus: Understands customer service principles, and able to provide an excellent customer experience. Able to connect with customers in a meaningful way. Is approachable, genuine, knowledgeable, encouraging, passionate, and committed to helping customers. Able to step in to handle customer service issues.Initiative: Able to identify opportunities & issues and follow through on work activities to capitalize or resolve them. Able to learn quickly and take positive action without being requested to do so. Able to develop knowledge and skills including product, store operations, sales and leadership.Selling: Able to work through GC certification program to gain a base understanding of products and sales techniques.Training: Able to effectively train learners and communicate info and techniques so that they are retained.As our Repair Technician, you will:Interact with customers, ensuring a positive customer experienceService customer-owned instruments with a high level of craftsmanshipMaintain store owned gear, as requestedComplete warranty repair workAdditional duties as assignedWhy Guitar Center Here's just some of the rewards:For our employees who are musicians we offer the unique opportunity of gig leave--take time off to share your music with the world and return to your job after your tour! Guitar Center offers robust benefits and perks, including Medical, Dental, Vision, 401K plus company match, mental health support, paid sick/holiday/vacation time, employee discount program, and tuition reimbursement options.Requirements: Skilled understanding of repairing Guitars Preferences:Foundational product knowledge on Guitar Center products Guitar Center is an Equal Opportunity Employer and provides fair and equal employment opportunity to all employees and applicants regardless of race, color, religion, gender, sexual orientation, gender identity, national origin, age, disability, veteran status or any other protected status prohibited under Federal, State, or local laws. All employment decisions are based on valid job-related requirements.If you are a qualified individual with a disability or a disabled veteran and are unable or limited in your ability to use or access our website, you may request a reasonable accommodation to express interest in a specific opening. You can request reasonable accommodation by calling 1-ext. 2862 or by sending an email to .

FORTIFYING OUR DEFENSESMissiles and rockets are critical components of our national defense strategy. Responsible for servicing and maintaining them, Missile and Space Systems Maintenance specialists ensure these assets are fully operational at all times. From missile launchers to space lift boosters, these highly knowledgeable experts plan, organize and perform every service necessary to keep these systems in pristine working condition so they’re ready when we need them.REQUIREMENTSYou must meet several requirements before joining the Air Force. These concern your background, overall health and other standards set by the Air Force, Department of Defense and federal law.Minimum EducationYou must be 17–42 years of age, a U.S. citizen and obtain a qualifying ASVAB score. Applicants who are non-graduates or non-alternate credential holders must obtain an AFQT Test score of 65 or higher on the ASVAB ASVAB REQUIREMENTSElectronicsQualificationsKnowledge of electronic theoryCompletion of a current Single Scope Background Investigation (SSBI)Completion of 7.5 weeks of Basic Military TrainingMust be at least 17, but has not reached age 42 on the date of enlistment

Overview: CONSIDER MAKING A MOVE TO STERLING MCCALL COLLISION CENTER OF JERSEY VILLAGE!SIGN-ON BONUS FOR QUALITY CANDIDATES!WE ARE A QUALITY COLLISION CENTER WE REPAIR ALL MAKESSterling McCall Collision Center of Jersey Villageis part of the fast growing Group 1 Automotive, a leader in automotive retail. We are looking to add an additional COLLISION REPAIR/BODY & FRAME TECHNICIAN to our team. We are a high volume collision centerwith plenty of work, state of the art facility, with all the latest equipment to help you perform efficiently!In addition to competitive pay, we offer our associates the following benefits:Health, Dental, Vision, Life, and Disability insurance401(k) plan with company matchPaid Time-OffEmployee Stock Purchase PlanEmployee Vehicle Purchase ProgramProfessional work environment, with job training and advancement opportunitiesResponsibilities:Repairs vehicles per estimate and according to manufacturer standards.Notifies management of any additional repairs needed. Documents and additional parts and labor required to perform a satisfactory repair.Maintains and wears all required safety and health personal equipment, including respirator, in the manner recommended by the equipment manufacturer.Demonstrates behaviors consistent with the Company’s Values in all interactions with customers, co-workers and vendors.You need:2 PLUS Years’ experience as a collision repair technician with heavy structural collision and frame experience.ICAR or ASE certifications in auto body repair a plus.Company provides paid training.Working knowledge of all aspects of repairs for damaged vehicles including body work and when to replace or repair parts.Valid driver license in the state that you will work and a good driving record.Group 1 Automotive, a Fortune 250 company, is a leading operator of automotive dealerships and collision centers across the United States and United Kingdom. If you are in alignment with our values of integrity, transparency, professionalism, teamwork and respect - now might be the time for you to accelerate your career as part of the best company in automotive retail.To learn more about our company, visit www.group1auto.com.Apply today or refer a qualified friend.*All applicants must pass pre-employment testing to include: background checks, MVR, and drug testing in order to qualify for employment*We are an Equal Employment Opportunity EmployerIND2

Dover is a diversified global manufacturer with annual revenue of over $7 billion. We deliver innovative equipment and components, specialty systems, consumable supplies, software and digital solutions, and support services through five operating segments: Engineered Products, Fueling Solutions, Imaging & Identification, Pumps & Process Solutions and Refrigeration & Food Equipment. Dover combines global scale with operational agility to lead the markets we serve. Recognized for our entrepreneurial approach for over 60 years, our team of approximately 24,000 employees takes an ownership mindset, collaborating with customers to redefine what's possible. Headquartered in Downers Grove, Illinois, Dover trades on the New York Stock Exchange under "DOV." Additional information is available at dovercorporation.com.What You'll Do:Sets up and operates manual machines, including but not limited to mills and lathes, to perform machining operations by performing the following responsibilities:Read, process sheets, blueprints, and sketches of part to determine machining to be done, dimensional specifications, set up, and operating requirementsInterpret work instructionsIdentify, select and install proper tooling for operations being performedCalculate proper feeds and speeds for a variety of steel grades, copper, brass, aluminum and bronzeIntuitively understand capabilities of tooling and machineryUnderstand applicable quality systems and perform necessary quality inspectionsAdhere to all Waukesha Bearings policies and proceduresApply principles of Lean Manufacturing to reduced setup times and improve productivityActively participate in daily Continuous Improvement activitiesEmployee must be able to set up all necessary measuring equipment and routinely check the calibration of the equipment while measuring.What You'd Bring:Experience withMills Machines; ideally EC1600Experience using GibssCam software is strongly preferredPrior experience with precision inspection equipment including, but not limited to, micrometers, calipers, height gauges, bore gaugesProven ability to hold tight machining tolerances of less than .001”Education:One year certificate from college or technical school; or three to six months related experience and/or training; or equivalent combination of education and experience.Mental/Visual/Physical Effort:The employee is regularly required to stand and talk or hearoccasionally required to walk; sit; use hands to finger, handle, or feel; and taste or smellmust frequently lift and/or move up to 50 poundsSpecific vision abilities required by this job include close vision, depth perception, and ability to adjust focus.Material Hazards:Regularly exposed to moving mechanical partsOccasionally exposed to fumes or airborneSets up and operates manual machines, including but not limited to mills and lathes, to perform machining operations by performing the following duties.#LI-KZ1#SWEWe consider several job-related, non-discriminatory factors when determining the pay rate for a position, including, but not limited to, the position’s responsibilities, a candidate’s work experience, a candidate’s education/training, the position’s location, and the key skills needed for the position. Pay is one of the Total Rewards that we provide to compensate and recognize employees for their work.All qualified applicants will receive consideration for employment without discrimination on the basis of race, color, religion, sex, sexual orientation, gender identity, national origin, protected veteran status, disability, age, genetic information, or any other factors prohibited by law.#LI-LM1

Overview: If you reside in California, please see our California Applicant Privacy Policy for more information about our data handling practices and your data rights. Responsibilities: MV Transportation is seeking a Fleet Maintenance Manager who will be a dynamic, multi-task oriented senior professional to manage all day-to-day maintenance aspects of this fixed route bus operation. The Fleet Maintenance Manager willensurethat all contractual requirements are achieved, and duties included will consist of daily, weekly, monthly and annual reports. The Fleet Maintenance Manager must be able to properly manage a budget for maintenance program. Qualifications: Talent Requirements:Must have at least three (3) or more years of recent (within the last five (5) years) and relevant experience managing the maintenance functions of a transit bus maintenance shop similar in scope, size, and complexity and with same or similar type of transit vehicles/equipment.Must have experience managing/ directing 10 plus employees (fleet Technicians/Service Workers/Cleaners).Experience working with 50 + buses within the last year.Previous passenger transportation in current project or similar environment preferred.Must be able to manage and interface with client.Must have the ability to track and control parts inventories, vendors and suppliers.Must be able to properly prioritize, implement and manage work schedules, projects and assignments.Must be able to manage the financial/accounting aspects of a fleet maintenance operation.Must be able to communicate effectively with all levels of staff in written and oral formats.Must have computer skills including word processing, spreadsheets and Microsoft outlook.Must have technical competence with light/medium/heavy duty vehicle repair and preventive maintenance.Must display initiative, professionalism, candor and tactat all times.ASE or manufacture’s certifications a plus.Technical experience with fixed route transit bus maintenance.Solid knowledge of managing audits, PM schedules.Experience with Diesel, CNG, and Alternative fuels a plus.Must have a CDL class B with passenger and airbrake endorsement.MV Transportation is committed to a policy of Equal Employment Opportunity and will not discriminate against an applicant or employee on the basis of race, color, religion, creed, national origin or ancestry, sex, physical or mental disability, veteran or military status, genetic information or any other legally recognized protected basis under federal, state or local laws, regulations or ordinances. The information collected by this application is solely to determine suitability for employment, verify identity and maintain employment statistics on applicants.Where permissible under applicable state and local law, applicants may be subject to a pre-employment drug test and background check after receiving a conditional offer of employment.#appcast

$23.00/hourShift Premium may ApplyImmediately hiring! We’re looking for responsible, detailed people who are ready to accelerate their automotive repair career! Whether you have worked in an auto garage or car dealership, this job is for you! Join our team of driven professionals at Avis Budget Group enterprise.What You’ll Do:As an automotive technician, you will be responsible for conducting essential repairs on a diverse range of vehicle brands and models, requiring minimal technical oversight. Your tasks will encompass various maintenance activities such as oil changes, lubrication, tire repairs, and potentially warranty repairs based on your proficiency level. In addition, you may support our skilled mechanics in handling intricate repair procedures.Perks You’ll Get:Bi-weekly hourly wage (New York and Puerto Rico: weekly wage)On-the-job training to expand your automotive abilities and help to obtain ASE CertificatesPaid time offMedical, dental and other insuranceFlexible spending account opportunity to contribute up to $270 as a tax-free benefit for public transportation or parking expensesRetirement benefits (401k)Employee discounts, including discounted car rental and discounted prices on the purchase of Avis/Budget cars* Above perks may vary based on full-time/part-time status and locationWhat We’re Looking For:Valid Driver’s License and good driving recordAt least 2 years of auto repair experience or coursework with automotive certifications1 ASE certification (ability to acquire 2 additional ASE certifications within first year)Knowledgeable in areas covered by the ASE certification programs, including, but not limited to, Engine Repair, Drive Train/Axles, Suspension/Steering, Brakes, Electrical, Heating/Air Conditioning, Engine Performance and Light Vehicle/DieselComfortable working in a mechanical shop with moderate or loud noise levelsMust have a complete set of tools required for auto repair and maintenanceBasic computer skills including typing, data entryMust be able to lift up to 50 pounds, continuously stand, bend, reach, walk, sit and kneel frequently, enter, exit and drive vehiclesMust be 18 years of age and legally authorized to work in the United StatesThis position requires regular, on-site presence and cannot be performed remotelyPrevious Original Equipment Manufacturer (OEM) experience preferred, providing an added advantage! Who We Are Here at Avis Budget Group, you will be joining a team of 25,000 driven people, performing with purpose. Together, we’re moving the future of transportation forward with our innovative, customer-focused solutions.Our culture is performance driven, where we encourage and support each other to be at our best through leadership, training, tools, and rewards.We are proud to make a positive difference to the lives of our colleagues, customers, and communities where we operate.Avis Budget Group is an Equal Opportunity Employer – Qualified applicants will receive consideration for employment without regard to their race, color, religion, sex, sexual orientation, gender identity, national origin, disability, status as a protected veteran or any other category protected by applicable law. This advertisement does not constitute a promise or guarantee of employment. This advertisement describes the general nature and level of this position only. Essential functions and responsibilities may change as business needs require. The compensation and benefits information is accurate as of the date of this posting.The Company reserves the right to modify this information at any time, with or without notice, subject to applicable law. This position may be with any affiliate of Avis Budget Group. HoustonTexasUnited States of America

We are seeking an energetic HeavyEquipment Mechanic to join our La Porte, TX team, who can change direction at a moment’s notice to maintain all mobile equipment to include but not limited to repairs, diagnosis, and troubleshooting. Performs daily preventative maintenance as assigned by supervisor.Health and Safety is our #1 priority and we live it 3-6-5!Competitive pay and benefitsComprehensive health benefits coverage after 30 days of full-time employmentGroup 401K with company matching component and Employee Stock Purchase PlanOpportunities for growth and development for all the stages of your careerGenerous paid time off, company paid training and tuition reimbursementPositive and safe work environmentsEnsures Health and Safety is the number one goal by following policies, processes, and acting in a safe manner at all timesDisassemble/Reassemble heavy and mobile equipment to troubleshoot, diagnose and repairFabricate metal pieces and replace gaskets as neededTroubleshoot, repair and test all equipment to ensure functionalityUtilize propylene cutting rigRepair equipment using MIG and/or stick weldingOther duties as assignedEnter data for repairs, diagnosis, preventative maintenance, inventory check out and timeComplete daily work and training on computersWhat does it take to work at Clean Harbors High School Diploma or equivalentMust pass Bennett Mechanical II testRequired Diesel Certification3+ years’ experience with heavy and mobile equipment repairAir Conditioning Certification or equivalent requiredCaterpillar and Kubota engine repair experience, certifications or education a plus!Hydraulics Systems troubleshooting repair requiredMust understand schematics to troubleshoot 12&24v heavy equipment systemsRequired cutting rig (propylene cutting torch)Valid Drivers’ LicenseComputer literateJoin our team today! To learn more about our company, and to apply online for this exciting opportunity, visit us athttps://careers.cleanharbors.com/Clean Harborsis the leading provider of environmental, energy and industrial services throughout North America. The Company serves a diverse customer base, including a majority of the Fortune 500 companies, thousands of smaller private entities and numerous federal, state, provincial and local governmental agencies. Through its Safety-Kleen subsidiary, Clean Harbors also is a premier provider of used oil recycling and re-refining, parts washers and environmental services for the small quantity generator market. Headquartered in Norwell, Massachusetts, Clean Harbors has waste disposal facilities and service locations throughout the United States and Canada, as well as Mexico and Puerto Rico.We are an equal opportunity in employer to all individuals regardless of race, color, religion, sex, age, national origin, pregnancy, familial status, disability status, veteran status, citizenship status, genetic information or any other characteristic protected under Federal, State or Local law.Clean Harbors is a Military & Veteran friendly company.*CH #LI-MM1

Line of Business: OtherPay Range: $82,830.00 – $110,469.99About UsHeidelberg Materials is one of the world's largest suppliers of building materials. Heidelberg Materials North America operates over 450 locations across the U.S. and Canada with approximately 9,000 employees.What You'll Be DoingDevelop and manage detailed maintenance schedules and work orders to ensure timely and efficient maintenance activities.Coordinate with maintenance technicians, engineering teams, and operations staff to schedule and prioritize tasks across multiple product lines.Implement preventive maintenance strategies to minimize equipment downtime and extend asset lifespan.Estimate time, resources, and costs for maintenance jobs, manage inventory, and work with vendors to procure necessary tools and parts.Ensure all maintenance activities comply with safety regulations and industry standards, while maintaining accurate records and running reports for management.What Are We Looking ForStrong analytical and problem-solving skills.Excellent communication and coordination abilities.Proficiency in maintenance planning software and tools, with a preference for previous experience using SAP.Ability to work independently and as part of a team.Commitment to safety and quality standards.Work EnvironmentFast-paced and dynamic work environment.Collaborative team culture.Opportunities for professional growth and development.What We OfferCompetitive base salary and participation in our annual incentive plan.401(k) retirement savings plan with an automatic company contribution as well as matching contributions.Highly competitive benefits programs, including:Medical, Dental, and Vision along with Prescription Drug Benefits.Health Savings Account (HSA), Health Reimbursement Account (HRA), and Flexible Spending Account (FSA).AD&D, Short- and Long-Term Disability Coverage as well as Basic Life Insurance.Paid Bonding Leave, 15 days of Paid Vacation, 40 hours of Paid Sick Leave, and 10 Paid Holidays.Equal Opportunity Employer - Minority / Female / Veteran / Disabled

What you will doJohnson Controls Inc. is looking for forward-thinking talent to join our organization to support the fast-growing HVAC business in North America.During these unprecedented times, JCI is committed to the health and safety of all employees, customers, partners, and the communities we serve.At Johnson Controls you’ll have the opportunity to work on some of the most exciting and relevant facilities, HVAC chillers and commercial products in today’s market. Our talented people empower us, and we believe in being part of a team that is open, collaborative, results-oriented, hardworking and above all fun.How will you do itWe are looking for skilled HVAC Technicians who have experience with Residential and/or ducted products, air cooled and/or water-cooled chillers, AHU’s or Roof Top ducted units. We provide factory certification through our Service Technical Academy (STA) with recognition, monetary rewards, and advancement. We offer incentive programs and a #1 focus on employee safety. We also provide tools, uniforms, and a company vehicle to perform your job and service our customers to the highest standard.Provide our customers with the highest level of service to solve facility inefficiencies and resolve service-related items. As a trusted advisor to our customers, you will provide solutions and outcomes at the time of commissioning and aftermarket service. Provide recommendations and solutions to ensure facility is running efficiently to include upselling opportunities. Provide quotes to support recommendations and solutions.What we look forRequiredMinimum of 5 years’ experience in Industrial setting.Be a dedicated member of a North America Branch team willing to learn and be responsible for startup, commissioning, trouble shooting and aftermarket services for this fast-growing business.Must be a member or willing to join a local Union. Able to repair but not limited to centrifugal compressors, steam turbines, screw chillers system components.Opportunity to invest in career development. You will enroll in training programs and JCI’s STA to gain knowledge in HVAC products and sales quoting.You will work collaboratively with other local market mechanics.Attention to detail through interpersonal, digital, and written skills.Able to write and communicate to the customer problem, cause, and corrective actions.Able to provide quotes to customers and participate in JCI’s Service Plus Rewards program.Self-starter with a passion/ desire to learn and apply on the job.Prioritize safety in all formsUniversal EPA refrigerants license, applicable state or local licensing, and valid driver's license

Overview: The Waterproofing division of Beacon Building Products is the largest distributor of high-demand sealants, waterproofing, concrete repair, and fire protection products. Our exceptional culture, employee tenure, and industry reputation are unparalleled. We're expanding our footprint coast-to-coast to numerous locations. Don't miss this chance to work with a dedicated team and grow your career in the waterproofing industry!Joining Beacon Building Products as anOutside Sales Representativemeans becoming part of a values-driven organization. Our core principles guide everything we do: putting people first, prioritizing safety, doing what's right, taking pride in our work, continuously improving, and making significant strides towards a more sustainable future. What you will earn:: Competitive Pay: We make sure that your hard work is recognized.401(k) Match: Take advantage of our employer-matching contributions to help grow your retirement savings.Medical, Dental, and Vision Benefits: Experience the peace of mind that comes with our comprehensive benefits package designed to prioritize your well-being.Employee Assistance Program (EAP): Receive support through personalized care, family services, therapy, legal and financial assistance, and wellness programs.Paid Leave: Our company holidays and paid time off and parental leave programs help employees to recharge, achieve work-life balance, and pursue personal interests.Paid Training and Advancement Opportunities: Open doors to exciting possibilities by engaging in our dynamic learning programs, which include the opportunity to earn valuable certifications.Legal Assistance: Access over 20,000 lawyers and comprehensive legal coverage for home, financial, consumer, auto, family, civil lawsuits, and estate planningsaving you time and legal fees.Protection for Your Finances & Identity: Stay secure with Norton LifeLock, offering identity alerts, credit monitoring, device security, dark web monitoring, parental controls, and more.Pet Insurance: Customize a plan that fits your budget, covering accidents, illnesses, and wellness, with Spot Pet Insurance.#BenA What you will do:: Sell waterproofing building products including high-demand sealants, concrete repair and fire protection products.Drive profitable growth and achieve sales and margin budgetsProspect and identify new opportunities and customersDevelop and maintain relationships with customer base and vendorsPartner with branch operations to deliver an outstanding customer experienceUse customer relationship tools like SalesforceContinue to develop sales skills and expand product knowledgeTravel extensively within assigned market What you will bring:: Proven track record in a sales or related leadership roleFamiliarity with construction, building materials or wholesale distribution a plusSpanish bilingual proficiency a plusValid driver’s license and clean driving record requiredA desire to find creative solutions in a dynamic, changing environmentDrive to build and maintain positive relationshipsStrong analytical ability, communication and organization skills, and attention to detail

Overview: WHY COOLSYS At CoolSys, we offer more than just a jobwe provide stability, growth, and industry-leading benefits for our employees. As a large company serving diverse customers, we invest in our team with:Competitive Compensation: Competitive pay from $30-$50 per hour.Ongoing Education & Training: Access to state-of-the-art facilities and paid online training.Comprehensive Benefits: Medical, Dental, Vision, and Prescription coverage, paid vacation/holidays, and a 401(K) match with 100% immediate vesting.Year-Round, Diverse Work: Stay engaged with consistent, interesting projects throughout the year, working across various industries and systems to keep learning and growing.Extra Perks: Quarterly bonus plan, tuition reimbursement, employee discounts on vehicles, hotels, theme parks, pet insurance, and more.Join us and advance your career while working with top-tier clients in the HVAC and refrigeration industry! Responsibilities: This position is responsible for assisting in the repair and overhaul of equipment, refrigeration, heating, and ventilation equipment to ensure customer needs are met efficiently, accurately, and on time.Provides service to the customer base by repairing and overhauling equipment, such as compressors, water pumps, air handlers, and electrical and mechanical control devices in a safe, efficient, and timely manner that exceeds customers’ expectationsProvides general repair work on refrigeration, heating, and ventilation equipment, such as air conditioning units, evaporative condensers, ice machine equipment, water pumps, gas furnaces, compressors, and electric motors in a safe and timely manner.Provides preventative maintenance activities for customers by diagnosing equipment malfunction and any operating deficiency of the mechanical equipment to ensure quality work performance for the customer base.Test malfunctioning systems and components using electrical and/or mechanical skills.Maintain legible corporate and personal records of work history.Provides department support by processing job tickets, and work orders to the necessary department promptly.Provide support by picking up, delivering, and installing cases.Perform work on minor construction and remodeling projects including startups of new installations.Drives company vehicle in a safe manner.Performs other related duties and projects as assigned by management. Qualifications: High school diploma/GED.EPA certification.Certification from an accredited vocational-technical or trade school is a plus!Minimum 5+ years of commercial refrigeration experience required.Experience working on refrigeration equipment in convenience stores or supermarkets is a strong plus.Familiarity with single systems and rack systems along with previous work on display cases and walk-in boxes is very helpful.Must have a good driving record and be able to work independently.Emergency on-call availability is a basic requirement.Must be able to lift to 60 lbs. with no assistance and also be able to sit and/or stand for several hours at a time. Join Us: Today, there are 26 different companies that make up the CoolSys family of brands.Our valued employees are at the heart of our continued growth and success. We invite you to be part of that growth!Connect with usonFacebookandTwitter.Coolsysis an EEO/AA Employer. All qualified individuals - Including all ages, colors, disability, ethnicity, family or marital status, gender identity or expression, language, national origin, physical and mental ability, political affiliation, race, religion, sexual orientation, socio-economic status, veteran status, and other characteristicsare encouraged to apply. Pre-employment background screening (criminal andMVR for driving positions) anddrug testing are required for all positions.Coolsyswill consider qualified applicants with criminal histories in a manner consistent with federal law, state law, or local ordinance.Sr, senior, Service Tech, refridgeration, HVAC, refrigeration, HVAC-R, HVAC/R, diagnostic, commercial, service, install, mechanical, mechanic, apprentice, AC, field service, chiller, specialist, HVACR, supermarket, rack systems

Flowserve is a world-leading manufacturer and aftermarket service provider of comprehensive flow control systems. Join a company whose people are committed to building a more sustainable future to make the world better for everyone. With 16,000+ employees in 50+ countries, we combine our global reach with local presence. Our team challenges themselves to approach each situation with ingenuity and creativity to help provide our customers with the most innovative flow control products and services. We support 10,000+ customers worldwide, creating products to meet the needs of our customers who are supplying energy, fresh water, pharmaceuticals and other essentials to consumers, businesses and governments globally. We invite you to put your talents and career in motion at Flowserve. Company Overview: If a culture of excellence, innovation and ownership is what you’re searching for, consider putting your experience in motion at Flowserve. As an individual contributor, or as a leader of people, your enterprise mindset will ensure Flowserve’s position as the global standard in comprehensive flow control solutions. Here, your opportunity for professional development and industry leading rewards will be supported by our foundational commitments to the values of people first, integrity and safety. Thinking beyond opportunity and reward, at Flowserve, we are inspired by working together to create extraordinary flow control solutions to make the world better for everyone! Role Summary: The CNC Machinist will set up and operate a variety of machine tools to produce precision parts and instruments. Includes precision instrument makers who fabricate, modify, or repair mechanical instruments. May also fabricate and modify parts to make or repair machine tools or maintain industrial machines, applying knowledge of mechanics, mathematics, metal properties, layout, and machining procedures. Must have Horizontal boring machine experience (HBM) This will be a 2nd shift opportunity; Overtime may be required. Responsibilities: Operating CNC Machines, BMH, Manual Machines, CNC Lathe, VTL, HBMOperating Machine or Equipment – Operate basic equipment and machines and carry out routine tasks.Operations Management – Carry out operational tasks by following established processes.Equipment Maintenance and Repair - Help to maintain and repair equipment by carrying out preparations and providing assistance.Health, Safety and Environment – Follow basic mandatory work instructions to safeguard the environment and the wellbeing of oneself and others.Operational Compliance – Follow a straightforward mandatory procedure to ensure that work is carried out to the required quality standards and/or to ensure adherence to external regulatory codes and internal codes of conduct.Precision Equipment Utilization – Interpret and use precision measuring equipment/instruments such as micrometers, dial indicators, and depth gauges.Instructions and Drawings – Ability to read and interpret blueprints and geometric tolerances.Internal Communications – Exchange information with people by having courteous interactions with them.Policy and procedures - Works with guidance to understand policies and procedures, while making sure they match organizational strategies and objectives.Other duties as assigned. Requirements: Equipment Experience – 2+ years machining experience in a manufacturing or repair environment operating CNC Machines, manual lathes, milling machines.HS Diploma / GED and 3-5 years relevant experienceExperience operating LARGE machinesHBM Machine, tooling for Line Boring Preferred Experience / Skills: Verbal Communication – Uses clear and effective verbal communication skills to express ideas and request actions.Planning and Organizing – Works with guidance to plan, organize, and prioritize activities to efficiently meet business objectives.Health and Safety - Applies elementary concepts to manage and apply safe systems of work Flowserve offers competitive pay, annual bonuses, medical benefits on day 1, generous paid vacation time, paid holidays, 401(k) and many other excellent benefits Req ID : R-14270 Job Family Group : Operations Job Family : OP Machining EOE including Disability/Protected Veterans. Flowserve will also not discriminate against an applicant or employee for inquiring about, discussing or disclosing their pay or, in certain circumstances, the pay of their co-workers. Pay Transparency Nondiscrimination Provision If you are a qualified individual with a disability or a disabled veteran, you have the right to request a reasonable accommodation if you are unable or limited in your ability to use or access flowservecareers. com as result of your disability. You can request a reasonable accommodation by sending an email to employment@flowserve. com. In order to quickly respond to your request, please use the words "Accommodation Request" as your subject line of your email. For more information, read the Accessibility Process.

Maquinista Manual Resumen del rol: El maquinista manual tendr un amplio conocimiento sobre un fondo diverso que ejecuta varias mquinas manuales, incluidas, entre otras, fresadoras verticales y horizontales, tornos verticales y horizontales y rectificadoras. Esta persona tendr experiencia en la configuracin y marcacin de varias partes de su mquina. El maquinista QRC de la bomba ser responsable de fabricar piezas a partir de materia prima, as como de mecanizar piezas existentes a nuevas dimensiones o mecanizar piezas reparadas. El maquinista debe ser capaz de trabajar de forma independiente y con instrucciones limitadas, pero siguiendo hojas de ruta y / o dibujos de piezas. Podrn seleccionar insertos de herramientas adecuados, velocidades y alimentaciones segn sea necesario y lo requieran para cumplir con los requisitos de la pieza y el material que se est mecanizando. Responsabilidades: El maquinista manual es responsable de configurar y mecanizar piezas y componentes para todas las bombas y equipos de coquizacin en cualquier mquina en nuestro taller. Trabajar de forma segura y ayudar a los colegas a trabajar de forma segura. Seguir el resumen previo al trabajo y todas las listas de verificacin antes de mecanizar una pieza. Seguir todos los fresadores y procedimientos de mecanizado Piezas de mquinas que utilizan mandrinadoras horizontales manuales, tornos verticales, tornos de motor, molinos, rectificadoras y taladros. Capacidad para trabajar eficientemente dentro de ventanas de tiempo fijas para cada proceso de mecanizado. Capacidad para mantener tolerancias dentro de .0005", e inspeccionar piezas usando micrmetros, medidores, etc. Capacidad para leer impresiones / dibujos y ejecutar en funcin de los datos proporcionados Fabricar herramientas y hardware como parte de la mejora continua de la instalacin. Coordinar con ventas, operaciones, ingenieros y clientes segn sea necesario. Exhibir un comportamiento que fomente la formacin de equipos, la toma de decisiones, la resolucin de problemas y las mejoras continuas. Capacidad para mecanizar una variedad de metales como aceros inoxidables de las series 300 y 400, Inconel 625 y 718, acero al carbono, etc. Cumplir con todas las polticas y procedimientos de Flowserve; especficamente en torno al tiempo y la asistencia, la seguridad y la productividad Requisitos bsicos: Diploma de escuela secundaria o equivalente. 5 aos de experiencia en mecanizado manual, incluyendo HBM y/o VTL Debe tener un conjunto personal de herramientas, micrmetros, amoladoras manuales y caja de herramientas enrollable. Capaz de permanecer de pie durante largos perodos. Demostracin de atencin al detalle y al proceso. Habilidades de comunicacin verbal y escrita en ingls competente Excelentes habilidades de organizacin, capacidad para trabajar de forma independiente, capaz de resolver problemas y priorizar las asignaciones de trabajo. Debe poder trabajar horas extras, incluidos fines de semana y das festivos. Habilidades y destrezas preferidas: Conocimientos informticos, incluidas las aplicaciones de MS Office. Atencin demostrada al detalle y a los procesos Excelentes habilidades organizativas Capacidad para trabajar de forma independiente, resolver problemas y priorizar las asignaciones de trabajo con el apoyo del lder del equipo y el supervisor Debe ser capaz y estar dispuesto a trabajar horas extras, incluidos los fines de semana y das festivos, cuando lo dicten las emergencias del cliente y las necesidades comerciales. Conocimiento de las actividades del entorno de servicio, incluyendo DCI, mecanizado, montaje, prueba y servicio de campo para equipos rotativos. Capacidad para priorizar y gestionar mltiples tareas en un entorno de trabajo acelerado y cambiante Experiencia previa trabajando en el entorno acelerado e impredecible en torno a los servicios de reparacin. Fuerte impulso para hacer que las cosas sucedan y una fuerte actitud de "lo puedo hacer" Flowserve es un fabricante lder mundial y proveedor de servicios posventa de sistemas integrales de control de flujo. nete a una empresa cuya gente est comprometida con la construccin de un futuro ms sostenible para hacer del mundo un lugar mejor para todos. Con 16,000+ empleados en 50+ pases, combinamos nuestro alcance global con presencia local. Nuestro equipo se desafa a s mismo para abordar cada situacin con ingenio y creatividad para ayudar a brindar a nuestros clientes los productos y servicios de control de flujo ms innovadores. Apoyamos a 10,000+ clientes en todo el mundo, creando productos para satisfacer las necesidades de nuestros clientes que suministran energa, agua dulce, productos farmacuticos y otros elementos esenciales a consumidores, empresas y gobiernos a nivel mundial. Lo invitamos a poner en marcha sus talentos y su carrera en Flowserve. Req ID : R-13316

POSITION OVERVIEW: Guitar Center embodies the world of creativity and music by encouraging staff to find their own individual sound. Our mission is to develop and nurture lifelong musicians and make a difference in the world by enabling musicians and non-musicians alike to experience the joy that comes from creating music. We believe in creating inclusive environments that put our customers first all the while fulfilling our mission.As our Repair Tech (Guitar), you will provide perform maintenance and repair services on customer-owned instruments and to assist in maintenance of specific store inventory, continually building and increasing the business through great customer experience and quality work.A few special characteristics that make our Repair Technicians successful:Customer Focus: Understands customer service principles, and able to provide an excellent customer experience. Able to connect with customers in a meaningful way. Is approachable, genuine, knowledgeable, encouraging, passionate, and committed to helping customers. Able to step in to handle customer service issues.Initiative: Able to identify opportunities & issues and follow through on work activities to capitalize or resolve them. Able to learn quickly and take positive action without being requested to do so. Able to develop knowledge and skills including product, store operations, sales and leadership.Selling: Able to work through GC certification program to gain a base understanding of products and sales techniques.Training: Able to effectively train learners and communicate info and techniques so that they are retained.As our Repair Technician, you will:Interact with customers, ensuring a positive customer experienceService customer-owned instruments with a high level of craftsmanshipMaintain store owned gear, as requestedComplete warranty repair workAdditional duties as assignedWhy Guitar Center Here's just some of the rewards:For our employees who are musicians we offer the unique opportunity of gig leave--take time off to share your music with the world and return to your job after your tour! Guitar Center offers robust benefits and perks, including Medical, Dental, Vision, 401K plus company match, mental health support, paid sick/holiday/vacation time, employee discount program, and tuition reimbursement options.Requirements: Skilled understanding of repairing Guitars Preferences:Foundational product knowledge on Guitar Center products Guitar Center is an Equal Opportunity Employer and provides fair and equal employment opportunity to all employees and applicants regardless of race, color, religion, gender, sexual orientation, gender identity, national origin, age, disability, veteran status or any other protected status prohibited under Federal, State, or local laws. All employment decisions are based on valid job-related requirements.If you are a qualified individual with a disability or a disabled veteran and are unable or limited in your ability to use or access our website, you may request a reasonable accommodation to express interest in a specific opening. You can request reasonable accommodation by calling 1-ext. 2862 or by sending an email to .

KEEPING PIPES FLOWINGThe Air Force must maintain thousands of miles of fuel and water lines essential to our daily operations. It’s the job of Water and Fuel Systems Maintenance specialists to manage the plumbing, wastewater collection systems, liquid fuel storage and natural gas distribution systems on every base. These professionals are highly trained in a wide variety of areas, including the principles of operation and construction and fire suppression systems in order to keep our bases running smoothly while upholding the highest environmental standards.REQUIREMENTSYou must meet several requirements before joining the Air Force. These concern your background, overall health and other standards set by the Air Force, Department of Defense and federal law.Minimum EducationYou must be 17–42 years of age, a U.S. citizen and obtain a qualifying ASVAB score. *High School Students may start their application as early as the end of their junior year. Applicants who are non-graduates or non-alternate credential holders must obtain an AFQT Test score of 65 or higher on the ASVAB. ASVAB Score Requirements47 Mechanical (M) and 28 Electronics (E)QualificationsPossession of a valid driver’s license to operate government motor vehiclesFreedom from fear of confined spaces Freedom from fear of heightsNormal color visionCompletion of 7.5 weeks of Basic Military TrainingMust be at least 17, but has not reached age 42 on the date of enlistment

Dover is a diversified global manufacturer with annual revenue of over $7 billion. We deliver innovative equipment and components, specialty systems, consumable supplies, software and digital solutions, and support services through five operating segments: Engineered Products, Fueling Solutions, Imaging & Identification, Pumps & Process Solutions and Refrigeration & Food Equipment. Dover combines global scale with operational agility to lead the markets we serve. Recognized for our entrepreneurial approach for over 60 years, our team of approximately 24,000 employees takes an ownership mindset, collaborating with customers to redefine what's possible. Headquartered in Downers Grove, Illinois, Dover trades on the New York Stock Exchange under "DOV." Additional information is available at dovercorporation.com.What You'll Do:Sets up and operates manual machines, including but not limited to mills and lathes, to perform machining operations by performing the following responsibilities:Read, process sheets, blueprints, and sketches of part to determine machining to be done, dimensional specifications, set up, and operating requirementsInterpret work instructionsIdentify, select and install proper tooling for operations being performedCalculate proper feeds and speeds for a variety of steel grades, copper, brass, aluminum and bronzeIntuitively understand capabilities of tooling and machineryUnderstand applicable quality systems and perform necessary quality inspectionsAdhere to all Waukesha Bearings policies and proceduresApply principles of Lean Manufacturing to reduced setup times and improve productivityActively participate in daily Continuous Improvement activitiesEmployee must be able to set up all necessary measuring equipment and routinely check the calibration of the equipment while measuring.What You'd Bring:Experience withMills Machines; ideally EC1600Experience using GibssCam software is strongly preferredPrior experience with precision inspection equipment including, but not limited to, micrometers, calipers, height gauges, bore gaugesProven ability to hold tight machining tolerances of less than .001”Education:One year certificate from college or technical school; or three to six months related experience and/or training; or equivalent combination of education and experience.Mental/Visual/Physical Effort:The employee is regularly required to stand and talk or hearoccasionally required to walk; sit; use hands to finger, handle, or feel; and taste or smellmust frequently lift and/or move up to 50 poundsSpecific vision abilities required by this job include close vision, depth perception, and ability to adjust focus.Material Hazards:Regularly exposed to moving mechanical partsOccasionally exposed to fumes or airborneSets up and operates manual machines, including but not limited to mills and lathes, to perform machining operations by performing the following duties.#LI-KZ1#SWEWe consider several job-related, non-discriminatory factors when determining the pay rate for a position, including, but not limited to, the position’s responsibilities, a candidate’s work experience, a candidate’s education/training, the position’s location, and the key skills needed for the position. Pay is one of the Total Rewards that we provide to compensate and recognize employees for their work.All qualified applicants will receive consideration for employment without discrimination on the basis of race, color, religion, sex, sexual orientation, gender identity, national origin, protected veteran status, disability, age, genetic information, or any other factors prohibited by law.#LI-LM1

Overview: If you reside in California, please see our California Applicant Privacy Policy for more information about our data handling practices and your data rights. Responsibilities: MV Transportation is seeking an Assistant Fleet Maintenance Manager toassist theFleetMaintenance Managerwithmanagement ofthe day-to-day maintenance aspects of the operation of CNG and propane vehicles. The Assistant FleetMaintenanceManager’s responsibilities will include, but not be limited to, assisting theFleetMaintenance Manager with the oversight of maintenance personnel, the organization of the maintenance yard and various administrative duties. The Assistant FleetMaintenanceManager shall be responsible for supervising the maintenance operation during shifts when the Fleet Maintenance Manager is not at the shop. Qualifications: Talent Requirements:Must be CDL licensed.Strong supervisory experience; must be able to supervise 30+ personnel.Must have the ability to track and control parts inventories, vendors and suppliers.Must be able to properly prioritize, implement and manage work schedules, projects and assignments.Must have the ability to manage the financial/accounting aspects of a fleet maintenance operation.Must be able to communicate effectively with all levels of staff in written and oral formats.Must have computer skills including word processing, spreadsheets and Microsoft Outlook.Must have technical competence with light/medium/Heavy duty vehicle repair and preventive maintenance.Must display initiative, professionalism, candor and tactat all times.Must have a minimum of three (3) years fleet/vehicle maintenance supervision experience.ASE Certified fortruck/transit preferred.Diesel experience required.MV Transportation is committed to a policy of Equal Employment Opportunity and will not discriminate against an applicant or employee on the basis of race, color, religion, creed, national origin or ancestry, sex, physical or mental disability, veteran or military status, genetic information or any other legally recognized protected basis under federal, state or local laws, regulations or ordinances. The information collected by this application is solely to determine suitability for employment, verify identity and maintain employment statistics on applicants.Where permissible under applicable state and local law, applicants may be subject to a pre-employment drug test and background check after receiving a conditional offer of employment.#appcast

$24.00/hourShift Premium may ApplyImmediately hiring! Are you a diligent and meticulous individual with expertise in automotive repair If you have experience working in an auto garage or car dealership, we want you to join the Avis Budget Group enterprise!What You’ll Do:You’ll perform standard and complex repairs, including warranty, on a wide variety of auto makes and models with no technical supervision, including the diagnosis and repair of engines, transmissions, exhaust, brakes, electrical, air conditioning and computer systems. You may also act as a technical expert to other technicians in the shop.Perks You’ll Get:Bi-weekly hourly wage (New York and Puerto Rico: weekly wage)On-the-job training in our vehicle makes and modelsPaid time offMedical, dental and other insuranceFlexible spending account opportunity to contribute up to $270 as a tax-free benefit for public transportation or parking expensesRetirement benefits (401k)Employee discounts, including discounted car rental and discounted prices on the purchase of Avis/Budget cars* Above perks may vary based on full-time/part-time status and locationWhat We’re Looking For:Valid Driver’s LicenseMinimum 3 years of auto repair experience, holding 3 ASE (ability to acquire 2 additional ASE certificates within first year)Knowledgeable in the following areas covered by the ASE certification programs, including but not limited to, Engine Repair, Drive Train/Axles, Suspension/Steering, Brakes, Electrical, Heating/Air Conditioning and Engine Performance, Light Vehicle/DieselComfortable working in a mechanical shop with moderate or loud noise levelsMust have a complete set of tools required for auto repair and maintenanceBasic computer skills including typing, data entryMust be able to lift up to 50 pounds, continuously stand, bend, reach, walk, sit and kneel frequently, enter, exit and drive vehiclesMust be 18 years of age and legally authorized to work in the United StatesThis position requires regular, on-site presence and cannot be performed remotelyPrevious Original Equipment Manufacturer (OEM) experience preferred, providing an added advantage! Who We Are:Here at Avis Budget Group, you will be joining a team of 25,000 driven people, performing with purpose. Together, we’re moving the future of transportation forward with our innovative, customer-focused solutions.Our culture is performance driven, where we encourage and support each other to be at our best through leadership, training, tools, and rewards.We are proud to make a positive difference to the lives of our colleagues, customers, and communities where we operate.The fine print: Avis Budget Group is an equal opportunity employer – M/F/Veterans/Disabled.This role requires the ability to lift up to 50 pounds, continuously stand, walk, sit and kneel frequently, and enter and exit vehicles. This advertisement does not constitute a promise or guarantee of employment. This advertisement describes the general nature and level of this position only. Essential functions and responsibilities may change as business needs require. This position may be with any affiliate of Avis Budget Group.Avis Budget Group is an Equal Opportunity Employer – Qualified applicants will receive consideration for employment without regard to their race, color, religion, sex, sexual orientation, gender identity, national origin, disability, status as a protected veteran or any other category protected by applicable law. This advertisement does not constitute a promise or guarantee of employment. This advertisement describes the general nature and level of this position only. Essential functions and responsibilities may change as business needs require. The compensation and benefits information is accurate as of the date of this posting. The Company reserves the right to modify this information at any time, with or without notice, subject to applicable law. This position may be with any affiliate of Avis Budget Group.HoustonTexasUnited States of America

We are seeking an energetic HeavyEquipment Mechanic to join our La Porte, TX team, who can change direction at a moment’s notice to maintain all mobile equipment to include but not limited to repairs, diagnosis, and troubleshooting. Performs daily preventative maintenance as assigned by supervisor.Health and Safety is our #1 priority and we live it 3-6-5!Competitive pay and benefitsComprehensive health benefits coverage after 30 days of full-time employmentGroup 401K with company matching component and Employee Stock Purchase PlanOpportunities for growth and development for all the stages of your careerGenerous paid time off, company paid training and tuition reimbursementPositive and safe work environmentsEnsures Health and Safety is the number one goal by following policies, processes, and acting in a safe manner at all timesDisassemble/Reassemble heavy and mobile equipment to troubleshoot, diagnose and repairFabricate metal pieces and replace gaskets as neededTroubleshoot, repair and test all equipment to ensure functionalityUtilize propylene cutting rigRepair equipment using MIG and/or stick weldingOther duties as assignedEnter data for repairs, diagnosis, preventative maintenance, inventory check out and timeComplete daily work and training on computersWhat does it take to work at Clean Harbors High School Diploma or equivalentMust pass Bennett Mechanical II test3+ years’ experience with heavy and mobile equipment repairDiesel Certification requiredAir Conditioning Certification or equivalent requiredCaterpillar and Kubota engine repair experience, certifications or education a plus!Hydraulics Systems troubleshooting repair requiredMust understand schematics to troubleshoot 12&24v heavy equipment systemsRequired cutting rig (propylene cutting torch)Valid Drivers’ LicenseComputer literateJoin our team today! To learn more about our company, and to apply online for this exciting opportunity, visit us athttps://careers.cleanharbors.com/Clean Harborsis the leading provider of environmental, energy and industrial services throughout North America. The Company serves a diverse customer base, including a majority of the Fortune 500 companies, thousands of smaller private entities and numerous federal, state, provincial and local governmental agencies. Through its Safety-Kleen subsidiary, Clean Harbors also is a premier provider of used oil recycling and re-refining, parts washers and environmental services for the small quantity generator market. Headquartered in Norwell, Massachusetts, Clean Harbors has waste disposal facilities and service locations throughout the United States and Canada, as well as Mexico and Puerto Rico.We are an equal opportunity in employer to all individuals regardless of race, color, religion, sex, age, national origin, pregnancy, familial status, disability status, veteran status, citizenship status, genetic information or any other characteristic protected under Federal, State or Local law.Clean Harbors is a Military & Veteran friendly company.*CH #LI-MM1

Overview: The Waterproofing division of Beacon Building Products is the largest distributor of high-demand sealants, waterproofing, concrete repair, and fire protection products. Our exceptional culture, employee tenure, and industry reputation are unparalleled. We're expanding our footprint coast-to-coast to numerous locations. Don't miss this chance to work with a dedicated team that delivers top-notch solutions to the construction industry's toughest challenges.Joining Beacon Building Products as a Sales Manager means becoming part of a values-driven organization. Our core principles guide everything we do: putting people first, prioritizing safety, doing what's right, taking pride in our work, continuously improving, and making significant strides towards a more sustainable future. What you will earn:: Competitive Pay with Bonus Eligibility: We make sure that your hard work is recognized.401(k) Match: Take advantage of our employer-matching contributions to help grow your retirement savings.Medical, Dental, and Vision Benefits: Experience the peace of mind that comes with our comprehensive benefits package designed to prioritize your well-being.Employee Assistance Program (EAP): Receive support through personalized care, family services, therapy, legal and financial assistance, and wellness programs.Paid Leave: Our company holidays and paid time off and parental leave programs help employees to recharge, achieve work-life balance, and pursue personal interests.Paid Training and Advancement Opportunities: Open doors to exciting possibilities by engaging in our dynamic learning programs, which include the opportunity to earn valuable certifications.Legal Assistance: Access over 20,000 lawyers and comprehensive legal coverage for home, financial, consumer, auto, family, civil lawsuits, and estate planningsaving you time and legal fees.Protection for Your Finances & Identity: Stay secure with Norton LifeLock, offering identity alerts, credit monitoring, device security, dark web monitoring, parental controls, and more.Pet Insurance: Customize a plan that fits your budget, covering accidents, illnesses, and wellness, with Spot Pet Insurance.#BenB What you will do:: Lead, coach, and develop a team of Outside Sales Representatives to drive profitable above market growth and achievement of monthly/yearly sales and margin budgetsCollaborate with Regional and District leadership to develop sales budgets, pricing strategies, and territory designPromote a culture of high performance, continuous improvement, and teamworkSupport Outside Sales Representatives in building strong relationships with key accountsLead the field execution of sales campaigns and product launchesMaintain effective communication with Branch, Regional, and Executive Leadership to achieve common goals and drive resultsContinuously build market intelligence through local industry associations, events, and vendor relationshipsLeverage business technology and sales data to make informed business decisionsChampion a safety-oriented culture within the organization, ensuring that all employees comprehend and strictly follow safety protocol and procedures What you will bring:: Bachelor's degree with 1-2 years of experience in leadership within the field of salesPrevious operational experience, preferably in building materials, construction, or a related industry preferredSpanish bilingual proficiency a plusProficient analytical and problem-solving skillsStrong business acumen and the ability to contribute strategically at the leadership table

Overview: CONSIDER A CAREER WITH US!COME JOIN THE BEST TEAM OF SERVICE TECHNICIANS!Beck & Masten Buick GMC Gulf Freewayis part of the fast growing Group 1 Automotive, a leader in automotive retail and service. We are growing and looking for Quality Automotive Service Technicians, from Experienced Flag Techs to Entry Level to join our Quality Buick GMC Dealership!Our Service Technicians are passionate about customer service, take pride in their work, an enjoy being part of a winning team that cares about their employees.We offer:Market Leading Pay, Based on Experience, Plus BonusesA Great Working Environment with the Latest EquipmentStructured, Self-pacedand Paid Training Opportunities Leading to Manufacture Certifications and CompanyRecognitionPinnacle Awards ProgramHealth, Dental, V& Vision Insurance Life and Disability Insurance401(k) with company matchPaid Time-offEmployee Vehicle Purchase ProgramEmployee Stock Purchase PlanYou need:A Love of Everything AutomotiveA Positive & Friendly AttitudeGM and ASE Certifications are a Plus!2-3 Years Auto Tech Experience is a Plus!Tools Based on our ExperienceCommunication SkillsBasic Computer SkillsStrong Desire to Provide an Exceptional Client ExperienceAbility to Achieve Targeted GoalsHigh School Diploma or EquivalentMust have a Valid Driver’s LicenseGroup 1 is a Fortune 300 company that owns and operates automotive dealerships and collision centers in the United States and United Kingdom. We offer our associates a team environment, great benefits and ongoing training and support. If you are in alignment with our values of integrity, transparency, professionalism, teamwork and respect - now might be the time for you to accelerate your career as part of the best company in automotive retail. Apply today or refer a qualified friend!*All applicants must pass pre-employment testing to include: background checks, MVR, and drug testing in order to qualify for employment* We are an Equal Employment Opportunity EmployerIND1

Flowserve is a world-leading manufacturer and aftermarket service provider of comprehensive flow control systems. Join a company whose people are committed to building a more sustainable future to make the world better for everyone. With 16,000+ employees in 50+ countries, we combine our global reach with local presence. Our team challenges themselves to approach each situation with ingenuity and creativity to help provide our customers with the most innovative flow control products and services. We support 10,000+ customers worldwide, creating products to meet the needs of our customers who are supplying energy, fresh water, pharmaceuticals and other essentials to consumers, businesses and governments globally. We invite you to put your talents and career in motion at Flowserve. Company Overview: If a culture of excellence, innovation and ownership is what you’re searching for, consider putting your experience in motion at Flowserve. As an individual contributor, or as a leader of people, your enterprise mindset will ensure Flowserve’s position as the global standard in comprehensive flow control solutions. Here, your opportunity for professional development and industry leading rewards will be supported by our foundational commitments to the values of people first, integrity and safety. Thinking beyond opportunity and reward, at Flowserve, we are inspired by working together to create extraordinary flow control solutions to make the world better for everyone! Role Summary: The Machinist will operate a manual lathe and manual mill to machine stainless steel parts and components of flow control valves. The machinist will verify the quality of finished work with precision measurement tools. The Machinist will also operate a VTL. This is a second Shift position: Monday-Friday,4:00pm - 1:00amwith possible overtime during the week or weekend. Responsibilities & Requirements: Inspect first articles and verify the quality of the finished work by using precision measurement tools and demonstrating an in-depth understanding of specifications and quality workmanship.Meet production goals relating to efficiency, schedules, and scrap/rework.Clean and maintain machines and tools and keep an organized workspace.Apply an understanding of the process flow of documents, materials, and parts through the manufacturing process.Work closely with other machinists to discuss and solve problems relating to repairs and equipment.Collaborate with machine shop lead to discuss work-in-progress Preferred Experience / Skills: Experience operating manual lathes and mills (5+ years); Vertical Turning LatheExpertise required in machining 300-series stainless steel and other materials such as Hastelloy C276, Monel 400, Inconel, iron nickel and high chrome alloys.Working knowledge of machine tooling and processing requiredSkill required in using and interpreting precision measuring instruments.Strong blueprint reading skills requiredPersonal commitment to quality workmanship, with an ability to assess and explain quality concern to othersAble to accurately and consistently follow detailed procedures in order.An eye for detail to check drawings, part numbers, and materials, and to correctly complete routers and other paperwork.Work collaboratively as part of a team, showing a professional attitude and a service-oriented mindset in a fast-paced, flexible environment.Demonstrated track record of reliable, on-time attendance, able to work overtime and weekends as required.Standing for long times required, repetitive arm motions, frequent lifting of 25 lbs with occasional lifting up to 50 pounds.Must be able to complete math problems quickly and accurately.High School diploma or equivalent. Flowserve offers competitive pay, annual bonuses, medical benefits on day 1, generous paid vacation time, paid holidays, 401(k) and many other excellent benefits. Req ID : R-13316 Job Family Group : Operations Job Family : OP Machining EOE including Disability/Protected Veterans. Flowserve will also not discriminate against an applicant or employee for inquiring about, discussing or disclosing their pay or, in certain circumstances, the pay of their co-workers. Pay Transparency Nondiscrimination Provision If you are a qualified individual with a disability or a disabled veteran, you have the right to request a reasonable accommodation if you are unable or limited in your ability to use or access flowservecareers. com as result of your disability. You can request a reasonable accommodation by sending an email to employment@flowserve. com. In order to quickly respond to your request, please use the words "Accommodation Request" as your subject line of your email. For more information, read the Accessibility Process.

POSITION OVERVIEW: Guitar Center embodies the world of creativity and music by encouraging staff to find their own individual sound. Our mission is to develop and nurture lifelong musicians and make a difference in the world by enabling musicians and non-musicians alike to experience the joy that comes from creating music. We believe in creating inclusive environments that put our customers first all the while fulfilling our mission.As our Repair Tech (Guitar), you will provide perform maintenance and repair services on customer-owned instruments and to assist in maintenance of specific store inventory, continually building and increasing the business through great customer experience and quality work.A few special characteristics that make our Repair Technicians successful:Customer Focus: Understands customer service principles, and able to provide an excellent customer experience. Able to connect with customers in a meaningful way. Is approachable, genuine, knowledgeable, encouraging, passionate, and committed to helping customers. Able to step in to handle customer service issues.Initiative: Able to identify opportunities & issues and follow through on work activities to capitalize or resolve them. Able to learn quickly and take positive action without being requested to do so. Able to develop knowledge and skills including product, store operations, sales and leadership.Selling: Able to work through GC certification program to gain a base understanding of products and sales techniques.Training: Able to effectively train learners and communicate info and techniques so that they are retained.As our Repair Technician, you will:Interact with customers, ensuring a positive customer experienceService customer-owned instruments with a high level of craftsmanshipMaintain store owned gear, as requestedComplete warranty repair workAdditional duties as assignedWhy Guitar Center Here's just some of the rewards:For our employees who are musicians we offer the unique opportunity of gig leave--take time off to share your music with the world and return to your job after your tour! Guitar Center offers robust benefits and perks, including Medical, Dental, Vision, 401K plus company match, mental health support, paid sick/holiday/vacation time, employee discount program, and tuition reimbursement options.Requirements: Skilled understanding of repairing Guitars Preferences:Foundational product knowledge on Guitar Center products Guitar Center is an Equal Opportunity Employer and provides fair and equal employment opportunity to all employees and applicants regardless of race, color, religion, gender, sexual orientation, gender identity, national origin, age, disability, veteran status or any other protected status prohibited under Federal, State, or local laws. All employment decisions are based on valid job-related requirements.If you are a qualified individual with a disability or a disabled veteran and are unable or limited in your ability to use or access our website, you may request a reasonable accommodation to express interest in a specific opening. You can request reasonable accommodation by calling 1-ext. 2862 or by sending an email to .

SPECIALIZED AIRCRAFT IS OUR SPECIALTYThe Air Force employs hundreds of tactical aircraft to complete our missions, including fighters, strike-fighters and attack planes. It’s the responsibility of Tactical Aircraft Maintenance specialists to ensure that every component of these high-performance aircraft is maintained to the most exacting standards. These experts ensure that the aircraft in their care are ready to fly at a moment’s notice so that pilots can safely and effectively complete their mission.REQUIREMENTSYou must meet several requirements before joining the Air Force. These concern your background, overall health and other standards set by the Air Force, Department of Defense and federal law.Minimum EducationYou must be 17–42 years of age, a U.S. citizen and obtain a qualifying ASVAB score. *High School Students may start their application as early as the end of their junior year. Applicants who are non-graduates or non-alternate credential holders must obtain an AFQT Test score of 65 or higher on the ASVAB. ASVAB Score Requirements47 Mechanical (M)QualificationsKnowledge of principles applying to aircraft systemsNormal color visionCompletion of a current National Agency Check, Local Agency Checks and CreditCompletion of 7.5 weeks of Basic Military TrainingMust be at least 17, but has not reached age 42 on the date of enlistment

We are seeking aMaintenance Helperto support ourLa Porte, TXfacility. The role maintains golf carts and other small machinery and maintains mechanical equipment fluid levels to support the business. Utilizes a general knowledge of mechanical methods and techniques.Why work for Clean Harbors Health and Safety is our #1 priority and we live it 3-6-5Competitive wagesComprehensive health benefits coverage after 30 days of full-time employmentGroup 401K with company matching componentEmployee Stock OptionsPet InsuranceGenerous paid time off, company paid training and tuition reimbursementPositive and safe work environmentsOpportunities for growth and developmentPerform PMs on a variety of different equipmentMakes required repairs and adjustments to equipment fluid levelsBe able to make necessary repairs to carts and buggies and small engines IE: engine replacement, brakes, etcBe able to diagnose electrical systems on carts, buggies and small enginesFuels equipment twice per shiftAble to perform repairs on golf carts/buggies and other equipment as neededMaintains a safe and clean working environmentMaintains tools to be operationalPerform other duties as assigned by immediate supervisorWhat does it take to work at Clean Harbors HS Diploma or Equivalent3+ years maintenance experience in a heady industrial environmentMust pass the Bennett Mechanical Comprehension Test IIAble to perform repairs and diagnose electrical systems on golf carts/buggies and small enginesMust understand schematics to troubleshoot 12&24v systemsDiesel Certification preferredAir Conditioning Certification or equivalent preferredAbility to use a cutting rig (propylene cutting torch)Must be flexible to change direction at a moments noticeComputer literateMust be able to lift up to 50lbs, stand, stoop, bend, crouch, climb and stand for long periodsJoin our team today! To learn more about our company, and to apply online for this exciting opportunity, visit us athttps://careers.cleanharbors.com/Clean Harborsis the leading provider of environmental, energy and industrial services throughout North America. The Company serves a diverse customer base, including a majority of the Fortune 500 companies, thousands of smaller private entities and numerous federal, state, provincial and local governmental agencies. Through its Safety-Kleen subsidiary, Clean Harbors also is a premier provider of used oil recycling and re-refining, parts washers and environmental services for the small quantity generator market. Headquartered in Norwell, Massachusetts, Clean Harbors has waste disposal facilities and service locations throughout the United States and Canada, as well as Mexico and Puerto Rico.We are an equal opportunity in employerto all individuals regardless of race, color, religion, sex, age, national origin, pregnancy, familial status, disability status, veteran status, citizenship status, genetic information or any other characteristic protected under Federal, State or Local law.Clean Harbors is a Military & Veteran friendly company.*CH #LI-MM1