Pay starts at $18.00 an hour and goes up depending on experience.
Our ideal candidate should have previous experience as a mechanic/technician in the trailer industry. Carpentry, welding and mechanic skills are a plus. We are looking for a self-motivated person with strong work ethics. We are willing to train the right applicant.
Duties will include: Read and understand the jobs and work order per company standards Preventative maintenance and repair all systems on Semi-Trailers to meet the standards set forth by DOT Remove and replace brakes, brake drums, hubs, seals, bearings, races and associated parts Repair electrical and lighting systems Repair or replace chassis components such as springs, spring hangers, equalizers, complete slider assemblies, axles, and sub frames Repair mud flap brackets and dolly leg assembles Repair or replace flooring, rub rails, doors and door trim Repair roofs, panels, nose panels, lower and upper rails Conform to all safety and health standards Assist fellow mechanic technicians
Benefits: Paid time off Paid holidays 401 Medical, Dental, Vision Life Insurance Long and Short Term Disability
Requirements: 1 - 3 years of experience in trailer repair or equivalent experience with welding, carpentry, and mechanic skills Valid driver’s license with a safe driving record. Must furnish own basic hand tools. Ability to stand, walk, bend, crouch, stoop, reach, stretch, step, climb, and / or sit frequently and lift heavy (up to 60lb) throughout the duration of the day Ability to work independently with minimal supervision Attention to detail and highly organized

The Quality Control Shop Floor Inspector will be responsible for inspecting welding quality and performing dimensional inspections on ASME code pressure vessels, ensuring all products meet strict industry and company standards. The ideal candidate will be efficient, detail-oriented, and have a thorough understanding of ASME code and welding techniques.
Key Responsibilities: Perform visual and dimensional inspections of welded and fabricated components, ensuring compliance with ASME code standards. Inspect welds for defects such as cracks, porosity, and misalignment, ensuring all welds meet quality specifications. Conduct dimensional checks of equipment, ensuring compliance with design specifications and blueprints. Record and report inspection results accurately, identifying non-conformities and recommending corrective actions when needed. Work closely with production teams to resolve quality issues and ensure consistent adherence to quality standards. Maintain up-to-date knowledge of ASME code requirements, welding techniques, and industry best practices. Participate in continuous improvement efforts to enhance quality control processes and procedures.
Schedule: 10 hour shift Monday to Friday Weekends as needed Expected hours: 50-60 per week
Benefits: Paid time off Overtime
Qualifications: High school diploma or equivalent required; relevant technical certifications preferred. Background in welding or fitting. Minimum of 3 years of experience in quality control, welding inspection, or a similar role in an ASME code fabrication environment. Strong knowledge of ASME code requirements and welding standards. Proficiency in reading and interpreting blueprints, technical drawings, and welding symbols. Experience with inspection tools and equipment such as micrometers, calipers, and other precision measuring instruments. Excellent attention to detail and problem-solving skills. Strong communication and teamwork skills.
Preferred Qualifications: Certification in welding inspection (e.g., AWS CWI) or quality control is highly desirable. Familiarity with Non-Destructive Testing (NDT) methods is a plus.

At GCAW, we offer a dynamic work environment where you can leverage your skills and experience to lead high-impact projects. As part of our team, you will contribute to meaningful work in a supportive environment that values integrity, precision, and teamwork.
We are seeking an experienced Project Manager to oversee and coordinate the successful execution of pressure vessel fabrication projects. The ideal candidate will manage customer communication, purchasing, scheduling, and project progress to ensure timely and efficient completion.
Key Responsibilities: Customer Communication: Serve as the primary point of contact for clients, addressing their needs and ensuring project specifications are met. Purchasing Materials: Source and order required materials, ensuring compliance with project timelines and budget constraints. Scheduling: Draft, update, and maintain project schedules, coordinating all phases from initiation to completion. Monitor Project Progress: Track progress on fabrication and ensure milestones are met while maintaining quality standards. Coordinate Teams: Work closely with shop personnel, engineers, and subcontractors to ensure seamless project execution. Problem-Solving: Identify potential project delays or issues and proactively work on solutions. Documentation: Maintain accurate project records and ensure all documentation complies with ASME code requirements.
Benefits: Compensation Package: Bonus opportunities Hourly pay Overtime pay
Schedule: 10 hour shift Monday to Friday Overtime Weekends as needed
Qualifications: Minimum of 5 years of industry experience, preferably in pressure vessel fabrication or a related field. Knowledge of the ASME code is required. Previous experience with welding or machining is preferred. Strong organizational skills and the ability to manage multiple projects simultaneously. Excellent communication skills, both written and verbal. Proficiency in project management software and tools.
Experience: ASME codes & standards: 3 years Project management: 5 years Organizational skills: 5 years

Pay starts at $18.00 an hour and goes up depending on experience.
Our ideal candidate should have previous experience as a mechanic/technician in the trailer industry. Carpentry, welding and mechanic skills are a plus. We are looking for a self-motivated person with strong work ethics. We are willing to train the right applicant.
Duties will include: Read and understand the jobs and work order per company standards Preventative maintenance and repair all systems on Semi-Trailers to meet the standards set forth by DOT Remove and replace brakes, brake drums, hubs, seals, bearings, races and associated parts Repair electrical and lighting systems Repair or replace chassis components such as springs, spring hangers, equalizers, complete slider assemblies, axles, and sub frames Repair mud flap brackets and dolly leg assembles Repair or replace flooring, rub rails, doors and door trim Repair roofs, panels, nose panels, lower and upper rails Conform to all safety and health standards Assist fellow mechanic technicians
Benefits: Paid time off Paid holidays 401 Medical, Dental, Vision Life Insurance Long and Short Term Disability
Requirements: 1 - 3 years of experience in trailer repair or equivalent experience with welding, carpentry, and mechanic skills Valid driver’s license with a safe driving record. Must furnish own basic hand tools. Ability to stand, walk, bend, crouch, stoop, reach, stretch, step, climb, and / or sit frequently and lift heavy (up to 60lb) throughout the duration of the day Ability to work independently with minimal supervision Attention to detail and highly organized

Clayton Oilfield Services, an oil and gas industry transportation service, is looking for Winch/Lowboy Truck Drivers with oilfield experience. We provide reliable transportation services such as rig moving and heavy hauling of various oilfield related equipment for companies in the oil and gas industry.
Benefits: Work out of Houston Balanced Home and Road Life Regular Hours
Qualifications: Must have 5 years oilfield experience Valid Class A CDL Winch Truck/Lowboy experience Heavy Haul Experience

Spend your Summer getting paid to be at the pool! We hire and train Lifeguards to work at private residential community pools. NO Experience necessary! We Teach Red Cross Lifeguard certification classes.
Benefits: We Pay Overtime! NO Split shifts that make it hard to get hours. NO Late nights or early mornings, typical hours are from 10am to 8pm. NO Experience necessary! We Teach Red Cross Lifeguard certification classes. (Hint: The Lifeguard class is your interview!)
Qualifications: Must have Red Cross Lifeguard Certification Students must pass a pre-course swimming skills test prior to taking lifeguarding courses.
Apply Today! Click apply and enter your contact information, you will then be automatically directed to fill out a short 1 page application. When completed you will get an email from the manager with the next steps and to schedule you.

Spend your Summer getting paid to be at the pool! We hire and train Lifeguards to work at private residential community pools. NO Experience necessary! We Teach Red Cross Lifeguard certification classes.
Benefits: We Pay Overtime! NO Split shifts that make it hard to get hours. NO Late nights or early mornings, typical hours are from 10am to 8pm. NO Experience necessary! We Teach Red Cross Lifeguard certification classes. (Hint: The Lifeguard class is your interview!)
Qualifications: Must have Red Cross Lifeguard Certification Students must pass a pre-course swimming skills test prior to taking lifeguarding courses.
Apply Today! Click apply and enter your contact information, you will then be automatically directed to fill out a short 1 page application. When completed you will get an email from the manager with the next steps and to schedule you.

Spend your Summer getting paid to be at the pool! We hire and train Lifeguards to work at private residential community pools. NO Experience necessary! We Teach Red Cross Lifeguard certification classes.
Benefits: We Pay Overtime! NO Split shifts that make it hard to get hours. NO Late nights or early mornings, typical hours are from 10am to 8pm. NO Experience necessary! We Teach Red Cross Lifeguard certification classes. (Hint: The Lifeguard class is your interview!)
Qualifications: Must have Red Cross Lifeguard Certification Students must pass a pre-course swimming skills test prior to taking lifeguarding courses.
Apply Today! Click apply and enter your contact information, you will then be automatically directed to fill out a short 1 page application. When completed you will get an email from the manager with the next steps and to schedule you.

Daily Instruments is seeking an Assembly Technician to join our rapidly growing manufacturing team. This position is responsible for assembly of thermal-instrumentation products that are used in refinery and chemical plant facilities. Assembly Technicians are responsible for working in a cohesive team environment to produce sub-assemblies, and final products as well as coordinating onsite work with engineering, inspections, machine shop and other production personnel. The successful Assembly Technician will ensure that projects are completed safely, in strict compliance with ISO & QA requirements, and in a timely basis to meet shipping requirements.
This is an Entry-Level, Full-Time, Hourly, Non-Exempt production shop position.
Climate-Controlled facility all year round.
Shifts Available: First Shift: Monday - Friday 5:00 am - 1:30 pm Second Shift: Monday - Friday 1:30 pm - 10:00 pm
OT and weekend hours for both shifts assigned as needed to meet production needs.
Assemblers perform tasks that are necessary to the production process. Assemblers aid in the fabrication, maintenance, and repair of component parts and products Carry out assembly day-to-day work instructions to ensure accurate assembly of products Read and understand safety instructions and ensure all safety rules and procedures are followed Focus on quality control of assembled products Read and understand technical drawings, specifications Performs work by following assembly work instructions, technical specifications, and parts lists; gathering parts, subassemblies, tools, and materials. Cutting, stripping, bending, fastening, and working with hand-held tools Documents actions by completing production/worktime tracking and quality forms. Contributes to team effort by accomplishing related results as needed
Benefits: 100% Company paid Employee Only Medical Health Savings Account with Employer contribution 100% Company paid Life Insurance Paid Time Off Paid Holidays 401K with Employer match Medical Plan options available (two medical plans, dependent/family coverage) Health Savings Account Flexible Savings Account Optional Voluntary Benefits (including: Dental, Vision, Supplemental Life Insurance, Disability (short-term & long-term), Accident Insurance)
Qualifications: Team Work orientation Dependable and Reliable production orientation Experience working in a manufacturing or fabrication environment preferred Proficient knowledge of measuring equipment such as micrometers, dial indicators, calipers, and scaled rules Working knowledge of hand power tools, and other hand-held tools Able to lift up to 100 pounds Must be legally authorized to work in the US for any employer other than current employer Must be fluent in English, any other language skills are beneficial This position is considered SHOP/INDOOR WORK Additional work hours assigned as need to meet production goals Climate-controlled facility all year round
Daily Instruments has deeply invested in providing a safe and healthy work environment, including on-site cleaning staff, disinfecting air-filtration systems installed in all HVAC systems, office air purifiers, disinfecting lighting in communal areas, company provided COVID supplies (including masks, face/eye protection, hand-sanitizer).   Daily Instruments/Daily Thermetrics is committed to leveraging the talent of a diverse workforce to create great opportunities for our business and our people. EOE/AA. Minority/Female/Sexual Orientation/Gender Identity/Disability/Veteran.

Daily Instruments is seeking an entry-level Machine Shop Helper to join our rapidly growing manufacturing team. This position will assist with the setup, parts delivery, monitoring, operation, cleaning of machines in machine shop. Shop Helpers are responsible for working in a cohesive team environment to ensure all production goals are in compliance with customer requirements. The successful Machine Shop Helper will ensure that assigned tasks are completed safely, in strict compliance with ISO & QA requirements, and in a timely basis to meet production & shipping requirements.
This is a Full-Time, Hourly, Non-Exempt production shop position.
Machine Shop Helper position will be on: Production Second Shift Monday - Friday 1:30 pm - 10:00 pm
This position is considered shop/indoor work; but will also work in outdoor loading dock area Additional work hours assigned as need to meet production goals Climate-controlled facility all year round
Responsibilities: Machine Shop Helpers perform tasks that are necessary to the production process. Carry out assembly day-to-day work instructions to ensure accurate and timely production goals Read and understand work instructions. Assist with maintaining, operating, cleaning machines Maintain a clean, orderly work environment Contributes to team effort by accomplishing related results as needed
Qualifications: Team Work orientation Basic understanding of shop math Dependable and Reliable production orientation Working knowledge of hand power tools, and other hand-held tools Able to lift up to 50 pounds Must be legally authorized to work in the US for any employer other than current employer Must be fluent in English, any other language skills are beneficial
Benefits: 100% Company paid Employee Only Medical Health Savings Account with Employer contribution 100% Company paid Life Insurance Paid Time Off Paid Holidays 401K with Employer match Medical Plan options available (two medical plans, dependent/family coverage) Health Savings Account Flexible Savings Account Optional Voluntary Benefits (including: Dental, Vision, Supplemental Life Insurance, Disability (short-term & long-term), Accident Insurance)
Daily Instruments/Daily Thermetrics is committed to leveraging the talent of a diverse workforce to create great opportunities for our business and our people. EOE/AA. Minority/Female/Sexual Orientation/Gender Identity/Disability/Veteran   Daily Instruments has deeply invested in providing a safe and healthy work environment, including on-site cleaning staff, disinfecting air-filtration systems installed in all HVAC systems, office air purifiers, disinfecting lighting in communal areas, company provided COVID supplies (including masks, face/eye protection, hand-sanitizer)