Please Accept our Privacy Policy
Applied Metallurgical
Longview, TX • (5.2 miles) • Full Time • $16.50 to $17.50 / hr • 10/20/2026
Applied Metallurgical is seeking a dependable, hardworking Molding Team Member to help produce the molds used to manufacture iron castings. This entry-level position offers hands-on training and room to take on greater responsibility as your skills develop. No prior foundry experience is required. Bring a willingness to learn, a strong work ethic and a commitment to working safely. Job Duties Include: Prepare patterns, flasks, and molding equipment for production. Assist with filling, compacting, and preparing sand molds. Apply mold coatings and perform finishing work according to established procedures. Position cores and assist with assembling and closing molds. Inspect molds for damage or defects before pouring. Stage completed molds and materials to support the production schedule. Kee
Applied Metallurgical
Gilmer, TX 75644 • (16.3 miles) • Full Time • $16.50 to $17.50 / hr • 10/20/2026
Applied Metallurgical is seeking a dependable, hardworking Molding Team Member to help produce the molds used to manufacture iron castings. This entry-level position offers hands-on training and room to take on greater responsibility as your skills develop. No prior foundry experience is required. Bring a willingness to learn, a strong work ethic and a commitment to working safely. Job Duties Include: Prepare patterns, flasks, and molding equipment for production. Assist with filling, compacting, and preparing sand molds. Apply mold coatings and perform finishing work according to established procedures. Position cores and assist with assembling and closing molds. Inspect molds for damage or defects before pouring. Stage completed molds and materials to support the production schedule. Kee
Applied Metallurgical
Longview, TX • (5.2 miles) • Full Time • $16.50 to $18.50 / hr • 10/20/2026
Applied Metallurgical is looking for a Melt Technician who’s not afraid of hard work and heat. This is a hands-on role working directly with molten metal, induction furnaces and heavy equipment to keep production moving safely and efficiently. All safety wear is provided. Job Duties Include: Work with the plant metallurgist to build and charge melts Weigh alloys and scrap for furnace charges Run coreless induction furnaces, pumps, and cooling systems Take molten metal samples and pour heats using overhead cranes Repair and maintain refractory in furnaces and ladles Qualifications: Forklift certification or experience Bobcat / skid-steer experience preferred Safety-first mindset with experience around molten metal Solid math skills for charge calculations Comfortable using hand tools
Applied Metallurgical
Gilmer, TX 75644 • (16.3 miles) • Full Time • $16.50 to $18.50 / hr • 10/20/2026
Applied Metallurgical is looking for a Melt Technician who’s not afraid of hard work and heat. This is a hands-on role working directly with molten metal, induction furnaces and heavy equipment to keep production moving safely and efficiently. All safety wear is provided. Job Duties Include: Work with the plant metallurgist to build and charge melts Weigh alloys and scrap for furnace charges Run coreless induction furnaces, pumps, and cooling systems Take molten metal samples and pour heats using overhead cranes Repair and maintain refractory in furnaces and ladles Qualifications: Forklift certification or experience Bobcat / skid-steer experience preferred Safety-first mindset with experience around molten metal Solid math skills for charge calculations Comfortable using hand tools
Applied Metallurgical
Longview, TX • (5.2 miles) • Full Time • $25.00 / hr • 10/20/2026
Applied Metallurgical is expanding and looking for experienced Electrical/Mechanical Maintenance Technicians to join our steel foundry team. This is a hands-on position for someone who enjoys troubleshooting equipment, making repairs, and working on a wide variety of electrical and mechanical systems. You’ll play an important role in keeping plant equipment operating safely, reliably, and efficiently. Job Duties Include: Troubleshoot and maintain single-phase and three-phase motors Work with low-voltage control systems and motor starters Troubleshoot and maintain pumps and cooling systems Diagnose electrical issues involving compressors, cranes, cooling towers and bucket elevators Install and maintain electrical conduit Work with compressed air and water plumbing systems Perform weld
Applied Metallurgical
Gilmer, TX 75644 • (16.3 miles) • Full Time • $25.00 / hr • 10/20/2026
Applied Metallurgical is expanding and looking for experienced Electrical/Mechanical Maintenance Technicians to join our steel foundry team. This is a hands-on position for someone who enjoys troubleshooting equipment, making repairs, and working on a wide variety of electrical and mechanical systems. You’ll play an important role in keeping plant equipment operating safely, reliably, and efficiently. Job Duties Include: Troubleshoot and maintain single-phase and three-phase motors Work with low-voltage control systems and motor starters Troubleshoot and maintain pumps and cooling systems Diagnose electrical issues involving compressors, cranes, cooling towers and bucket elevators Install and maintain electrical conduit Work with compressed air and water plumbing systems Perform weld
Applied Metallurgical
Longview, TX • (5.2 miles) • Full Time • $16.00 / hr • 10/7/2026
Applied Metallurgical is seeking a dependable, detail-oriented Grinding Team Member to join our foundry’s cleaning and finishing department. You’ll learn to remove excess metal and finish iron castings in preparation for inspection, machining, and other production steps. No prior foundry experience is required. We’re looking for someone who takes pride in hands-on work, follows instructions, and wants to grow their manufacturing skills. What You’ll Do: Use grinders and finishing tools to remove flash, parting lines, and remaining gate and riser material. Follow finishing standards while preserving the casting’s shape and required surfaces. Inspect castings for visible defects and report quality concerns. Check tools, guards, and abrasives before use and report
Applied Metallurgical
Gilmer, TX 75644 • (16.3 miles) • Full Time • $16.00 / hr • 10/7/2026
Applied Metallurgical is seeking a dependable, detail-oriented Grinding Team Member to join our foundry’s cleaning and finishing department. You’ll learn to remove excess metal and finish iron castings in preparation for inspection, machining, and other production steps. No prior foundry experience is required. We’re looking for someone who takes pride in hands-on work, follows instructions, and wants to grow their manufacturing skills. What You’ll Do: Use grinders and finishing tools to remove flash, parting lines, and remaining gate and riser material. Follow finishing standards while preserving the casting’s shape and required surfaces. Inspect castings for visible defects and report quality concerns. Check tools, guards, and abrasives before use and report
Applied Metallurgical
Longview, TX • (5.2 miles) • Part Time • $30.00 to $40.00 / hr • 9/22/2026
Applied Metallurgical is expanding and looking for experienced part-time Industrial Painters to paint manufactured cast iron components. This is a great opportunity for a skilled painter looking for consistent supplemental income with a limited weekly commitment. You'll handle the painting process from setup and surface preparation through spraying, inspection, cleanup, and equipment storage. Schedule: 2 sessions per week, approximately 4 hours each Job Duties Include: Prepare and stage parts for painting Operate a Graco airless spray system Mix and apply coatings according to specifications Inspect finishes and complete touch-ups Clean and maintain spray equipment Keep the work area clean and organized Follow all safety, PPE, coating-handling, and waste-disposal procedures Benefits: Only
Applied Metallurgical
Gilmer, TX 75644 • (16.3 miles) • Part Time • $30.00 to $40.00 / hr • 9/22/2026
Applied Metallurgical is expanding and looking for experienced part-time Industrial Painters to paint manufactured cast iron components. This is a great opportunity for a skilled painter looking for consistent supplemental income with a limited weekly commitment. You'll handle the painting process from setup and surface preparation through spraying, inspection, cleanup, and equipment storage. Schedule: 2 sessions per week, approximately 4 hours each Job Duties Include: Prepare and stage parts for painting Operate a Graco airless spray system Mix and apply coatings according to specifications Inspect finishes and complete touch-ups Clean and maintain spray equipment Keep the work area clean and organized Follow all safety, PPE, coating-handling, and waste-disposal procedures Benefits: Only
Applied Metallurgical
Longview, TX • (5.2 miles) • Full Time • $16.50 to $18.50 / hr • 9/22/2026
Applied Metallurgical is expanding and looking for a dependable, hands-on CNC Machine Shop Assistant to join our Foundry and Machine Shop team. This is an entry-level opportunity for someone who wants to learn, work with their hands, and build valuable skills in a precision machine shop. You’ll work alongside experienced machinists and CNC operators while learning how parts are prepared, machines are set up, and quality products are produced. Job Duties Include: Assist experienced CNC operators and machinists with daily shop activities Prepare and move materials and parts Help with machine setup and production Load and unload parts from machines Inspect finished parts and perform basic quality checks Help keep machines, tools, and work areas clean and organized Assist with basic mach
Applied Metallurgical
Gilmer, TX 75644 • (16.3 miles) • Full Time • $16.50 to $18.50 / hr • 9/22/2026
Applied Metallurgical is expanding and looking for a dependable, hands-on CNC Machine Shop Assistant to join our Foundry and Machine Shop team. This is an entry-level opportunity for someone who wants to learn, work with their hands, and build valuable skills in a precision machine shop. You’ll work alongside experienced machinists and CNC operators while learning how parts are prepared, machines are set up, and quality products are produced. Job Duties Include: Assist experienced CNC operators and machinists with daily shop activities Prepare and move materials and parts Help with machine setup and production Load and unload parts from machines Inspect finished parts and perform basic quality checks Help keep machines, tools, and work areas clean and organized Assist with basic machDXP
Longview, TX • (3.9 miles) • Full Time • 11/16/2026
Do you want to grow with us?At DXP we arepassionateabout what we do and driven to be the best solution for our industrial customers. Since 1908 DXP has been dedicated to thehighest qualityof customer service through our expertise of the products we distribute and the technical services we perform with a sense of individual pride and company spirit. Throughout your career with DXP, we willencourageandempoweryou to take an active role in identifying and driving your development, so you feel total confidence in your ability to achieve ongoing success. We aspire to be thebest solutionfor the Industrial customers' needs for MROP products and services through our Innovative Pumping Solutions, Metal Working, Supply Chain Services and Service Centers. Check out our many videos to learn more!http:/RNR Tire Express
Longview, TX 75603 • (10 miles) • Full Time • 11/15/2026
Description: RNR Tire Express is a national franchise retailer that provides safe, quality tires and wheels with affordable payment options. At RNR we have built a culture around “SERVING our customer and not just providing them customer service”. We support and empower our employees with excellent training and tools which enables them to provide our customers with a unique and exceptional experience. RNR Tire Express started as a family business over 20 years ago in a small shop located in Tampa, Florida. Since then, we have grown to over 160 stores across 26 states, and continue to open more locations across the country each year. While we have expanded far beyond that little shop in Tampa, we have never lost our core value of FAMILY . At RNR, we believe having a healthy work / life balaFresh & Ready Foods
Longview, TX 75605 • (8.2 miles) • Full Time • 11/14/2026
Position Title: QUALITY ASSURANCE SPECIALIST Location: Onsite in Longview, TX Salary: $60,000 - $80,000 Other Forms of Compensation: None Growth. Opportunity. Excellence. Fresh & Ready Food Group is a member of Canteen. Canteen sets the national standard for excellence in automated retail, and EVERY segment of our business is thriving.We employ the best team in the industry and their dedication, collaboration and passion fuel our growth . YOU bring enthusiasm, customer service, and commitment; we’ll supply the opportunity and innovation. TOGETHER we’ll continue transforming the micro-market, dining, coffee, and vending industry. Come grow with us. We are Canteen. This position is eligible for an Employee Referral Bonus! If you know someone that is qualified for this role, please use the ‘jChain Electric Co Inc
Henderson, TX • (24.7 miles) • Full Time • 11/14/2026
Description: POSITION SUMMARY The Foreman of a crew is responsible for overseeing the construction, maintenance and operation of electrical systems, to ensure assigned projects are completed in accordance with design, budget, schedule and safety considerations. Reasonable Accommodations Statement To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. Reasonable Accommodations may be made to enable qualified individuals with disabilities to perform the essential functions. Requirements: ESSENTIAL FUNCTIONS Provide leadership and direction to crews to ensure safe, efficient, and quality operations. Work with GF in estimating worker requirements, equipment and material, and develop “look ahead” schedules. Ensure crew follows GF’s schedule oEnpro
Longview, TX • (3.9 miles) • Full Time • 11/14/2026
Job Title: Product Technician I – Rubber Molding Job Code: 809003 – Prod Tech II Reports to: Operations Supervisor Segment: Seal Division: STEMCO Site Name: Longview Employee Type: Regular Full Time FLSA Status: Non-Exempt EEO-1 Job Category: Operators Remote, Hybrid, Onsite: Onsite The Product Technician I – Rubber Molding role is responsible for supporting day-to-day production operations within the Rubber Molding department. This role is an integral part of a high-performing production team and is expected to operate molding equipment, follow standard work, and ensure product quality through effective inspection and defect detection. This position requires a strong commitment to safe work practices, quality standards, and continuous improvement, while contributing to a collaborative andExpress Employment Professionals - Tyler
Overton, TX 75684 • (17.8 miles) • Full Time • $20.00 to $28.00 / hr • 11/14/2026
Shape precision. Power production. Step into a role where your craftsmanship drives quality. As a CNC Precision Machining Technician, you’ll convert drawings and CAD models into accurate parts, keep machines running at peak performance, and uphold rigorous quality standards. A day in your work boots You arrive, pull up the day’s blueprints, and map out your setups. You select tooling, load programs, and dial in offsets. As parts run, you monitor feeds and speeds, listening and watching for anything that needs adjustment. You verify dimensions with micrometers and calipers, troubleshoot small issues before they become big ones, and partner with engineers and teammates to make the next run even better. You wrap by cleaning your station and locking in a safe, organized workspace for tomorrow’DNC Facility Services
Carthage, TX 75633 • (41.7 miles) • Full Time • $18.00 / hr • 11/14/2026
$18/hr - $22/hrTraining & Quality Specialist (Janitorial QC / Field Trainer) DNC Facility Services · Full-time · $18/hr - $22/hr · Ark-La-Tex area, travel between sites required Schedule: Monday–Friday, evening shift (2:00–10:30 PM) Weekends off. Why This Job Is Different Love teaching people how to do it right? Tired of being the one who covers every call-out? This one's for you. DNC Facility Services has been cleaning commercial buildings since 1982, and we're growing fast. We just built a brand-new training standard, and we need someone to bring it to life across every site we clean. This isn't a cleaning job, and it's not a fill-in role. You'll be the person who trains our trainers. You'll certify our Team Leads and senior techs, coach them in the field, and make sure every new hire atAlfred H Knight Group
Longview, TX • (3.9 miles) • Full Time • 11/13/2026
WHAT IS ON OFFER Alfred H Knight has an opportunity for a General Inspector to work with our Inspection team, based in the Longview, Texas area. You will be responsible for ensuring client instructions are carried out at agreed consignment locations, acting as an independent party to verify compliance with agreed processes and inspection and supervision procedures and providing details to clients regarding the handling of their product/s. ABOUT US Alfred H Knight is a totally independent, family owned business spanning five generations. A global network of strategically placed offices and laboratories enable global trade by providing independent inspection, analysis and consultancy services to the metals and minerals, solid fuels and agriculture industries. We have honed & carefully crafteApex Geotech Drilling
Kilgore, TX 75662 • (9.6 miles) • Full Time • $20.00 to $24.00 / hr • 11/13/2026
Are you the expert we’re looking for?\n \n Can you translate blueprints for geotechnical and drilling equipment into precise toolpaths? \n Do you thrive on complex setupsfixturing, tooling choices, and offsetsthat make ±0.001" accuracy routine? \n Will you mentor teammates while keeping production moving and quality uncompromised? \n \n\n The work\n \n Program CNC machines via G-code and/or CAM \n Set up machines for complex parts, including fixtures, tooling, and offsets \n Cut steel, aluminum, and specialty alloys to tight tolerances \n Inspect parts to print and document results \n Troubleshoot issues and implement corrective actions \n Guide CNC Operators and Assistants to build capability \n Maintain accurate production and inspection records \n \n\n What you must bring\n \n High schoAmerican Industrial Transport
Longview, TX 75604 • (0 miles) • Full Time • $26.44 to $29.81 / hr • 11/12/2026
Job Summary Entry-level Quality Inspector training for performing basic in-process and final inspections under supervision while developing knowledge of AAR, FRA, customer, and company requirements. Job Duties Inspection Activities Train to Perform assigned in-process inspections. Train to Perform assigned final inspections. Train to Verify work completed meets work order requirements. Train to Verify required repair procedures were followed. Train to Inspect repaired railcars for obvious defects and non-conformances. Train to Complete inspection documentation accurately and legibly. Train to Verify required forms are complete before railcar release. Quality Documentation Train to Complete inspection reports. Train to Record defects and discrepancies. Train to Maintain inspection records.Conterra Ultra Broadband
Longview, TX 75601 • (6.1 miles) • Full Time • 11/12/2026
Outside Plant Tech I Job Type: Full Time DUTIES AND RESPONSIBILITIES: • Assist in the day-to-day tasks associated with outside plant fiber network deployment and operations, including construction management, progress reporting, maintenance and record keeping. • Assist in preparation and splicing of fiber enclosures, fiber panels, bonds/grounds and test fiber optic equipment to division standards. • Assist in Perform ring cuts, butt-splices, enter splice cases on live fiber without affecting existing services; both aerial and underground • Help perform fiber tests with OTDR’s, visible light source and meters. • Assist in the installation of fiber optic communication equipment and Inside plant patch panels. • Install aerial and underground enclosures and other fiber related telecom equipmenGRAYWOLF INTEGRATED CONSTRUCTION COMPANY
Hallsville, TX 75650 • (16.1 miles) • Full Time • 11/12/2026
GrayWolf is seeking a Project Controls Engineer in Hallsville, TX - This is an On-Site Role with Competitive Pay, Paid Time Off, Per Diem Eligible >60-miles GrayWolf is a heavy industrial/commercial construction contractor that provides end-to-end solutions from design, fabrication, construction, and facility management with a footprint that is nationwide. With more than 45-years of experience in the industry, we have strong leadership and support teams who understand field servant leadership is the key to our success. We are continually BUILDING new talent while developing our current talent. As our assignments vary in duration and locations, we provide a safe and ethical environment and offer a competitive wage and benefit program. We strive to be the best contractor with demonstrating aHeaton Eye Associates
Longview, TX • (3.9 miles) • Full Time • 11/12/2026
Job Summary: \n Provides individualized and specialized nursing care to patients in the ambulatory surgery center (ASC) in accordance with physician’s orders, recognized nursing standards, legal aspects of current nurse practice within the state, federal, and the ASC’s policies and procedures. Functions cooperatively with physicians and staff exhibiting teamwork characteristics. Demonstrate initiative, insight and judgment in decision-making process. \n About the Practice: \n The physicians of Heaton Eye Associates have been serving East Texas’ vision needs for over 40 years. We offer state-of-the-art technology with special services ranging from primary eye care to world-class laser surgery. Our physicians were the first to offer LASIK laser vision correction in East Texas and have perforLEGIT PRODUCTIONS LLC
Longview, TX 75601 • (6.1 miles) • Full Time • $1,200 to $6,000 / mo • 11/12/2026
Benefits: Opportunity for advancement Training & development LEGIT PRODUCTIONS LLCTexas Division PIT Crew (Production Intake Team) About the PIT Crew The Production Intake Team (PIT Crew) is the creative and operational support team within Legit Productions LLC. PIT Crew members help transform opportunities generated by our Client Sourcing Agents (CSAs) and Division leadership into organized, professional production projects. As Legit Productions continues expanding across multiple markets, the PIT Crew plays an important role in helping us maintain quality, organization, creativity, and professionalism as our project volume increases. This is an opportunity for creatives and production-minded professionals who want to grow with an expanding media company and potentially take on greater reCommunications And Power Industries LLC
Kilgore, TX 75662 • (9.6 miles) • Full Time • 11/12/2026
The Radio Frequency (RF) Engineering Technician II supports engineering teams in the design, build, integration, test, and modification of satellite communications systems and associated electromechanical hardware . This role operates in a hands-on lab and production environment, working from schematics, drawings, and documented procedures to support prototype and production-level systems. This position is ideal for a technician with strong fundamentals across electrical, mechanical, and test disciplines who is ready to operate in a regulated Aerospace & Defense environment . YOUR DAY TO DAY INCLUDES: Support engineering activities including design support, test, checkout, modification, fabrication, and assembly of prototype and production electromechanical systems. Build, troubleshoot, teApex GeoTech Solutions
Kilgore, TX 75662 • (9.6 miles) • Full Time • $55,000 to $85,000 / yr • 11/11/2026
Description: POSITION SUMMARY Great Opportunity! Supports quality operations by performing inspections, maintaining quality records, and assisting with non-conformance documentation and supplier quality activities. ESSENTIAL DUTIES & RESPONSIBILITIES Perform dimensional and visual inspections on incoming, in-process, and finished parts Record inspection results in quality records and ERP system Identify and tag non-conforming material and initiate NCR documentation Assist with first article inspections (FAI) and qualification testing Support internal and customer quality audits Maintain calibrated measuring equipment and calibration records Assist Quality Manager with data entry, reporting, and filing Requirements: REQUIRED QUALIFICATIONS High school diploma or GED 2+ years inspection or qTyler Pipe & Coupling
Tyler, TX • (30.9 miles) • Full Time • 11/8/2026
Company Description Location: Tyler, TX Pay: Pay Rate $30.71/hour Shift: 5:00 AM - 3:00 PM; Monday - Thrusday The Pipe Mold CNC Journeyman Machinist is responsible for setting up, operating, and optimizing a variety of CNC machine tools, including lathes and milling machines, to manufacture precision machine parts and related components. This position requires advanced machining knowledge, the ability to interpret technical drawings and specifications, and expertise in CNC program adjustments to ensure quality, efficiency, and productivity. The role also supports machine shop scheduling, tooling selection, and operator training while maintaining the highest standards of safety and workmanship. Job Description Set up, operate, optimize, and modify CNC lathes, mills, and related equipment toE Tech Group
Longview, TX • (3.9 miles) • Full Time • 11/6/2026
At E Tech Group, joining our team means joining a group of passionate and forward-thinkingexperts. We're one of the largest engineering and system integration firms in the United States providing value for our clients through IT automation and control solutions for more than 30years to the Life Sciences, Mission Critical, Metals & Mining, Warehousing & Distribution, and CPG/Food & Beverage industries.Our national and global scaleallows us to help our clients develop and implement standardized solutions at any of their facilities regardless of physical location or the local resources available at that site. We are seeking an enthusiastic and experienced Automation Engineer tobe responsible for leading or contributing to detailed hardware and software design of process automation control sysVolkert Inc
Tyler, TX 75702 • (30 miles) • Full Time • 11/6/2026
Are we the road to your future? We are currently searching for a Junior level and Senior level CAD Technician to support our Southwest Region located in Austin, Houston, McKinney, Rockwall, Round Rock, San Antonio, or Tyler, TX . The ideal candidate will be responsible for coordination and oversight of geometric design projects. What you’ll be doing: Provide assistance to engineers using OpenRoads Designer to create roadway plan sets and perform minor design work on roadway projects Contribute to project production sheets by adding dimensions and laying out plans, title and detail sheets on production sets of plans Prepare minor mathematical calculations and quantity calculations for roadway/bridge projects Work with engineers to develop 3D models using both OpenRoads Designer Research appPlaymate Preschools LLC
Tyler, TX • (30.9 miles) • Full Time • $18.00 to $25.00 / hr • 11/4/2026
Role Overview Candidate must understand SMT terminology. This person must be knowledgeable of SMT components types and their package size. The operator should be experienced with the total SMT process from set-up, feeders, programming knowledge, stencil, manual and automated printing, solder paste, and reflow ovens. Skills include a comprehensive understanding of IPC standards. Key Responsibilities The SMT operator will run and maintain the SMT equipment (paste printer, pick and place,reflow). Operator will also be expected to program jobs. Job Description: Duties include operating, maintenance, and any associated tasks related to SMT. Responsibilities will vary and it is expected this individual will be ableto operate and maintain equipment other than SMT equipment. This person must be caTyler Building Systems
Tyler, TX 75707 • (24.6 miles) • Full Time • 11/3/2026
Entry Level Designer / Draftsman Tyler Building Systems, Tyler, Texas (Headquartered in Tyler, TX – Manufacturing custom metal building systems since 1968) About Tyler Building Systems: Tyler Building Systems is a leading manufacturer of high-quality, custom-engineered metal building systems. From commercial warehouses and industrial facilities to churches, recreational spaces, retail buildings, and agricultural structures, we deliver durable, tailored solutions built with American-made steel right here in Texas. We're committed to providing exceptional value, personal service, and reliable expertise for every project. Position Overview: We are currently seeking motivated Entry-Level Designers/Draftsmen for full-time positions on our design and drafting team. This is an outstanding opportuSecond Generation Arc N Spark Welding
Tyler, TX 75706-6031 • (30.9 miles) • Full Time • $21.00 to $23.00 / hr • 11/3/2026
The role of the Advanced Millwright is to actively assist in work on mechanical projects. When not involved in field installation projects, this position will be involved in day-to-day shop fabrication activities required by Arc N Spark. This position will require advanced skill and knowledge of all mechanical tenants and possess a good understanding of how to read blueprint drawings and specifications. This position will be involved in basic cutting, grinding, fitting and welding on a daily basis. Successful candidate must be able to efficiently communicate and collaborate with all Arc N Spark entities. Attention!!! This position is REQUIRED to work weekends. There will be multiple positions hired from this posting. Minimum Qualifications: Must be able to complete all job positions belowHotRun Inc.
Longview, TX • (3.9 miles) • Full Time • $90,000 to $115,000 / yr • 11/2/2026
Are you and experienced quality engineer who would like to work for a global supplier of medical devices that is just over an hour outside of Dallas TX and offers very competitive salary, benefits, bonus and relocation assistance if required. Thispositionwillberesponsibleforthequalityprocessincludingcriticalprocesscharacteristics,standards, audits, complaint resolutions, training and laboratory functions related to FDA 21 CFR 820, FSSC22000, and ISO13485:2016. Ensure integration of quality systems to ensure a common quality system throughout the facility and share best practices across the North American plant locations. Provide manufacturing personnel with quality systems and tools to allow effective evaluation of products and processes. Ensure the application of advanced quality tools toSnelling Tyler
Tyler, TX 75706 • (27.9 miles) • Full Time • 11/2/2026
SNELLING is currently recruiting for a CNC Programmer a manufacturing company in the Tyler area with a pay rate of $25.00/hr – $36.00/hr. Schedule is Monday–Friday during standard day shift hours. We are seeking an independent proactive CNC Programmer to create, prove out, and optimize CNC programs using Mastercam and SolidWorks. This role also involves selecting tooling, generating first-article parts, and providing cost estimates for customer quotes. Key Responsibilities: Create CNC programs from engineering prints using Mastercam and SolidWorks. Generate and prove out first-article part machining to ensure quality and accuracy. Identify and recommend appropriate tooling for each job, utilizing existing inventory or suggesting new tooling. Provide cost estimates to support accurate custoTopp's Pizza
Tyler, TX 75707 • (24.6 miles) • Part Time • $10.00 to $13.00 / hr • 11/1/2026
Responsibilities: Accurately take orders over the phone and at the front counter. Efficiently operate the cash register and handle transactions. Read and fill orders correctly, ensuring customers satisfaction. Maintain cleanliness in the store at all times, adhering to health and safety standards. Contribute to a fast-paced environment by staying proactive and finding tasks to complete during slower periods.INTEGRITY SERVICES TX LLC
Gilmer, TX 75645-7877 • (16.5 miles) • Full Time • 10/31/2026
About Company: Integrity Services TX LLC is a trusted, Texas-based oilfield service company built on hard work, reliability, and doing the job right the first time. We provide a full range of field services to the upstream and midstream energy sectors across Texas and the surrounding region.Our core services include: General oilfield construction and support Roustabout crews and facility maintenance Right-of-way (ROW) clearing and reclamation Pipeline installation, maintenance, and integrity work Dirt construction – lease roads, location pads, reserve pits, containment ponds, and commercial site prep Excavation, grading, and heavy equipment operations Founded and still operated with a strong emphasis on safety, quality, and customer relationships, Integrity Services TX has earned a reputatPrysmian Group
Scottsville, TX 75688 • (34.3 miles) • Full Time • 10/31/2026
Prysmian is the global leader in energy and telecom cable systems. Every year, we manufacture thousands of miles of underground and submarine cables for power transmission and distribution, as well as medium and low voltage cables for construction and infrastructure. We also produce a full range of optical fibers, copper cables, and connectivity solutions for voice, video, and data transmission. With over 30,000 employees across 50+ countries , Prysmian is transforming how the world connects and powers its future. At every level, our people are empowered to make an impact. Join us and Make Your Mark . Lead Transformation at a Global Industry Leader: Prysmian, the world’s largest manufacturer of energy and telecom cables, is seeking a seasoned executive to lead our largest manufacturing facWest Fraser, Inc
Henderson, TX 75652 • (20.5 miles) • Full Time • $25.82 / hr • 10/30/2026
Our Millwrights are a key player in a company-wide continuous improvement effort through daily use of troubleshooting, and predictive and preventative maintenance strategies. As a member of this high performing team, you will be responsible for being a team player and working safely with all machinery within the mill. What you will do: Repair and maintain industrial equipment to include conveying systems, major machine centers such as debarkers, canters, gang saws, and edgers Perform preventative maintenance on equipment to ensure "Just in time" maintenance Move machinery and equipment, using hoists, dollies, rollers, and trucks Adjust tension on nuts and bolts, or position parts, using hand tools and measuring instruments, to set specified clearances between moving and stationary parts AlPneumatech Safety Systems, Inc.
Flint, TX 75762 • (39.6 miles) • Full Time • $18.00 to $20.00 / hr • 10/29/2026
Job Description Instrumentation and Controls Technician in the upstream and midstream oil & gas industry. This position will be responsible for safely and promptly performing tasks involved with day-to-day maintenance and support of pneumatic systems in order to minimize or resolve downtime. In addition, it requires preventive maintenance skills and the ability to construct pneumatic systems from start to finish. We are asking for the applicant to be local to the East Texas area. Roles & Responsibilities Support I&C Techs and learn all processes and procedures to become I&C Technician. Meet all Safety training requirements need to meet customers safety requirements Learn to maintain equipment and vehicles provided by Pneumatech and keep in good operational condition. Ensuring safety in the