Performance Engineer (Test Cell)San Antonio, TXBuild an Aviation Career You're Proud OfAt StandardAero, we use our ingenuity and know-how to find solutions for the simple to the most complex challenges in aviation. Together, we get the job done and done well. Our stability, resources, and respectful culture supports you in building a solid career with a great team you can count on day in and day out for the long term.As a Performance Engineer (Test Cell), you'll use your sound understanding of the underlying theoretical principles and concepts associated with the subject area and an understanding of the relation of these to the responsibilities of the job.What you'll do:Performs engineering troubleshooting related to engine performance including analyzing problems, performing engineering calculations and communicating solutions to appropriate staff.Designs, implements and maintains diagnostic test cell tools and analysis toolkit.Performs trend monitoring of engine test cell and engine performance.Troubleshoots engine vibration occurrences using advanced signature analysis methods.Controls test cell correlation activities and engine performance data reduction software methods.Provides engineering troubleshooting support to service centre networks.Prepares guidelines for the determination of engine build criteria.Serves as business unit liaison with central engineering on test cell facilities issues, including identifying facilities needs of the business unit and coordinating specifications and procurement.Serves as the prime contact with the original equipment manufacturer for the interchange of strategic engineering data.Prepares detailed technical reports in order to document information related to the understanding of relevant technology.Coordinates activities with the Central Performance Engineering team.Responsible for observing all applicable safety requirements and reporting any unsafe practices/conditions.Carries out special projects as assigned.What skills you will use: 3+ years of related work experience representing continuous learning.Ability to read, understand and interpret blueprints.Working knowledge of measuring instruments.Strong planning, organizational, analytical, leadership, interpersonal, decision making, oral and written communication skills.Skilled in data analysis and querying.University degree in mechanical or aerospace engineering; or equivalent.Benefits that make life better:Comprehensive Healthcare401(k) with 100% company match; up to 5% vestedPaid Time Off starting on day oneBonus opportunitiesHealth- & Dependent Care Flexible Spending AccountsShort- & Long-Term DisabilityLife & AD&D InsuranceLearning & Training opportunitiesRaising the Standard of Excellence since 1911With over a century of proven excellence, StandardAero has become an industry leader in MRO services and customized solutions in the aerospace field. Our shared values and learning-based culture inspire our team to exceed their potential and power our customers' missions worldwide. With on-the-job training, advancement opportunities, and excellent benefits, StandardAero invites you to experience a fulfilling and meaningful career with us.Inclusivity Is Our StandardStandardAero offers equal employment opportunities for all. Our supportive environment celebrates diversity with no room for harassment or discrimination of any kind. We invite you to bring your authentic self to our team and experience our welcoming culture. #Standard Aero

Build your best future with the Johnson Controls Team As a global leader in smart, healthy and sustainable buildings, our mission is to reimagine the performance of buildings to serve people, places and the planet. Join a winning team that enables you to build your best future! Become a member of the Johnson Controls family and thrive in an empowering company culture where your voice and ideas will be heard – your next great opportunity is just a few clicks away!What we offerCompetitive salary starting at $72,000, sign-on and bonus plan!Paid vacation/holidays/sick time – 15 days of vacation, 5 sick days, 3 floating holidaysComprehensive benefits package including but not limited to; 401k, Medical, Dental and Vision care – Available day oneCompany vehicleEncouraging and collaborative team environmentCheck us Out: A Day in a Life at Johnson Controls | Sales Roles - YouTubeWhat you will do OurEarly CareerSales Engineering(BEST) Programis a 6-monthtechnical sales development programfor Recent College Graduates thatfocuses on creating market share by strategic selling Johnson Controls’HVACproducts and services to commercial customers.In this program you will have a chance to apply your technical engineering knowledge and business acumen to work with customers to better understand their product and project needs by being the subject matter expert. As part of the program, you will participate in a 6-month training and development program combining classroom, field orientation, and on the job training. You will learn our mechanical equipment and service offerings, customer relationship techniques and leadership skills in preparation for supporting customers in your territory alongside the sales team. You will be prepared to consult with architects, engineers, and building owners on product selections; partner with and learn from internal experts and deliver on business goals. You will be a critical part of a local sales team and a national network of sales professionals.#BESTHow you will do it Estimate job bids and prepare proposals with contractors, architects and building owners Coordinate with vendors and subcontractors Complete sales calls to generate new business and build on existing relationships Present solutions to customers for consideration Collect and analyze market intelligence Turn projects over to operations team for execution and installationsWhat we look forRequired: Currently pursuing a Bachelor’s degree in Business, Engineering or equivalent and graduating in December 2024 and or May/June 2025, Program starts June 2025Strong analytical ability to solve programs and ability to learn quickly Ability to manage multiple projects and cross-functional teams with minimum guidance Strong communication and teamwork skills U.S. Citizenship or Permanent ResidencyPreferred:Mechanical or Industrial Engineering Degree, strongly preferredPrevious sales or engineering experiences through co-ops, internships, part-time or full-time jobs (preferred)

ADVANCING OUR OPERATIONSIn order for us to complete our missions, our technology simply cannot fail. Covering a wide range of specialties ranging from aeronautical and computer systems to flight test and mechanical, Developmental Engineers provide advanced skill and knowledge of their particular specialties. Responsible for everything from the planning to implementation of their projects, these experts are essential to the success of operations all over the world.REQUIREMENTSYou must meet several requirements before joining the Air Force. These concern your background, overall health and other standards set by the Air Force, Department of Defense and federal law.Minimum EducationBachelor’s degree in engineering related to one of the following specialties: aerospace, aeronautical, astronautical, computer, electrical, electronics, communication or mechanicalQualificationsCompletion of the Defence Acquisition UniversityFundamentals of SystemsAcquisition Management course or Acquisition Fundamentals courseCompletion of the Air Force Flight Test Engineer course or comparableMinimum of 24 months of experience in qualified position or a master’s degree in a specified discipline and 12 months’ experience or a Doctor of Philosophy degree in a specified disciplineCompletionof Officer Training School (OTS), AirForce Academy (AFA) or AirForce Reserve Officer Training Corps (AFROTC)Must be between the ages of 18 and have not reached your 42ndbirthday

Overview: GovCIO is currently hiring for an Information System Security Engineer (ISSE) to support the USAF at Port San Antonio, Lackland Annex. Candidate will be involved in designing, implementing and securing information systems, conducting risk assessments and ensuring compliance with security standards and best practices. Responsibilities: The ideal candidate primary function is:Support the authorization of systems through the Risk Management Framework(RMF) to get an Interim Authority to Operate (IATO) or ATOSupport the categorization of Information System(s) (IS) to be accredited through the RMF process and support the development of the System Security Plan (SSP)Support the determination and selection of the required and/or applicable security controls to include the development of Memorandum of Understanding (MOU) or Memorandum of Agreement (MOA) for external systems and the development and implementation of an IS Continuous Monitoring (ISCM) planSupport the implementation of selected security controls specified in the SSP to the IS and its environment of operationSupport the development, review, and approval of Security Assessment Plan (SAP) and System Assessment Report (SAR)Perform periodic security scans and remediating findings based on the scan resultsSupport the development of the Plan of Action and Milestones (POA&M) and the development and update of the Security Authorization Package (SAP)Perform periodic assessment of the IS' security controls and develop the periodic ISCM report Qualifications: Clearance: TS SCIHigh School with 10+ years (or commensurate experience)Active Top Secret/SCI eligible security clearanceVMware Certified Professional certificationTechnical training related to Information Technology, Cyber Security, Computer Science, or related disciplineAt a minimum, an up-to-date Information Assurance Technical (IAT) Level II baseline certification5 years' knowledge and experience in installing, maintaining, and using ACAS, HBSS, SCAP and other cybersecurity related toolsAt least HBSS or ACAS certification/training certificate or both (both courses are desired)Cybersecurity and IT related knowledge and experienceRMF knowledge and experienceProficiency in Microsoft Word, PowerPoint, ExcelDesired qualifications:Kibana and LogstashEvaluate-STIGMicrosoft Active Directory and Group Policy ManagementVMWare vSphere, vCenter, and Horizon ViewBoth HBSS & ACAS certification/trainingFamiliar with the evaluation/implementation processes for DISA STIGs to include Windows Server 2016, Server 2019, Windows 10 and VMWare ESxi hosts5+ years of experience with Microsoft Windows and Server configuration and administration5+ years of experience with implementing VMware, Linux, and Windows STIGs#NSS#DL Company Overview: GovCIO is a team of transformers--people who are passionate about transforming government IT. Every day, we make a positive impact by delivering innovative IT services and solutions that improve how government agencies operate and serve our citizens.But we can't do it alone. We need great people to help us do great things - for our customers, our culture, and our ability to attract other great people. We are changing the face of government IT and building a workforce that fuels this mission. Are you ready to be a transformer We are an Equal Opportunity Employer.All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, gender, gender identity or expression, sexual orientation, national origin, disability, or status as a protected veteran. EOE, including disability/vets. Posted Pay RangeThe posted pay range, if referenced, reflects the range expected for this position at the commencement of employment, however, base pay offered may vary depending on multiple individualized factors, including market location, job-related knowledge, skills, education, experience, and internal equity. The total compensation package for this position may also include other compensation elements, to be discussed during the hiring process. If hired, employee will be in an “at-will position” and the GovCIO reserves the right to modify base salary (as well as any other discretionary payment or compensation program) at any time, including for reasons related to individual performance, GovCIO or individual department/team performance, and market factors. Posted Salary Range: USD $108,000.00 - USD $120,000.00 /Yr.

Build an Aviation Career You're Proud OfBuild your career with integrity by working at a company that doesn't just treat you like a number. You'll get the tools to do things right in a clean and safe work environment and the trust to fix any issue that comes your way. Our on-the-job training and team of experts mean you'll be set up for success.StandardAero is searching for an Electrical Engineer to join our Test Facility Engineering Team.In this exciting and challenging role you will be responsible for design, manufacturing, implementing, testing, troubleshooting and maintaining electrical/electronic systems for testing gas turbine engines and test facilities.The Test Facility Engineering Team is responsible for maintaining 51 global Engine Test Facilities, integrating new engine test platforms and sustainment activities for existing test facilities. StandardAero services engines from manufacturers including General Electric, Pratt and Whitney, Rolls Royce, and Honeywell plus others. Members of our team occasionally have the opportunity to travel to remote sites which include several U.S. locations, Canada, the Netherlands, Singapore, UK and Australia.The selected candidate will be part of a team consisting of Electrical, Mechanical, Performance and Computer Engineers as well as Designers to create systems that are compliant, innovative, reliable, maintainable, and easy to operate.As the part of the Electrical group within this team, the selected candidate will have the need to take design documentation and transform it into electrical specifications.What you'll do:Design and integrate electrical engine and facility control systems using PLC, instrumentation and custom design software. Interpreting manuals and technical documentation to create requirements and specification for implementation. Support current engine test cell engine/facility control systems including thrust/torque measurement systems, oil and water cooling systems, fuel storage, and fuel supply.Work as an individual or part of a team to design, install, commission, test electrical/electronic systems to support operations.Create and maintain project documentation including requirement specifications, acceptance test plans, detailed drawings and calibration and operation procedures. Education Requirements:0-5 minimal years of Electrical Engineering Design experienceBachelor's degree in Electrical EngineeringPosition Requirements:Possess a PE designation or eligible for membership registration with the State of Texas Knowledge of electrical and electronic system design and documentation processesStrong organizational and decision making capabilitiesExcellent verbal and written communication skillsDemonstrated ability to learn new technical skillsWilling and able to work in a fast pace and changing environmentAbility to travel to the United States, Canada, South Africa, Asia, Australia, and Europe.Ability and willingness to travel up to 35% of the time.Driven by working in a team environmentWe will support relocation from Canada an work through greencard sponsorship.Benefits that make life better:Comprehensive Healthcare401(k) with 100% company match; up to 5% vestedPaid Time Off starting on day oneBonus opportunitiesHealth- & Dependent Care Flexible Spending AccountsShort- & Long-Term DisabilityLife & AD&D InsuranceRaising the Standard of Excellence since 1911With over a century of proven excellence, StandardAero has become an industry leader in MRO services and customized solutions in the aerospace field. Our shared values and learning-based culture inspire our team to exceed their potential and power our customers' missions worldwide. With on-the-job training, advancement opportunities, and excellent benefits, StandardAero invites you to experience a fulfilling and meaningful career with us.Inclusivity Is Our StandardStandardAero offers equal employment opportunities for all. Our supportive environment celebrates diversity with no room for harassment or discrimination of any kind. We invite you to bring your authentic self to our team and experience our welcoming culture. #Standard Aero

Unleash your potential with the Johnson Controls team!As a global leader in smart, healthy and sustainable buildings, our mission is to reimagine the performance of buildings to serve people, places and the planet.Join our winning team and pave the way for a bright future.With our extensive reach across various industries worldwide, our teams are uniquely positioned to support and empower you. You will have the opportunity to develop yourself through meaningful work projects and learning opportunities. We strive to provide our employees with an experience, focused on supporting their physical, financial, and emotional wellbeing.Join the Johnson Controls family and thrive in a culture that values your voice and ideas.Your next incredible opportunity is just a few clicks away!Here's what we have to offer:Competitive PayPaid vacation, holidays, and sick time.Comprehensive benefits package, including 401K, medical, dental, and vision care - available from day one.Extensive product and on-the-job/cross-training opportunities, supported by our outstanding internal resources.Encouraging and collaborative team environment.Dedication to safety through our Zero Harm policy.JCI Employee discount programs (The Loop by Perk Spot).Check us out: A Day in the Life of the Building of the Future - https://youtu.be/pdZMNrDJviY]What you will do:Responsible for developing and maintaining bill of material information for all products manufactured inthe plant. Responsible for maintaining the complete master item with the correct parameters for the properuse of the MRP system. Must be able to coordinate with the different areas of the plant the correct andappropriate generation of views / parameters of all the part numbers existing in the plant. Responsible forcoordinating changes to the product with the different areas of the plant and ensuring that the effectivedates in the MRP system are correct to ensure the effective implementation of productsHow you will do it:Under general/minimal supervision/direction, operate with a high degree of independence on individual projects geared to efficient and successful planning and execution of tests.Able to handle several concurrent projects while providing ongoing, day-to-day, hands-on test guidance, test data review and analysis, and interacting with external customers.Possess strong verbal and written communication skills.Update the revision and/or drawing field in the MRP system.Release technical information in the different servers and databases of new drawings or new drawing revisions. Also responsible for removing obsolete versions and save them in obsolete folders.Elaboration and filling of Engineering Changes (ECN).Creation and maintenance of product structures (BOM).Creation of new parts in MRP based on the generation of ECNs provided by the different Design Centers.Extend part numbers from other plants to local plant. Once the parts have been extended, we proceed to update the views and parameters corresponding to the area.Make changes to the current BOMs indicating the corresponding Engineering change number ECN.Generate the BOMs and part numbers of a product by loading all the components that integrate it as purchase parts, raw material, manufactured parts, sub-assemblies, general assemblies and reference drawings in the master material of the MRP system. Manufacturing Engineering ManagerCoordinate the product change board (CCB).Coordination and follow-up of Engineering Changes in the EC Home tool.Responsible for the effective dates in MRP once the changes have gone through the implementation phases and the dates were defined by the involved departments.Sending notifications of the different Engineering changes by email to the users every time they are required to perform any activity related to the product change.Coordination and follow-up of Deviations with the corresponding areas.Generation of weekly reports of ECNs for the follow-up of the Product Engineers.Responsible for weekly audits of product parameters in MRP. Maintain 100% in the results of the audits performed. Determine root cause analysis and solution plans for when errors are found in the audits.Maintain deviation metrics by ensuring that the ATP phase does not exceed 2 days and that the ATP phase is completed in no more than 5 days.Responsible for always ensuring that the deviations procedure is known by all and that other departments follow it. This will be reflected with metrics compliance.Generate and update Engineering procedures for ISO9000 compliance.Engineering representative of the MRB committee to attend and coordinate the differences reported by warehouse and materials.Responsible for NPI activities and coordinating with manufacturing team to implement all process changes required.What we look for:Bachelor’s degree in mechanical engineering or equivalent; experience required a minimum of two years of progressive experience in Engineering. Knowledge of ISO9001, OHSAS 18001, ISO 14001, JCMS, Production Control, Ergonomics, Poka Yoke Systems, Core Tools, Problem Solving Methodology, Innovation, Lean Manufacturing, Kaizen, SMED, KANBAN, VSM, 5s, TPM, Sigma, BBPs, KPIs. Advanced knowledge of Office tools, Knowledge of MRP systems (Mapics AS400).JCI employees are valued members of the Johnson Controls family. They are dedicated, skilled, and passionate individuals who contribute to the success and growth of our company. We prioritize creating a positive and inclusive work environment that fosters collaboration, innovation, and personal development. Our employees are encouraged to voice their ideas and opinions, knowing that they will be heard and valued. We believe in investing in our employees' well-being, providing competitive salaries, comprehensive benefits packages, and opportunities for career advancement. With a strong emphasis on safety and a commitment to sustainability, JCI employees play a crucial role in shaping a smarter, healthier, and more sustainable future for buildings and communities worldwide.

PREVENTING ENVIRONMENTAL HARMWe go to extraordinary measures to protect our Airmen from environmental hazards and infractions. Applying engineering and scientific principles, Bioenvironmental Engineers identify and evaluate potential dangers and develop programs to prevent illness and injury. With an emphasis on discovering problems before they occur, these specialists ensure the health and safety of Airmen and their families in environments all over the world.REQUIREMENTSYou must meet several requirements before joining the Air Force. These concern your background, overall health and other standards set by the Air Force, Department of Defense and federal law.Minimum EducationBachelor of Science in engineering from an ABET-accredited institutionQualificationsCompletion of qualifying Bioenvironmental Engineering courseMinimum of 24 months of experience in bioenvironmental engineering assignmentsCompletion of Officer Training School courseMust be between the ages of 18 and have not reached your 42ndbirthday

Build an Aviation Career You're Proud OfBuild your career with integrity by working at a company that doesn't just treat you like a number. You'll get the tools to do things right in a clean and safe work environment and the trust to fix any issue that comes your way. Our on-the-job training and team of experts mean you'll be set up for success.StandardAero is searching for a Mechanical Engineer to join our Test Facility Engineering Team.In this exciting and challenging role you will be responsible for design, manufacturing, implementing, testing, troubleshooting and maintaining Mechanical systems for testing gas turbine engines and test facilities.The Test Facility Engineering Team is responsible for maintaining 51 global Engine Test Facilities, integrating new engine test platforms and sustainment activities for existing test facilities. StandardAero services engines from manufacturers including General Electric, Pratt and Whitney, Rolls Royce, and Honeywell plus others. Members of our team occasionally have the opportunity to travel to remote sites which include several U.S. locations, Canada, the Netherlands, Singapore, UK and Australia.The selected candidate will be part of a team consisting of Electrical, Mechanical, Performance and Computer Engineers as well as Designers and Project Managers to create systems that are compliant, innovative, reliable, maintainable, and easy to operate.Responsibilities will include:Direct the planning, design, engineering, procurement, cost, scheduling, construction, commissioning and troubleshooting activities of multiple major projects by coordinating effort of various internal departments, project teams and outside consulting resources.Prepare conceptual and detailed design of major engineering projects requiring mechanical considerations. Manage projects based on approved timelines and project management principles. Provide technical and financial data for preparation of project justification and cost benefit analysis.Review and evaluate contracts for work to be performed by consultants and outside contractors, approve plans and designs and resolve problems as they arise.Monitor all work in progress to ensure that quality and engineering standards are met. Act as a liaison with internal and external customers, assuring satisfaction with progress and quality. Participate in projects as a team member and/or team project leader.Carry out special duties as assigned.Ability to travel to the United States, Canada, South Africa, Asia, Australia, and Europe.Ability and willingness to travel up to 35% of the timeEducation Requirements: University degree in Mechanical or Industrial Engineering4 plus years of experiencePosition Requirements:Experience with mechanical designs and related instrumentation.Experience working with hydraulics, compressed air and fuel systems. Working knowledge of PCs in the current company operating system environment.Strong planning, organizational, analytical, interpersonal, decision making, oral and written communication skills.Strong project management skills.Experience with project management in a manufacturing environment.Working knowledge of federal and provincial fire, building, plumbing and electrical codes an asset.Working knowledge of gas turbine engines and specific product knowledge an asset.Benefits that make life better:Comprehensive Healthcare401(k) with 100% company match; up to 5% vestedPaid Time Off starting on day oneBonus opportunitiesHealth- & Dependent Care Flexible Spending AccountsShort- & Long-Term DisabilityLife & AD&D InsuranceRaising the Standard of Excellence since 1911With over a century of proven excellence, StandardAero has become an industry leader in MRO services and customized solutions in the aerospace field. Our shared values and learning-based culture inspire our team to exceed their potential and power our customers' missions worldwide. With on-the-job training, advancement opportunities, and excellent benefits, StandardAero invites you to experience a fulfilling and meaningful career with us.Inclusivity Is Our StandardStandardAero offers equal employment opportunities for all. Our supportive environment celebrates diversity with no room for harassment or discrimination of any kind. We invite you to bring your authentic self to our team and experience our welcoming culture. #Standard Aero

BEST - FireBuild your best future with the Johnson Controls TeamAs a global leader in smart, healthy and sustainable buildings, our mission is to reimagine the performance of buildings to serve people, places and the planet. Join a winning team that enables you to build your best future! Become a member of the Johnson Controls family and thrive in an empowering company culture where your voice and ideas will be heard – your next great opportunity is just a few clicks away! What we offerCompetitive salary starting at $56k base, plus guaranteed commission and sign-on bonus with total compensation of $83kPaid vacation/holidays/sick time – 15 days of vacation, 5 sick days, 3 floating holidaysComprehensive benefits package including but not limited to; 401k, Medical, Dental and Vision care – Available day oneEncouraging and collaborative team environmentCheck us Out: A Day in a Life at Johnson Controls | Sales Roles - YouTubeWhat you will doOur Early CareerSales Engineering (BEST) Program is a 6-month technical sales development program for Recent College Graduates that focuses on creating market share by strategic selling Johnson Controls’ Fire products and services to commercial customers. In this program you will have a chance to apply your technical engineering knowledge and business acumen to work with customers to better understand their product and project needs by being the subject matter expert. As part of the program, you will participate in a 6-month training and development program combining classroom, field orientation, and on the job training. You will learn our mechanical equipment and service offerings, customer relationship techniques and leadership skills in preparation for supporting customers in your territory alongside the sales team. You will be prepared to consult with architects, engineers, and building owners on product selections; partner with and learn from internal experts and deliver on business goals. You will be a critical part of a local sales team and a national network of sales professionals. #BEST How you will do itEstimate job bids and prepare proposals with contractors, architects and building owners Coordinate with vendors and subcontractors Complete sales calls to generate new business and build on existing relationships Present solutions to customers for consideration Collect and analyze market intelligence Turn projects over to operations team for execution and installationsWhat we look forRequired:Currently pursuing a Bachelor’s degree and graduating in December 2024 and May/June 2025 Program starts January 13, 2025 or June 9, 2025Strong analytical ability to solve problems and ability to learn quickly Ability to manage multiple projects and cross-functional teams with minimum guidance Strong communication and teamwork skills U.S. Citizenship or Permanent ResidencyPreferred:Electrical or Mechanical Engineering Degree, strongly preferred Previous sales, engineering or business experiences through co-ops, internships, part-time or full-time jobs

Build an Aviation Career You're Proud OfBuild your career with integrity by working at a company that doesn't just treat you like a number. You'll get the tools to do things right in a clean and safe work environment and the trust to fix any issue that comes your way. Our on-the-job training and team of experts mean you'll be set up for success.StandardAero is searching for a Computer Engineer to join our Central Engineering team, with 0-5 years' experience.In this exciting and challenging role, you will design data acquisition and control systems for testing gas turbine engines. Testing engines is an integral part of StandardAero's process to certify our work and to ensure that the engines are safe and reliable. StandardAero services engines from manufacturers including General Electric, Pratt and Whitney, Rolls Royce, Safran and Honeywell. To support this activity, we operate Engine Test Facilities around the globe. We provide support to our test facilities and our team has the opportunity to travel to remote sites which include several U.S. locations, Europe, and Singapore.As a Computer Engineer you will work with part of the Central Engineering team, you will work with computer, electrical and mechanical engineers/technologists to create systems that are accurate, maintainable and easy to operator. You will be involved in every aspect of the design and implementation of these test systems including estimating, requirements gathering, technical analysis, troubleshooting, component selection/purchasing, commissioning and production support. Some travel will be required.What you'll do:Develop software for Engine Test Cell data acquisition and control using C#, SQL, and LabVIEW.Integrate multiple data acquisition devices into a system capable of monitoring temperatures, pressures, rotational frequency, vibration, fluid flow rates, and other characteristics of a live running engine.Support current engine test systems by responding to test failures, implementing new feature requests, and updating due to test requirement change or strategic initiatives.Communicate with stakeholders, OEM's and co-workers to gather needs/wants and translate them into technical requirements.Education Requirements:University degree in Computer Engineering with experience in software development, control systems, or data acquisitionPosition Requirements:The position requires an understanding and application of data acquisition principles with majority of the activity focused on software development.Knowledge of software design and documentation processes.Experience with Microsoft Visual Studio, .NET.Knowledge of database architecture and design.Familiarity with software development and build toolsStrong capabilities for organization, decision making, and verbal and written communication.Experience with troubleshooting technical problems and providing solutions.Ability to travel to the United States, Canada, South Africa, Asia, Australia, and Europe.Ability and willingness to travel up to 35% of the time.Preferred Requirements:Experience with National Instruments LabVIEW.Experience with C# and SQL.Experience using Data Acquisition Systems to acquire and analyze data.Experience with control systems.Benefits that make life better:Comprehensive Healthcare401(k) with 100% company match; up to 5% vestedPaid Time Off starting on day oneBonus opportunitiesHealth- & Dependent Care Flexible Spending AccountsShort- & Long-Term DisabilityLife & AD&D InsuranceRaising the Standard of Excellence since 1911With over a century of proven excellence, StandardAero has become an industry leader in MRO services and customized solutions in the aerospace field. Our shared values and learning-based culture inspire our team to exceed their potential and power our customers' missions worldwide. With on-the-job training, advancement opportunities, and excellent benefits, StandardAero invites you to experience a fulfilling and meaningful career with us.Inclusivity Is Our StandardStandardAero offers equal employment opportunities for all. Our supportive environment celebrates diversity with no room for harassment or discrimination of any kind. We invite you to bring your authentic self to our team and experience our welcoming culture. #Standard Aero

BEST - FireBuild your best future with the Johnson Controls TeamAs a global leader in smart, healthy and sustainable buildings, our mission is to reimagine the performance of buildings to serve people, places and the planet. Join a winning team that enables you to build your best future! Become a member of the Johnson Controls family and thrive in an empowering company culture where your voice and ideas will be heard – your next great opportunity is just a few clicks away! What we offerCompetitive salary starting at $56k base, plus guaranteed commission and sign-on bonus with total compensation of $83kPaid vacation/holidays/sick time – 15 days of vacation, 5 sick days, 3 floating holidaysComprehensive benefits package including but not limited to; 401k, Medical, Dental and Vision care – Available day oneEncouraging and collaborative team environmentCheck us Out: A Day in a Life at Johnson Controls | Sales Roles - YouTubeWhat you will doOur Early CareerSales Engineering (BEST) Program is a 6-month technical sales development program for Recent College Graduates that focuses on creating market share by strategic selling Johnson Controls’ Fire products and services to commercial customers. In this program you will have a chance to apply your technical engineering knowledge and business acumen to work with customers to better understand their product and project needs by being the subject matter expert. As part of the program, you will participate in a 6-month training and development program combining classroom, field orientation, and on the job training. You will learn our mechanical equipment and service offerings, customer relationship techniques and leadership skills in preparation for supporting customers in your territory alongside the sales team. You will be prepared to consult with architects, engineers, and building owners on product selections; partner with and learn from internal experts and deliver on business goals. You will be a critical part of a local sales team and a national network of sales professionals. #BEST How you will do itEstimate job bids and prepare proposals with contractors, architects and building owners Coordinate with vendors and subcontractors Complete sales calls to generate new business and build on existing relationships Present solutions to customers for consideration Collect and analyze market intelligence Turn projects over to operations team for execution and installationsWhat we look forRequired:Currently pursuing a Bachelor’s degree and graduating in December 2024 and May/June 2025 Program starts January 13, 2025 or June 9, 2025Strong analytical ability to solve problems and ability to learn quickly Ability to manage multiple projects and cross-functional teams with minimum guidance Strong communication and teamwork skills U.S. Citizenship or Permanent ResidencyPreferred:Electrical or Mechanical Engineering Degree, strongly preferred Previous sales, engineering or business experiences through co-ops, internships, part-time or full-time jobs

What you will do The Senior Electrical Engineer leads custom electrical design work for chiller solutions products. This position will be responsible for lead designer as well as coach for junior engineers and has responsibilities for creating product technical solutions and delivering design details on schedule to manufacturing teams.This position is onsite and based at our San Antonio, TX, plant for our large tonnage Chiller products and solutions. Interested candidates must be commuting distance, or open for relocation.How you will do itInvestigates and analyzes product design proposals on electrical power panels, control panels, variable speed drives and wire harnesses in accordance with UL, NEC, CSA, and CE codes, then recommends solutions.Proficient in electrical design and able to conceptualize and implement design ideas into the product.Proficient at preparing, checking, and coordinating the release of documentation to support designs.Responsible for technical direction to application engineers, designers, factory operations, product marketing, and product technical service.Responsible for the on-time completion of projects.Continuously increases expertise on all aspects of chiller electrical design, theory, construction, operation, and applications.Proficient at selecting the most suitable electrical components.Uses standard and advanced technical and mathematical principles, theories, concepts, techniques, processes, and best practices in field.Advances expertise and applies regulatory codes such as UL, NEC, CSA, and CE codes.Strives for continuous improvement and teamwork in a global product development and process environment.Adheres to the Company’s Code of Conduct and Business Ethics standards.Serves as primary SME for Electrical / Power Electronics issues at the facility.Leads, teaches and coaches others in interpreting and understanding engineering drawings including electrical schematics.What you will needRequired Bachelor’s degree in Electrical EngineeringMinimum 8 years applicable experience with UL, NEC, CSA, and CE codesSkilled in analyzing electrical loads, designing power and control circuitry, reviewing control logic, and practicing mathematical theories and conceptsAdvanced knowledge of electrical components including motors, inverter drives, soft starters, contactors, and circuit breakersStrong electrical aptitude